Hi all,
Solo pool of a mirrored pair has been running for a little over a month now with no issues on 11.2-U1
Reset config to defaults, as expected needed to remount pools. No other config changes were actually made past making a user and SMB share.
When I try to do so via GUI (Storage -> Pools -> Add -> Import an existing pool etc). Drive is not encrypted. When I get to select the pool it is not in the list.
Spec: E3-1220v6, 8GB ECC, BCM5720 NIC, two mirrored WD 4TB. Specifically this PowerEdge T130, with two WD MyBooks shucked.
Output of
output of
Solo pool of a mirrored pair has been running for a little over a month now with no issues on 11.2-U1
Reset config to defaults, as expected needed to remount pools. No other config changes were actually made past making a user and SMB share.
When I try to do so via GUI (Storage -> Pools -> Add -> Import an existing pool etc). Drive is not encrypted. When I get to select the pool it is not in the list.
Spec: E3-1220v6, 8GB ECC, BCM5720 NIC, two mirrored WD 4TB. Specifically this PowerEdge T130, with two WD MyBooks shucked.
zpool import
(with and without -D) returns nothing.gpart status
returnsCode:
ada0p1 OK ada0 ada0p2 OK ada0 ada1p1 OK ada1 ada1p2 OK ada1 ada2p1 OK ada2 ada2p2 OK ada2
zpool status
returns just the freenas-boot pool, freenas-boot and ada2p2 as online (0/0/0).zdb -l /dev/ada0p1
etc returns "Failed to unpack" for all labels.camcontrol devlist
returns all drives.Output of
sqlite3 ..... "SELECT * FROM storage_disk;"
(storage_diskgroup is empty)Code:
{serial_lunid}50026B768236A5B0_50026b768236a5b0|ada2|ada|2|50026B768236A5B0|120034123776||||Auto|Always On|Disabled|Disabled|1|||| {serial_lunid}WD-WCC7K4SVUXFF_50014ee210707d5c|ada1|ada|1|WD-WCC7K4SVUXFF|4000787030016||||Auto|Always On|Disabled|Disabled|1|||| {serial_lunid}WD-WCC7K5SJA6ZU_50014ee265ac6fc7|ada0|ada|0|WD-WCC7K5SJA6ZU|4000787030016||||Auto|Always On|Disabled|Disabled|1|||| {serial_lunid}4C530001220815123100_SanDisk Cruzer Blade 4C530001220815123100|da0|da|0|4C530001220815123100|15664676864||||Auto|Always On|Disabled|Disabled|1||2019-03-12 12:33:36.252205||
output of
zpool history
Code:
History for 'freenas-boot': 2019-01-25.09:35:16 zpool create -f -o cachefile=/tmp/zpool.cache -o version=28 -O mountpoint=none -O atime=off -O canmount=off freenas-boot ada2p2 2019-01-25.09:35:16 zpool set feature@async_destroy=enabled freenas-boot 2019-01-25.09:35:16 zpool set feature@empty_bpobj=enabled freenas-boot 2019-01-25.09:35:16 zpool set feature@lz4_compress=enabled freenas-boot 2019-01-25.09:35:16 zfs set compress=lz4 freenas-boot 2019-01-25.09:35:16 zfs create -o canmount=off freenas-boot/ROOT 2019-01-25.09:35:22 zfs create -o mountpoint=legacy freenas-boot/ROOT/default 2019-01-25.09:36:33 zpool set bootfs=freenas-boot/ROOT/default freenas-boot 2019-01-25.09:51:56 zfs set beadm:nickname=default freenas-boot/ROOT/default 2019-01-25.09:51:56 zfs snapshot -r freenas-boot/ROOT/default@2019-01-25-17:51:56 2019-01-25.09:52:01 zfs clone -o canmount=off -o mountpoint=legacy freenas-boot/ROOT/default@2019-01-25-17:51:56 freenas-boot/ROOT/Initial-Install 2019-01-25.08:56:25 zfs set beadm:nickname=Initial-Install freenas-boot/ROOT/Initial-Install 2019-02-02.03:45:02 zpool scrub freenas-boot 2019-02-10.03:45:02 zpool scrub freenas-boot 2019-02-18.03:45:02 zpool scrub freenas-boot 2019-02-26.03:45:02 zpool scrub freenas-boot
Last edited: