atomicmoose
Cadet
- Joined
- Dec 28, 2012
- Messages
- 5
Good afternoon,
I recently upgraded from FreeNAS 8.0.3 to FreeNAS-8.3.0-RELEASE-p1-x64 (r12825).
The upgrade itself went fine and I'm learning about the new plugins section.
Here is the issue I am having... I've installed the Jail plugins per the instructions found on the Wiki, and that works fine. However, when I installed SABnzbd and other plugins, they cannot access the outside world. SAB cannot contact my news provider and apps like Maraschino cannot contact their update sites.
I started digging around and did much searching here, and I find that I can connect to the jail fine externally and the jail has no issues seeing the local freeNAS install or even my default gateway, but anything beyond that is no bueno.
Here is an example:
Ping from the FreeNAS box
Ping from the same IP, within the Jail
I've seen others ask for the following information when troubleshooting, so I'll add it here to save us all some time. :)
I'm stumped and could really use your help. Thank you in advance!
Moose
I recently upgraded from FreeNAS 8.0.3 to FreeNAS-8.3.0-RELEASE-p1-x64 (r12825).
The upgrade itself went fine and I'm learning about the new plugins section.
Here is the issue I am having... I've installed the Jail plugins per the instructions found on the Wiki, and that works fine. However, when I installed SABnzbd and other plugins, they cannot access the outside world. SAB cannot contact my news provider and apps like Maraschino cannot contact their update sites.
I started digging around and did much searching here, and I find that I can connect to the jail fine externally and the jail has no issues seeing the local freeNAS install or even my default gateway, but anything beyond that is no bueno.
Here is an example:
Ping from the FreeNAS box
Code:
[root@MooseNAS] ~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: icmp_seq=0 ttl=53 time=16.280 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=53 time=14.607 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=53 time=15.797 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=53 time=16.058 ms
Ping from the same IP, within the Jail
Code:
[root@MooseNAS] ~# jexec 1 ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ^C --- 8.8.8.8 ping statistics --- 9 packets transmitted, 0 packets received, 100.0% packet loss
I've seen others ask for the following information when troubleshooting, so I'll add it here to save us all some time. :)
Code:
[root@MooseNAS] ~# ifconfig -a bce0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC> metric 0 mtu 1500 options=c00b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE> ether 00:21:5a:4c:94:9e inet 192.168.1.33 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (1000baseT <full-duplex,flowcontrol,rxpause,txpause>) status: active lo0: flags=28149<UP,LOOPBACK,RUNNING,PROMISC,MULTICAST,PPROMISC> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> bridge0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC> metric 0 mtu 1500 ether 02:16:c3:fe:eb:00 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: bce0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 20000 member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 10 priority 128 path cost 2000 epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:4b:1b:00:0a:0a media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active
Code:
[root@MooseNAS] ~# netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.23 UGS 0 265 bce0 127.0.0.1 link#8 UH 0 46303 lo0 192.168.1.0/24 link#1 U 0 94679 bce0 192.168.1.33 link#1 UHS 0 22 lo0 Internet6: Destination Gateway Flags Netif Expire ::/96 ::1 UGRS lo0 ::1 link#8 UH lo0 ::ffff:0.0.0.0/96 ::1 UGRS lo0 fe80::%lo0/64 link#8 U lo0 fe80::1%lo0 link#8 UHS lo0 ff01::%lo0/32 fe80::1%lo0 U lo0 ff02::%lo0/32 fe80::1%lo0 U lo0 [root@MooseNAS] ~#
Code:
[root@MooseNAS] ~# jexec 1 ifconfig -a lo0: flags=28149<UP,LOOPBACK,RUNNING,PROMISC,MULTICAST,PPROMISC> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> epair0b: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:4b:1b:00:0b:0b inet 192.168.1.32 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::4b:1bff:fe00:b0b%epair0b prefixlen 64 scopeid 0x2 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>) status: active [root@MooseNAS] ~#
I'm stumped and could really use your help. Thank you in advance!
Moose