Drive pool unavailable

[Bert Havekes]

Hello,

I am looking for help with a problem I have.
Both my boot-drive and storage-drive were disconnected from the system while running.

After I plugged the drives back in, and turned the system back on, I got the following error:
"error getting available space" next to my drive pool, at the storage section in Freenas GUI.

I am using a 2tb HDD for my storage in stripe;
and another drive as bootdrive.
I am able to normally boot the system and log in at the web GUI, but I can't access my data, plugins, snapshots etc. from my 2tb drive.

Any help or suggestions regarding my problem are welcome:).

Thanks in advance,
Bert

 

[m0nkey_]

I am using a 2tb HDD for my storage in stripe;

This is a very bad configuration.

Can you post the output of zpool status using the code tags.

 

[DrKK]

I am using a 2tb HDD for my storage in stripe;
and another drive as bootdrive.
I am able to normally boot the system and log in at the web GUI, but I can't access my data, plugins, snapshots etc. from my 2tb drive.

May God help us.

 

[Bert Havekes]

This is a very bad configuration.

Yes, I am aware of that, I am planning to add another 2tb drive to the system.

Can you post the output of zpool status using the code tags.

Code:

[root@freenas ~]# zpool status																									 
  pool: freenas-boot																												
state: ONLINE																													 
  scan: scrub repaired 0 in 0h1m with 0 errors on Sat Jan 14 03:46:02 2017														 
config:																															 
																																	
		NAME		STATE	 READ WRITE CKSUM																					 
		freenas-boot  ONLINE	   0	 0	 0																					
		  ada0p2	ONLINE	   0	 0	 0																					 
																																	
errors: No known data errors																										
[root@freenas ~]#																												   
					   

 

[m0nkey_]

Your pool is missing. Can you post the output of camcontrol devlist.