I recently replaced a disk in my pool after I received the following alerts:
After replacing I run Sparefoots burnin script to validate wether the old disk is really failing or not.
Bad blocks returned no errors and the short & long S.M.A.R.T tests all pass without error - which installs confidence in me that the disk is actually fine.
I have attached the results and would appreciate some help deciding if the disk would be fit for service again or not please.
Info:
Thank you in advanced.
Code:
* Device: /dev/ada3, Self-Test Log error count increased from 0 to 1. * Device: /dev/ada3, 8 Currently unreadable (pending) sectors.
After replacing I run Sparefoots burnin script to validate wether the old disk is really failing or not.
Bad blocks returned no errors and the short & long S.M.A.R.T tests all pass without error - which installs confidence in me that the disk is actually fine.
I have attached the results and would appreciate some help deciding if the disk would be fit for service again or not please.
Info:
- Disk is a WD100EMAZ shucked from a My Book (10TB)
- My disks are hotter than I would like them to be
- I didn't burnin the disk prior to use (I was too lazy at the time - bad boy)
- The device identifier ada3 & da9 was the same disk just using different HBAs
- There are a few short tests run in a row as the server shutdown while running long test due to power loss to the UPS
- Happy to provide hardware info if need be
Thank you in advanced.