I have a PCIe card that uses the JMB 360/363 chipset to support 2xsata 300 connections. The card is detected and the disks connected to it are reported during the bios boot and during the FreeNAS 8 Beta 3 boot. However when the boot process is complete the disks have disappeared.
The Motherboard has a JMB 360 controller which seems to work fine.
The JMB 360/363 chipset is reported as abing part of the ata(4) driver according tot he FreeNAS hardware compatability list.
Any ideas as to what to do next to get my disks working in FreeNAS.
The Motherboard has a JMB 360 controller which seems to work fine.
The JMB 360/363 chipset is reported as abing part of the ata(4) driver according tot he FreeNAS hardware compatability list.
Any ideas as to what to do next to get my disks working in FreeNAS.
