@jenksdrummer Do you have any SSDs attached to the 3008 controller?
root@truenas[~]# sas3flash -list
Avago Technologies SAS3 Flash Utility
Version 16.00.00.00 (2017.05.02)
Copyright 2008-2017 Avago Technologies. All rights reserved.
Adapter Selected is a Avago SAS: SAS3008(C0)
Controller Number : 0
Controller : SAS3008(C0)
PCI Address : 00:00:10:00
SAS Address : 500605b-0-0915-a7d2
NVDATA Version (Default) : 0e.01.00.07
NVDATA Version (Persistent) : 0e.01.00.07
Firmware Product ID : 0x2221 (IT)
Firmware Version : 16.00.01.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9300-8i
BIOS Version : 08.37.00.00
UEFI BSD Version : 18.00.00.00
FCODE Version : N/A
Board Name : SAS9300-8i
Board Assembly : H3-25461-02H
Board Tracer Number : XW64122ED2
Finished Processing Commands Successfully.
Exiting SAS3Flash.
I see you have old firmware on the HBASorry to move this thread back up! But Im getting crashes with no logs or kernel messages and Im not sure how to debug/RTFM...
The total crash happen when there is pool activity so I suspect the HBA.
I have 6 SSD 870QVO on the 9300-8i.
Running the latest CORE:
FreeBSD truenas.test.lan 13.1-RELEASE FreeBSD 13.1-RELEASE n245376-eba770b30ff TRUENAS amd64
Im I seeing the same bug?
root@truenas[~]# sas3flash -list Avago Technologies SAS3 Flash Utility Version 16.00.00.00 (2017.05.02) Copyright 2008-2017 Avago Technologies. All rights reserved. Adapter Selected is a Avago SAS: SAS3008(C0) Controller Number : 0 Controller : SAS3008(C0) PCI Address : 00:00:10:00 SAS Address : 500605b-0-0915-a7d2 NVDATA Version (Default) : 0e.01.00.07 NVDATA Version (Persistent) : 0e.01.00.07 Firmware Product ID : 0x2221 (IT) Firmware Version : 16.00.01.00 NVDATA Vendor : LSI NVDATA Product ID : SAS9300-8i BIOS Version : 08.37.00.00 UEFI BSD Version : 18.00.00.00 FCODE Version : N/A Board Name : SAS9300-8i Board Assembly : H3-25461-02H Board Tracer Number : XW64122ED2 Finished Processing Commands Successfully. Exiting SAS3Flash.
thanks! just to report back. I updated the firmware and I think my issues where related to other hardware components, not the 9300.I see you have old firmware on the HBA
Good place to start would be update to the 16.00.12.00 from here https://www.truenas.com/community/resources/lsi-9300-xx-firmware-update.145/