omg... there are no disks in my list. but that is in multipath list.
how to fix that?
I want to mount my 4TB strage, maybe that is ada1.
Code:
[root@freenas ~]# dmesg|grep ad ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 ada0: <WDC WD1600JS-75NCB2 10.02E03> ATA-7 SATA 2.x device ada0: Serial Number WD-WCANM4408937 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 152587MB (312500000 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad10 ada1 at ahcich4 bus 0 scbus4 target 0 lun 0 ada1: <HGST HMS5C4040ALE640 MPAOA580> ATA-8 SATA 3.x device ada1: Serial Number PL1331LAGRNAKH ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad12 GEOM: ada1: the secondary GPT table is corrupt or invalid. GEOM: ada1: using the primary only -- recovery suggested. uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411) GEOM_MULTIPATH: ada1 added to disk1 GEOM_MULTIPATH: ada1 is now active path in disk1
Code:
[root@freenas ~]# mount /dev/ufs/FreeNASs1a on / (ufs, local, read-only) devfs on /dev (devfs, local, multilabel) /dev/md0 on /etc (ufs, local) /dev/md1 on /mnt (ufs, local) /dev/md2 on /var (ufs, local) /dev/ufs/FreeNASs4 on /data (ufs, local, noatime, soft-updates)
Code:
[root@freenas ~]# mount /dev/ada1 /mnt mount: /dev/ada1: Operation not permitted [root@freenas ~]# mount /dev/ada1 /mnt/ada1 mount: /mnt/ada1: No such file or directory [root@freenas ~]# mount /dev/ada1 /mnt/ada1/ mount: /mnt/ada1: No such file or directory
not raid, partition:ZFS
plz help me...
Last edited: