lorenzoASR
Dabbler
- Joined
- Nov 10, 2012
- Messages
- 39
Dear Forum,
I've just installed FreeNas and that is my configuration:
Host Name freenas
Version FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty)
Platform Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz
Memory 4080MB
System Clock Wed Jul 17 17:40:59 CEST 2013
Uptime 5:40PM up 1:08, 1 user
Average Load 0.11, 0.05, 0.01
Connected through 192.168.3.25
Network Settings:
NB: The system is on a 4GB flash SD, DHCP is not active on my router so I use static ip address
NB2: From freenas network work perfectly (i can connect outside, i can ping all i want)
NB3: This is a fresh installation
Now, i would to install some Plugins to enhance the power of the system, and I made those operations:
1) Created two ZFS Datasets into my Volume "firstHd": "pluginJail" and "pluginSave" , each of 4gb
2) Services->Plugin->Management->Settings (click)
----> step1 : save PBI into /mnt/firstHd
----> step2: path-plugin-jail = /mnt/firstHd/pluginJail
jail name = owncloudJail
jail IP = 192.168.3.30
jail IP netmask = /24 (255.255.255.0)
MAC = *empty* (automatic)
plugins-archive-path= /mnt/firstHd/pluginSave
----> step3: upload the jail's PBI FreeNAS-8.3.1-RELEASE-x64.Plugins_Jail.pbi
3) Services->Service Control->set ON to Plugins
Ok, now the Plugin Jail is running, i can see it by typing:
Now i want to see if network is working correcty, let's do some tests:
a) ping FREENAS (192.168.3.25) -> JAIL (192.168.3.30) (SUCCESS)
b) ping JAIL (192.168.3.30) -> FREENAS (192.168.3.25) (SUCCESS)
c) ping GW (192.168.3.1) -> JAIL (192.168.3.30) (FAILED)
d) ping JAIL (192.168.3.30) -> GW (192.168.3.1) (FAILED)
e) ping JAIL (192.168.3.30) -> WEB (8.8.8.8) (FAILED)
That's my problem!
I give you other infos: jail "ifconfig -a"
and the FREENAS "ifconfig -a"
I hope you have all the informations needed to solve this problem,
Thank you in advance!
Lorenzo
I've just installed FreeNas and that is my configuration:
Host Name freenas
Version FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty)
Platform Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz
Memory 4080MB
System Clock Wed Jul 17 17:40:59 CEST 2013
Uptime 5:40PM up 1:08, 1 user
Average Load 0.11, 0.05, 0.01
Connected through 192.168.3.25
Network Settings:
Code:
Name re0 IPv4 Address 192.168.3.25/24 Nameserver 192.168.2.10 - 8.8.8.8 Route default 192.168.3.1
NB: The system is on a 4GB flash SD, DHCP is not active on my router so I use static ip address
NB2: From freenas network work perfectly (i can connect outside, i can ping all i want)
NB3: This is a fresh installation
Now, i would to install some Plugins to enhance the power of the system, and I made those operations:
1) Created two ZFS Datasets into my Volume "firstHd": "pluginJail" and "pluginSave" , each of 4gb
2) Services->Plugin->Management->Settings (click)
----> step1 : save PBI into /mnt/firstHd
----> step2: path-plugin-jail = /mnt/firstHd/pluginJail
jail name = owncloudJail
jail IP = 192.168.3.30
jail IP netmask = /24 (255.255.255.0)
MAC = *empty* (automatic)
plugins-archive-path= /mnt/firstHd/pluginSave
----> step3: upload the jail's PBI FreeNAS-8.3.1-RELEASE-x64.Plugins_Jail.pbi
3) Services->Service Control->set ON to Plugins
Ok, now the Plugin Jail is running, i can see it by typing:
Code:
[root@freenas] /# jls JID IP Address Hostname Path 3 - owncloudJail /mnt/firstHd/pluginJail/owncloudJail Entering the jail.... [root@freenas] /# jexec 3 /bin/tcsh owncloudJail#
Now i want to see if network is working correcty, let's do some tests:
a) ping FREENAS (192.168.3.25) -> JAIL (192.168.3.30) (SUCCESS)
Code:
[root@freenas] /# ping 192.168.3.30 PING 192.168.3.30 (192.168.3.30): 56 data bytes --- 192.168.3.30 ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss
b) ping JAIL (192.168.3.30) -> FREENAS (192.168.3.25) (SUCCESS)
Code:
owncloudJail# ping 192.168.3.25 --- 192.168.3.25 ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss
c) ping GW (192.168.3.1) -> JAIL (192.168.3.30) (FAILED)
Code:
root@gw:~# ping 192.168.3.30 PING 192.168.3.30 (192.168.3.30) 56(84) bytes of data. From 192.168.3.1 icmp_seq=1 Destination Host Unreachable From 192.168.3.1 icmp_seq=2 Destination Host Unreachable From 192.168.3.1 icmp_seq=3 Destination Host Unreachable --- 192.168.3.30 ping statistics --- 5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4036ms
d) ping JAIL (192.168.3.30) -> GW (192.168.3.1) (FAILED)
Code:
owncloudJail# ping 192.168.3.1 PING 192.168.3.1 (192.168.3.1): 56 data bytes --- 192.168.3.1 ping statistics --- 7 packets transmitted, 0 packets received, 100.0% packet loss
e) ping JAIL (192.168.3.30) -> WEB (8.8.8.8) (FAILED)
Code:
owncloudJail# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes --- 8.8.8.8 ping statistics --- 6 packets transmitted, 0 packets received, 100.0% packet loss
That's my problem!
I give you other infos: jail "ifconfig -a"
Code:
owncloudJail# ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:c7:78:00:0d:0b inet 192.168.3.30 netmask 0xffffff00 broadcast 192.168.3.255 inet6 fe80::c7:78ff:fe00:d0b%epair0b prefixlen 64 scopeid 0x2 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active
and the FREENAS "ifconfig -a"
Code:
[root@freenas] /# ifconfig -a re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> ether 00:1f:c6:05:7d:9c inet 192.168.3.25 netmask 0xffffff00 broadcast 192.168.3.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 02:d6:d8:7a:7d:00 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 4 priority 128 path cost 200000 member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 12 priority 128 path cost 2000 epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:c7:78:00:0c:0a media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active
I hope you have all the informations needed to solve this problem,
Thank you in advance!
Lorenzo