In GUI -> Storage -> Disks for disk da2 serial number is 000000004A16
When I check da2 serial number by code
Answer is:
ZDH2STM8 is the correct serial number for my da2 disk.
I have problem, because my NAS find two disks connected by ICY BOX IB-377U3 with the same serial number 000000004A16. This serial number is not my hard drive serial number. It is constant and does not change when the hard drive insiade ICY BOX IB-377U3 is replaced.
My goal is to connect two drives to the NAS by ICY BOX IB-377U3. Now that's not possible because the NAS finds it as multipath.
Why does the NAS find the wrong serial number?
Thanks for help in advance.
My NAS is: TrueNAS-12.0-STABLE
Information about disk
When I check da2 serial number by code
smartctl -a /dev/da2 | grep Serial
Answer is:
Code:
Serial Number: ZDH2STM8
ZDH2STM8 is the correct serial number for my da2 disk.
I have problem, because my NAS find two disks connected by ICY BOX IB-377U3 with the same serial number 000000004A16. This serial number is not my hard drive serial number. It is constant and does not change when the hard drive insiade ICY BOX IB-377U3 is replaced.
My goal is to connect two drives to the NAS by ICY BOX IB-377U3. Now that's not possible because the NAS finds it as multipath.
Why does the NAS find the wrong serial number?
Thanks for help in advance.
My NAS is: TrueNAS-12.0-STABLE
Information about disk
smartctl -a /dev/da2
Code:
=== START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST4000VN008-2DR166 Serial Number: ZDH2STM8 LU WWN Device Id: 5 000c50 0a5dbccf8 Firmware Version: SC60 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision