Help with LSI 9300

[riotbob]

Hi All,

I am using TrueNAS-13.0-U5.3. I am trying to expand my storage, so I bought an LSI Broadcom SAS 9300-8i 8-port 12Gb/s SATA+SAS PCI-Express 3.0 HBA.
I assume my TrueNAS sees it, since I enter sas3flash -list this is what I get:

root@truenas[~]# sas3flash -list
Avago Technologies SAS3 Flash Utility
Version 16.00.00.00 (2017.05.02)
Copyright 2008-2017 Avago Technologies. All rights reserved.

Adapter Selected is a Avago SAS: SAS3008(C0)

Controller Number : 0
Controller : SAS3008(C0)
PCI Address : 00:01:00:00
SAS Address : 500605b-0-0b73-d710
NVDATA Version (Default) : 0e.01.00.07
NVDATA Version (Persistent) : 0e.01.00.07
Firmware Product ID : 0x2221 (IT)
Firmware Version : 16.00.10.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9300-8i
BIOS Version : 08.37.00.00
UEFI BSD Version : 18.00.00.00
FCODE Version : N/A
Board Name : SAS9300-8i
Board Assembly

I have some Seagate Nytro 3332 SSD I want to use but when I connect it to the HBA via a SFF-8643, it doesn't show up in my Disks Section.
What am I doing wrong? Thank you!!!

-RB