gideonomalley
Cadet
- Joined
- Dec 2, 2018
- Messages
- 2
I've been running 11.1 on a loud 1U unit so I wanted to change over to something a little bigger and quieter. I recently picked up a different server to set up as my freenas and after installing 11.1-U6 and putting in the drives I can't find my old volumes in the system. This seems like a simple thing I'm overlooking.
I hope to be able to explain well enough what is going on.
Build FreeNAS-11.1-U6
Platform Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
Memory 16341MB
I can see the old drives when I open Shell and use:
The SanDisk is what the system boots from. The two seagates are what I'm trying to import. But I can't find those in the webserver gui. This new server has a RAID controller but I didn't set up the seagates in that, would that matter? What am I doing wrong?
I hope to be able to explain well enough what is going on.
Build FreeNAS-11.1-U6
Platform Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
Memory 16341MB
I can see the old drives when I open Shell and use:
camcontrol devlist
Code:
<SEAGATE ST3146855SS S527> at scbus0 target 0 lun 0 (pass0) <SEAGATE ST3146356SS XRHA> at scbus0 target 1 lun 0 (pass1) <ATA ST2000NM0011 SN03> at scbus0 target 2 lun 0 (pass2) <ATA ST2000NM0011 SN03> at scbus0 target 4 lun 0 (pass3) <DP BACKPLANE 1.05> at scbus0 target 8 lun 0 (ses0,pass4) <HL-DT-ST DVD-ROM GDR-T10N 1.02> at scbus1 target 0 lun 0 (cd0,pass5) <SanDisk Cruzer Glide 1.00> at scbus3 target 0 lun 0 (pass6,da0)
The SanDisk is what the system boots from. The two seagates are what I'm trying to import. But I can't find those in the webserver gui. This new server has a RAID controller but I didn't set up the seagates in that, would that matter? What am I doing wrong?
Last edited: