FreeNAS 11.1 - Very Slow, Resilvering extreme slow etc.

[rs225]

I'd say it is definitely a bug somewhere. There has already been a kernel memory leak bug found and fixed; but it may be something else entirely. I suspect an update is going to roll out soon.

 

[Ericloewe]

Yes, it is free space fragmentation, but that's no excuse for the system to lock up.

You might want to review your storage setup, but that's a different story.

 

[Palmore]

Yes, it is free space fragmentation, but that's no excuse for the system to lock up.

You might want to review your storage setup, but that's a different story.

Uh oh, lol. Mind sharing what I am doing wrong? just a quick side bar, not to deviate from the main topic to much. But if you see something wrong, I'll be sure to fix it, Plex and Emby sit on those 2 mirrored SSDs, and they are pretty active IO wise as they manager a decent sized library, and they have been running for 2 years on the same mirror pool.



SuperMicro SC826E16-R1200LPB Chassis 2U | 12 Bay
SuperMicro X8DTN+ | 2x Intel Xeon Six Core E5645 @ 2.4Ghz | 48GB DDR3 ECC

BPN-SAS2-826EL1 826 backplane with single LSI SAS2X28 expander chip
Dual 1200watt PSU

LSI 9240-8i Controller


FreeNas Boot
2x SanDisk 16GB Cruzer Blade SDCZ50

RAIDZ2
6x Seagate Enterprise 5TB 7200RPM SATA III ST5000NM0084

RAIDZ1
4x Seagate SV35 Series 3TB 7200RPM SATA III ST3000VX000

Jail Mirror
SanDisk 128GB SSD SATA III Z400s (soon to be replaced with another evo850)
Samsung EVO 850 250GB SSD SATA III (brand new drive that just resilvered, replaced the other SanDisk 128)

 

[Ericloewe]

Mind sharing what I am doing wrong?

Well, some of those pools are awfully full.

 

[Ericloewe]

Eric - are you truly still running FreeNAS 9.10, or have you just not updated your signature lately?

Yes, I am. Didn't have the chance to update to 11.0 and it'll be a while before I update to 11.1.

 

[rs225]

Don't pay any mind to the free space fragmentation percentage. It should be either made useful or removed.