Adith Sudhakar
Cadet
- Joined
- May 6, 2015
- Messages
- 9
I have 2 WD Red Drives 3 TB in mirror configuration and the volume is reported as being healthy.
However, I see a lot of
and SMART results show:
which clearly shows my drive is failing.
If that is the case, why am I not seeing that the drive has failed in the GUI ?
However, I see a lot of
Code:
ahcich1: Error while READ LOG EXT (ada0:ahcich1:0:0:0): READ_FPDMA_QUEUED. ACB: 60 d0 10 8d 32 40 46 00 00 00 00 00 (ada0:ahcich1:0:0:0): CAM status: ATA Status Error (ada0:ahcich1:0:0:0): ATA status: 00 () (ada0:ahcich1:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 (ada0:ahcich1:0:0:0): Error 5, Retries exhausted
and SMART results show:
Code:
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N4HUCVPV LU WWN Device Id: 5 0014ee 20bbb9649 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jun 6 11:21:47 2015 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 73) The previous self-test completed having a test element that failed and the test element that failed is not known. Total time to complete Offline data collection: (41160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 413) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 114 114 051 Pre-fail Always - 2260 3 Spin_Up_Time 0x0027 181 180 021 Pre-fail Always - 5908 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 28 5 Reallocated_Sector_Ct 0x0033 138 138 140 Pre-fail Always FAILING_NOW 1823 7 Seek_Error_Rate 0x002e 189 189 000 Old_age Always - 637 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 806 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 18 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 20 194 Temperature_Celsius 0x0022 122 119 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 164 164 000 Old_age Always - 36 197 Current_Pending_Sector 0x0032 066 066 000 Old_age Always - 65532 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: unknown failure 90% 806 - # 2 Short offline Completed: unknown failure 90% 806 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
which clearly shows my drive is failing.
If that is the case, why am I not seeing that the drive has failed in the GUI ?