coulix
Dabbler
- Joined
- Feb 12, 2018
- Messages
- 14
Well well, here I am, with a freezing box.
Original introduction post showing my config https://forums.freenas.org/index.ph...for-my-first-freenas-setup.61621/#post-438667
FreeNAS 11, latest updates.
No /var/log/messages showing anything about the crash, but after a continuous NAS to NAS transfer @300 mbits/s reported on the network link for a few hours the machine eventually freezes (no connection, no keyboard input on the screen). Temps are normal.
It also brings the whole network down :/
I bought an Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01) card on purpose so right now I am trying on the motherboard 1Gb network Intel Corporation I211 Gigabit Network Connection card, to see if that makes any difference.
Any hints?
Original introduction post showing my config https://forums.freenas.org/index.ph...for-my-first-freenas-setup.61621/#post-438667
Code:
- AM4 motherboard - GA-AX370-Gaming K7 - Ryzen 1700x - 32 GB of ram (EEC) - 6 x 10TB, 1 SSD - 10 Gbe network card X540-AT2 - 750 W corsair
FreeNAS 11, latest updates.
Code:
FreeBSD SUPERNAS.local.chefclub.tools 11.1-STABLE FreeBSD 11.1-STABLE #0 r321665+de6be8c8d30(freenas/11.1-stable)
No /var/log/messages showing anything about the crash, but after a continuous NAS to NAS transfer @300 mbits/s reported on the network link for a few hours the machine eventually freezes (no connection, no keyboard input on the screen). Temps are normal.
It also brings the whole network down :/
I bought an Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01) card on purpose so right now I am trying on the motherboard 1Gb network Intel Corporation I211 Gigabit Network Connection card, to see if that makes any difference.
Any hints?
Last edited by a moderator: