Robin Johansen
Cadet
- Joined
- Sep 22, 2013
- Messages
- 2
Hi,
I have a newly installed FreeNAS-9.1.1-RELEASE-x64 (a752d35)guest on an HP Proliant ML110 G7 server running VMware ESXi 5.1
VM config as follows:
1x vCPU w/4 cores
8192MB RAM
1x system drive (Virtual disk on LSI Logic Paralell)
2x WD Green 2TB to be exact, as Mapped RAW LUNs
ref: (http://blog.davidwarburton.net/2010/10/25/rdm-mapping-of-local-sata-storage-for-esxi/)
Challenge:
In "View disk"-tab i can see my two drives as connected, but in
ZFS Volume Manager does not show any available disks.
Any suggestions? Just for testing, I tried to install a 9.20 nightly build but same problem there also.
I have a newly installed FreeNAS-9.1.1-RELEASE-x64 (a752d35)guest on an HP Proliant ML110 G7 server running VMware ESXi 5.1
VM config as follows:
1x vCPU w/4 cores
8192MB RAM
1x system drive (Virtual disk on LSI Logic Paralell)
2x WD Green 2TB to be exact, as Mapped RAW LUNs
ref: (http://blog.davidwarburton.net/2010/10/25/rdm-mapping-of-local-sata-storage-for-esxi/)
Challenge:
In "View disk"-tab i can see my two drives as connected, but in
ZFS Volume Manager does not show any available disks.
Any suggestions? Just for testing, I tried to install a 9.20 nightly build but same problem there also.