Hi all.
Long time lurker first-time poster...
Got a weird problem in that one of the built-in 10Gb-t networks on my asrock D1541D4U will only ever connect at 100Mb.
Connected to an Unifi US-16-XG.
It's always ix0. I've swapped the cable from ix0 to ix1 and via versa and sill only 100mb in ix0.
ix1 is happy with all cables at 10Gb.
Tried different ports in the switch. Even tried an old Mikrotik-10G switch we have.
Tried forcing ix0 to 10Gb-t via
But still the same..
Is there something I could be missing?
Thanks for reading
Rob
Long time lurker first-time poster...
Got a weird problem in that one of the built-in 10Gb-t networks on my asrock D1541D4U will only ever connect at 100Mb.
Code:
ix0@pci0:8:0:0: class=0x020000 card=0x15281849 chip=0x15288086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet Controller 10-Gigabit X540-AT2' class = network subclass = ethernet ix1@pci0:8:0:1: class=0x020000 card=0x15281849 chip=0x15288086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet Controller 10-Gigabit X540-AT2' class = network subclass = ethernet
Connected to an Unifi US-16-XG.
Code:
root@truenas[~]# ifconfig ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether d0:50:99:c2:06:4f inet 10.0.50.10 netmask 0xffffff00 broadcast 10.0.50.255 media: Ethernet 10Gbase-T (100baseTX <full-duplex>) status: active nd6 options=9<PERFORMNUD,IFDISABLED> ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 description: ix1 options=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether d0:50:99:c2:06:50 inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 inet 192.168.1.249 netmask 0xffffff00 broadcast 192.168.1.255 inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet autoselect (10Gbase-T <full-duplex>) status: active nd6 options=9<PERFORMNUD,IFDISABLED>
It's always ix0. I've swapped the cable from ix0 to ix1 and via versa and sill only 100mb in ix0.
ix1 is happy with all cables at 10Gb.
Tried different ports in the switch. Even tried an old Mikrotik-10G switch we have.
Tried forcing ix0 to 10Gb-t via
Code:
root@truenas[~]# ifconfig ix0 media 10Gbase-T root@truenas[~]# root@truenas[~]# ifconfig ix0 ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether d0:50:99:c2:06:4f inet 10.0.50.10 netmask 0xffffff00 broadcast 10.0.50.255 media: Ethernet 10Gbase-T (100baseTX <full-duplex>) status: active nd6 options=9<PERFORMNUD,IFDISABLED> root@truenas[~]#
But still the same..
Is there something I could be missing?
Thanks for reading
Rob