I have a testbench freenas server that I wanted to test upgrading from the onboard SATA controller (Intel 3400 series) to the LSI 9211-8i on 2x2TB disks (striped vdevs; I should hope RAID level is irrelevant in determining compatibility).
I created a new pool/dataset and threw some data onto them before installing the LSI card. I powered off the machine, put the disks on the LSI card and booted it back up. The pool comes up, and I see the data in the dataset (via SMB share), however I get a red alert from freenas that the "volume is ONLINE: One or more devices has experienced an unrecoverable error", similar to this post: https://forums.freenas.org/index.ph...has-experienced-an-unrecoverable-error.20939/ however my drives show up just fine in SMART tests.
Some of the data on the dataset seemed to come up corrupted, as in, SMB copies would fail or streaming a video file would halt at certain points. This did however not happen to all of the data. Switching back to the onboard SATA controller resolves this issue.
Is this expected behavior? What should one expect when moving disks to new hardware? What can I do to properly migrate the disks without error?
I created a new pool/dataset and threw some data onto them before installing the LSI card. I powered off the machine, put the disks on the LSI card and booted it back up. The pool comes up, and I see the data in the dataset (via SMB share), however I get a red alert from freenas that the "volume is ONLINE: One or more devices has experienced an unrecoverable error", similar to this post: https://forums.freenas.org/index.ph...has-experienced-an-unrecoverable-error.20939/ however my drives show up just fine in SMART tests.
Some of the data on the dataset seemed to come up corrupted, as in, SMB copies would fail or streaming a video file would halt at certain points. This did however not happen to all of the data. Switching back to the onboard SATA controller resolves this issue.
Is this expected behavior? What should one expect when moving disks to new hardware? What can I do to properly migrate the disks without error?