FirstTimer
Cadet
- Joined
- Jul 19, 2013
- Messages
- 5
I started with FreeNas8, which seems to boot fine on my machine, but the built-in ethernet adapter is not recognized.
Details:
ASRock Z87E-ITX Motherboard
Giga PHY Intel I217V
In dmesg, it only says:
pci0: <network, ethernet> at device 25.0 (no driver attached).
I tried enabling the 'em' and 'igb' driver as described in the FreeBSD manual, but adding to loader.conf didn't work. http://www.freebsd.org/cgi/man.cgi?query=em&sektion=4
I found a download of the driver source, but have no idea how to integrate that into an image that I can burn to my bootable thumb drive.... https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17509&keyword=freebsd&lang=eng
In FreeNas9, the install craps out much earlier (and I don't have that error message handy).
I'm hoping someone else has solved this and can pass along some pointers to this noob.
Details:
ASRock Z87E-ITX Motherboard
Giga PHY Intel I217V
In dmesg, it only says:
pci0: <network, ethernet> at device 25.0 (no driver attached).
I tried enabling the 'em' and 'igb' driver as described in the FreeBSD manual, but adding to loader.conf didn't work. http://www.freebsd.org/cgi/man.cgi?query=em&sektion=4
I found a download of the driver source, but have no idea how to integrate that into an image that I can burn to my bootable thumb drive.... https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17509&keyword=freebsd&lang=eng
In FreeNas9, the install craps out much earlier (and I don't have that error message handy).
I'm hoping someone else has solved this and can pass along some pointers to this noob.