Kakistos153
Cadet
- Joined
- Feb 4, 2016
- Messages
- 5
Long time lurker, first time poster. My FreeNAS is as follows.
Z75 pro3 motherboard
Thermaltake 450w power supply
2610sa cerc 1.5
2500k cpu
Usb boot drive
6 drives
So I rebuilt my FreeNAS with that motherboard because I wanted to add a second 2610. My previous board didn't have two slots. It all worked fine with 1 card in the previous motherboard but now the following happens.
The cerc card loads at bios, can boot to the controller. When FreeNAS loads, in the web ui, it doesn't see anything no matter how I configure the drives (individual volumes or in a raid).
Z75 pro3 motherboard
Thermaltake 450w power supply
2610sa cerc 1.5
2500k cpu
Usb boot drive
6 drives
So I rebuilt my FreeNAS with that motherboard because I wanted to add a second 2610. My previous board didn't have two slots. It all worked fine with 1 card in the previous motherboard but now the following happens.
The cerc card loads at bios, can boot to the controller. When FreeNAS loads, in the web ui, it doesn't see anything no matter how I configure the drives (individual volumes or in a raid).