Salve a tutti,
sono nuovo di FreeNAS e di tutte le community, penso di aver inserito questo post nella sezione giusta se così non fosse avvisatemi.
Ho da poco tempo realizzato un nas con dei buoni componenti e sono anche riusciti a condividere la piscina in locale, ma ho servito anche fuori casa...
[DRAFT] open to comments
To setup a VPN server based on the Wireguard technology and running from within a Jail.
The VPN server would allow remote devices to connect and access resources in the local network
All remote traffic should be routed via the VPN channel
Here are the general guidelines in order to install FileRun in a FreeNAS jail.
The guide was written while I was actually installing the software, so I'm pretty sure that it is precise and correct.
Let me know if you have any questions or has any suggestion to improve the guide (including...
I just bought a UPS (APC Back-UPS CS 350) which seems to work very fine to shutdown my FreeNAS server.
But: I want more ;)
I want to shutdown other critical devices in my network automatically too.
Unfortunately, the other devices are really heterogenous, so I couldn't use any...
Running FreeNAS-11.2-U6. My configuration is that I have a server between the ISP and the rest of the internal network (including the FreeNAS system ("NAS1")); this server provides DNS, firewall services (beyond those provided by ISPs router) and other things. This configuration works great...
I just made a fresh freenas install, imported my old pool. I was once running plex, but it stop working some time ago ( that's one reason of the fresh install). now, I,m unable to reinstall it:
[EFAULT] Exception: CallError:[EFAULT] pkg error: - pkg-static: /var/db/pkg permissions (0770)...
Does anyone here have experience running dnsmasq in an iocage jail? (freenas 11.2).
I had dnsmasq working in a warden jail, but was forced to move it to iocage, and can't seem to get it working.
Seems like with every topic I find that appears similar to my issue, I just get completely lost with figuring anything out. So please, forgive my lack of knowledge/experience on this front.
What I have was a working iocage jail in FreeNAS 11.2-U5 that was previously using the same network as...
I just updated my system and I cannot go in jails screen in the user interface. Legacy web interface display screen, but lists no jail at all.
I have a jail up and running that I can ping and ssh into. It is just, I cannot see its status or up/down at will.
Can anyone else confirm if...
I posted my question originally here here but was politely redirected. The following text is copied from the original.
I have a FreeNAS Mini running with a jail for Nextcloud. While moving my files from Dropbox to the Nextcloud instance, I realized that there are many fastcgi timeouts...
Is it possible to run TrueOS in a jail on a TrueOS host? I actually mean a TrueOS jail, not a standard FreeBSD jail on a TrueOS host.
I'm asking because I tried to setup iocage in a TrueOS VM and on "iocage activate" just got an option for FreeBSD 11.2 or 12.0.
Is there any other jail tool I...
As thread header, is this possible or not ?
I want my nextcloud jail to see downloaded software in qbittorrent jail that has mountpint to /mnt/tank/download. is possible to mount this path to nextcloud or is it against zfs and BSD rules ?
Thanks for answers
Hello, I have what seems to be a working jail set up. It starts and I can even ping it on my local network. I can see its file directory but jexec always prints "jail "rclone" not found", whether that's using the shell in browser or through SSH. Also, my ram usage seems to massively drop when I...
I've got Resilio Sync plugin installed, and i've added 2 mount points (both from different datasets). Getting the permissions right on freenas is frustrating beyond anything I can explain. I've been using freenas for like 8 years now and still want to break something every time I go to do...
Hi, I'm new to the forum. FreeNas I set with tutorials on YouTube. My server has 16GB RAM, 2 TB storage. My question is whether I can install the inventorization system (OCS Inventory) in Jail. How is it possible for someone to have a step by step guide? I would be grateful !
TLDR version: I messed up the permissions on my only volume. Is there any way to fix it without deleting and recreating the volume?
My system's running FreeNAS 11.2, having upgraded in-place from 11.1. A few days/weeks ago I was notified that there was an update to 11.2.U4: I left it for a few...
Hi, really new user to this VPN stuff, and NAS aswell to be honest.
I've managed to install everything, it's up and running, but now I feel just lost. (I'm using this guide)
When I come to this section in the guide, OpenVPN Server Configuration, I dont know what settings I should use and it's...
I have a FreeNAS at home and 1 PC, I have installed transmission on NAS to download files to folder /media/download, jail has a mountpoint outside of jail to folder /mnt/tank/transmission/download.
Transmission corectly downloads to folder I see the files etc...no problem
This is my first post so you'll have to bear with me on this.
I'm currently experiencing an issue with the free version of the Plex Media Server plugin for FreeNAS. After updating to FreeNAS 11.2 U3, which fixed a bug preventing the creation of mount points with spaces, I have come...
I'm working on a Postfix plugin. Can anyone point me to the documentation of the settings.json file as used in iocage plugins? I have been able to find some examples (a, b), but no document describing the possibilities.
Platform AMD Ryzen 5 2600 Six-Core Processor
NIC: Intel X520 10G connected VIA DAC
I need some help here... I have lost hours and hours trying to troubleshoot this issue where I install a JAIL (resilio sync is the one I tried...
I have a pretty standard setup: FreeNAS 11.2-STABLE with some iocage plugins. For one of them, transmission, I made a modification to install nginx as a reverse proxy in order to enable TLS. However, whenever I update my jails with iocage update, it removes any extra package (including...
I've installed openvpn client in a jail - which is working fine (guide)
now I want to use the vpn connection with the deluge jail
Following the FreeBSD as router guideline
I've set gateway_enable="YES" in /etc/rc.conf
and set the vpn jail as gateway in deluge
but I cannot reach any...
I have updated from FreeNAS 11.2-U1 to FreeNAS 11.2-U2.
I can no longer start jails using DHCP. Jails configured with own IP appears to work as they should.
# iocage start foobar
* Starting foobar
+ Started OK
Traceback (most recent call last):
Hi guys, i was trying to configure a new Jail for UrBackup, and i do it like 2 times (on the same machine) because i got some errors, first i didnt get response from the ip address but that was my bad, and then i get response but it shows my an error "no permissions to access to the directory C...
What does the basejail parameter signify in the jail parameters?
[Unrelated but resolved:]
Additionally, I have 2 plugins and a jail, each with an associated static IP.
My router is able to see the active IPs of the two plugins but not the jail.
The only notable differences I saw in...
I'm currently trying to set up a NextCloud server and, while I'm setting up the iocage, I receive an error regarding the vnet0 interface. I've initialised a nextcloud jail with the following command: iocage create -n nextcloud -r 11.2-RELEASE ip4_addr="vnet0|192.168.0.21/24" vnet="on"...
Hello everyone, this will be long !
before heading to the problem i encounter here is a summary of my system and what i've done to it :
i5-4440 4 cores, 4 Threads 3.2Ghz
24GB 1600Mhz DDR3 RAM
MSI B85-G41 PC Mate
2x 3TB Seagate Barracuda 7200RPM HDD Striped
2x 16GB Kingston...
100$ BOUNTY FOR WHOEVER HELPS ME FIX THIS!!!
So i've been trying to get this right for about 5 days now. I had around 4 reinstalls because i locked myself out (flood/storms or something like that). Also a few CLI config restores happend.
I'll first try to explain what hardware i have...
Running FreeNAS 11.2-RELEASE-U1. All available/installed plugin are shown in the new UI but not in the classic. In the classic there are no plugins available. Same as jails. In the new UI i see the installed jails when moving to the classic UI there are no installed jails....
Yes it is...
I need help getting a nextcloud jail connecting to a AD server.
It used to work but now it isn't connecting to the AD.
FreeNAS ver: FreeNAS-11.1-U7
NextCloud jail ver: 10.0.0.1
My current config for the AD server on NexCloud is:
I'm trying to create new Jail in 11.2 version by using new GUI. Unfortunately, FreeNas is not letting me to create one and showing error:
I've checked available versions by using iocage list -r and it shows me, that 11.1 and 11.2 are fetched. Whole configuration of jail is set to...
I am very new to Freenas and have been reading and watching tutorials. I currently running 11.2 I have my Plex plugin working with my share media pool. I would like to get a torrent app working with Sonarr and Radarr along with the VPN I use PIA. I had deluge up but running a...
I've problems setting up a jail's network configuration. The server has two network adapters:
em0: 10.0.11.15 - main interface
em1: 10.0.91.15 - only for jails
I created a jail using the GUI. Settings:
IPv4 Interface: em1
IPv4 Address: 10.0.91.100...
Hello, I am going nuts over this.
I have a VLAN set as an interface for FreeNAS. I can access the UI from the VLAN IP and performing traceroute from my computer I can see that it is going through the router (instead of directly connecting like on the LAN) so no problems with the...
Followed this well-established guide to start.
Since I clearly do not have remote access running (heh),
I'll post jail parameters later when I get local access.
With regard to:
Should I be seeing something under the sockstat -4 -l command?
(Restarted entire system.)
I'm not sure if there is already a thread like this, if so please share the link with me, that would be very nice.
My question is, if there is any option to create a FreeNAS Plugin by myself and install it on my Server?
I'm looking for an Plugin like Plex but for Games (Web...
I'm a complete noob in FreeNAS and I need help in using the SHELL itself. I'm trying to update manually update my PLEX Jail. However, I'm running into an issue when i try to do a fetch -o. I get an authentication error. I would like to know what it means, and if you do is there any way around...
In "14.5.1. Managing iocage Jails" the user is explained how to "To open the console in the started jail, use iocage console" and right after that how to stop it: "Jails are shut down with iocage stop:"
But what isn't said is how to leave the jail after entering it via the command "iocage...
Hi i have just set up a openvpn client in a freenas 9.10u6 jail
The service is running and its listening on port 10011
When i put my .opvn file onto my phone it connects and shows upstream traffic but i get nothing downstream
i am unable to access the internet or devices on the network
I'd like to ask for a little help from someone more knowledgeable than me.
I've tried creating an iocage jail and installing unifi controler software on it. Been running it in the old jail system up till this evening and decided it would be a good idea to try and set it up as an...
Im attempting to install lazy librarian into 11.2 iocage. I found after a hard search there is a severe lack of install guides...something I'm quite dependent on being a freenas noob. so far I have muddled along using similar python based install guides:
Hi everyone. When creating a jail in FreeNAS prior to 11.2, it was very straightforward using basic mode to assigning a static IP. In 11.2, I have options to choose VNET, Berkeley Packet Filter and IPv4 Interface. If all I want to do is to mimic the old jail configuration to simply set a...
I have been having issues with my transmission jail so I decided to start from scratch. I have gone through setting up openVPN but here's the error I'm getting:
openvpn --config /usr/local/etc/openvpn/openvpn.conf
Wed Dec 5 18:32:08 2018 WARNING: file...
What is the simplest way to configure permissions for 11.2? I tried a few things out in RC2 and it was trickier than expected.
I will have multiple plugins, multiple jails, and multiple SMB shares all pointed at the same media with combinations of read-only as well as read/write.
I want to install openvpn in a jail; however,
the use of pkg install <anyProgram>
(including pkg install openvpn) states that
<anyProgram> isn't listed in the repository.
pkg: No packages available to install matching '<anyProgram>' have been found in the repositories
I do not believe that I...
I'm running PMS as a plug in, I do have 'plexpass' and it's working, but when I look for it under jails/plug-ins/vm I don't see it. But it is running!?
Here's the process
It seems that the old configuration is in...