Skyfox
Explorer
- Joined
- Jul 15, 2013
- Messages
- 50
Hi,
I just had a mail from my FreeNAS setup informing me of the following.
The following warning/error was logged by the smartd daemon:
Device: /dev/ada2, Self-Test Log error count increased from 0 to 1
I took a look at the SMART data using the 'smartctl' utility and I just need a little help interpreting the results. To me it looks like there has been one read error and there is no need to get worried just yet. Although there are a few sections that say 'pre-fail'. Again, looking this up seems to suggest this isn't anything to worry about (also ada1 has the same pre-fail message and that hasn't reported any errors).
But any advice as to if this all looks ok would be greatly appreciated. smartctrl text attached.
Cheers!
I just had a mail from my FreeNAS setup informing me of the following.
The following warning/error was logged by the smartd daemon:
Device: /dev/ada2, Self-Test Log error count increased from 0 to 1
I took a look at the SMART data using the 'smartctl' utility and I just need a little help interpreting the results. To me it looks like there has been one read error and there is no need to get worried just yet. Although there are a few sections that say 'pre-fail'. Again, looking this up seems to suggest this isn't anything to worry about (also ada1 has the same pre-fail message and that hasn't reported any errors).
But any advice as to if this all looks ok would be greatly appreciated. smartctrl text attached.
Cheers!