I'm not sure what I'm doing wrong here....
The host gets an autoconf address fine. I'm able to get to the GUI via the IP6 address.
The jails don't get an autoconf address from the dhcp6 server.
If I set it manually in the jail settings, ifconfig shows the address but trying to ping my router, I get
ifconfig on the statically assigned jail... I don't see that fe80:::: /56 address like I see in the host and the autoconf jails.
ifconfig epair6a and ethernet em1 on the host
The host gets an autoconf address fine. I'm able to get to the GUI via the IP6 address.
The jails don't get an autoconf address from the dhcp6 server.
If I set it manually in the jail settings, ifconfig shows the address but trying to ping my router, I get
# ping6 2607:f2c0:f00f:e600::1
ping6: UDP connect: Can't assign requested address
ifconfig on the statically assigned jail... I don't see that fe80:::: /56 address like I see in the host and the autoconf jails.
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
epair6b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 82:9f:a3:79:60:ad
inet 192.168.73.18 netmask 0xffffff00 broadcast 192.168.73.255
inet6 2607:f2c0:f00f:e600:1::2 prefixlen 56 tentative
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
ifconfig epair6a and ethernet em1 on the host
root@storage:~ # ifconfig epair6a
epair6a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:ff:e0:00:0b:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
root@storage:~ # ifconfig em1
em1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=42098<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWTSO>
ether 00:25:90:db:42:b2
inet 192.168.73.15 netmask 0xffffff00 broadcast 192.168.73.255
inet6 fe80::225:90ff:fedb:42b2%em1 prefixlen 64 scopeid 0x2
inet6 2607:f2c0:f00f:e600:2::1241 prefixlen 56
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active