freenas hp proliant n36l

[renzo sartori]

I have a FreeNAS microserver with 4 x 2TB hdd.
When it boot, the process aborts.
......
Starting GEOM devices.
GEOM_RAID5: registered shutdown event handler.
GEOM_RAID5: MIRROR device created (stripesize=131072).
GEOM_RAID5: MIRROR: AD10(3): DISK ATTACHED.
GEOM_RAID5: MIRROR: AD8(2): DISK ATTACHED.
GEOM_RAID5: MIRROR: AD6(1): DISK ATTACHED.
GEOM_RAID5: MIRROR: AD4(0): DISK ATTACHED.
GEOM_RAID5: MIRROR: activated.
Entropy harvesting: interruts ethernet point_to_point kickstart.
Starting file system checks:
/dev/raid5/MIRRORp1: 53967087272 BAD I=382979073
/dev/raid5/MIRRORp1: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY.
Automatic file system check failed; help!
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
Dec 2 18:02:00 init;: /bin/sh on /etc/rc terminated abnormally, going to single user mode
Enter full pathname or shell or RETURN for /bin/sh:


I don't want to lose my data. What should I do?
Thank in advance

 

[dlavigne]

Ouch, an older version of FreeNAS on a UFS RAID...

Press enter in single-user mode to enter a shell and type fsck -y. If you get prompted to accept something as the system fsck's, do it. Does that make the system happy again?

 

[renzo sartori]

Thanks a lot. Tomorrow i will try!