Hi all,
I'm desperate for a bit of help here. I've had my FreeNas box working for over a year now, yet today I was happily using it in Windows 10 and noticed it was slowing moving a file, it then when I tried to save anything it wouldn't work and had lost the network connection.
I rebooted server using the off/on button on the front of the machine and when it started I got the following message back:
Trying to mount root from zfs:freenas-boot/root/freenas-9.3-stable-201512121950[]...
Loading early kernel modules:
GEOM_RAID5: Module loaded, version 1.3.20140711.2 (rev f91e28e40bf7)
(da0:umass-sim0:0:0:0:0): READ(10). CDB: 28 00 00 00 24 ee 00 00 01 00
(da0:umass-sim0:0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(da0:umass-sim0:0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0:0): READ(10). CDB: 28 00 00 00 24 ee 00 00 02 00
(da0:umass-sim0:0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(da0:umass-sim0:0:0:0:0): Error 5, Unretryable error
Now I'll hold my hands up now I don't know much about this stuff, I managed to get the whole thing working as I wanted using the GUI and a few instructions. But past that I struggle with even using the command line.
I've read a few bits here so far, which have confused me more, and at the moment I think my USB stick that I use to boot up has died and I need to get a new one, install FreeNAS again and then get the config from my old USB stick and I should be fine?
I'm really really worried I may lose my data (which I can't afford to do) so I've currently unplugged the 4 drives on the off chance me trying anything will make it worse.
Can any body shed any light on to what I've done and what I should do to fix it please. Is my plan of getting a new install on a new usb stick sensible? How can I get my old config file from the USB stick?
Please help I'm in so much trouble here.
I've got an HP ProLiant Gen8 G1610T 2GB RAM MicroServer.
I'm desperate for a bit of help here. I've had my FreeNas box working for over a year now, yet today I was happily using it in Windows 10 and noticed it was slowing moving a file, it then when I tried to save anything it wouldn't work and had lost the network connection.
I rebooted server using the off/on button on the front of the machine and when it started I got the following message back:
Trying to mount root from zfs:freenas-boot/root/freenas-9.3-stable-201512121950[]...
Loading early kernel modules:
GEOM_RAID5: Module loaded, version 1.3.20140711.2 (rev f91e28e40bf7)
(da0:umass-sim0:0:0:0:0): READ(10). CDB: 28 00 00 00 24 ee 00 00 01 00
(da0:umass-sim0:0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(da0:umass-sim0:0:0:0:0): Error 5, Unretryable error
(da0:umass-sim0:0:0:0:0): READ(10). CDB: 28 00 00 00 24 ee 00 00 02 00
(da0:umass-sim0:0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(da0:umass-sim0:0:0:0:0): Error 5, Unretryable error
Now I'll hold my hands up now I don't know much about this stuff, I managed to get the whole thing working as I wanted using the GUI and a few instructions. But past that I struggle with even using the command line.
I've read a few bits here so far, which have confused me more, and at the moment I think my USB stick that I use to boot up has died and I need to get a new one, install FreeNAS again and then get the config from my old USB stick and I should be fine?
I'm really really worried I may lose my data (which I can't afford to do) so I've currently unplugged the 4 drives on the off chance me trying anything will make it worse.
Can any body shed any light on to what I've done and what I should do to fix it please. Is my plan of getting a new install on a new usb stick sensible? How can I get my old config file from the USB stick?
Please help I'm in so much trouble here.
I've got an HP ProLiant Gen8 G1610T 2GB RAM MicroServer.