Hello i'm new to freenas and have problems to understand network configuration of of jails.
what it looks like now:
# ifconfig
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether xx:xx:xx:xx:xx:xx
hwaddr xx:xx:xx:xx:xx:xx
inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether xx:xx:xx:xx:xx:xx
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: vnet0:2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 2000
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
vnet0:2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: transmission as nic: epair0b
options=8<VLAN_MTU>
ether xx:xx:xx:xx:xx:xx
hwaddr xx:xx:xx:xx:xx:xx
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
in transmission jail, IPv4 Interface: vnet0, IPv4 Address: 192.168.0.60, IPv4 Netmask: 24, Default Router: 192.168.0.1,
in network properties i have vnet0:bridge0
what inteface should i use of re0 vnet0 bridge0 if i want to install sonarr i've searched and tried everything but no go (a bit thick i guess :) )
I've somehow managed to get transmission up and running, but there is no ip address visible, i can connect with transmission-remote-gtk and there are seeds
but connections to peers seems a little wonky.
Appreciate any help.
what it looks like now:
# ifconfig
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether xx:xx:xx:xx:xx:xx
hwaddr xx:xx:xx:xx:xx:xx
inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether xx:xx:xx:xx:xx:xx
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: vnet0:2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 2000
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
vnet0:2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: transmission as nic: epair0b
options=8<VLAN_MTU>
ether xx:xx:xx:xx:xx:xx
hwaddr xx:xx:xx:xx:xx:xx
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
in transmission jail, IPv4 Interface: vnet0, IPv4 Address: 192.168.0.60, IPv4 Netmask: 24, Default Router: 192.168.0.1,
in network properties i have vnet0:bridge0
what inteface should i use of re0 vnet0 bridge0 if i want to install sonarr i've searched and tried everything but no go (a bit thick i guess :) )
I've somehow managed to get transmission up and running, but there is no ip address visible, i can connect with transmission-remote-gtk and there are seeds
but connections to peers seems a little wonky.
Appreciate any help.