VictorR
Contributor
- Joined
- Dec 9, 2015
- Messages
- 143
We have a new 30-drive NAS running 9.3.1 with 3x dual 10GbE NIC cards that will be used as shared storage for our film post-production/editing room. The on-motherboard 1GbE port is receiving a 192.168.0.x address from an Apple Airport Extreme router(for internet access). Via the web GUI, I have the 30 x 4TB drives in RAID Z2. And have created a temporary AFP share for doing some bandwidth testing.
I configured the one of interfaces (ix0) as 10.0.0.1/24.
For testing purposes, right now, I manually configured my Macbook Pro's 1GbE NIC to 10.0.0.7/24. I was unsure what to put in the router field as there is none. Aiming my browser at 10.0.0.9, I get the Freenas GUI
Running Black Magic's Disk Speed Test, I am getting 110MB/sec read & write. All good.
But, when I try to add any of the other interfaces as 10.0.0.x /24 (netmask of 255.255.255.0), it says "The network 10.0.0.0/24 is already in use by another NIC"
I don't know why I am getting a brainfart on this, but I am at a loss why it isn't allowed. Ultimately, we would like to LAGG (link aggregate) each of the dual-NICs when this goes live for production.
I configured the one of interfaces (ix0) as 10.0.0.1/24.
For testing purposes, right now, I manually configured my Macbook Pro's 1GbE NIC to 10.0.0.7/24. I was unsure what to put in the router field as there is none. Aiming my browser at 10.0.0.9, I get the Freenas GUI
Running Black Magic's Disk Speed Test, I am getting 110MB/sec read & write. All good.
But, when I try to add any of the other interfaces as 10.0.0.x /24 (netmask of 255.255.255.0), it says "The network 10.0.0.0/24 is already in use by another NIC"
I don't know why I am getting a brainfart on this, but I am at a loss why it isn't allowed. Ultimately, we would like to LAGG (link aggregate) each of the dual-NICs when this goes live for production.
Last edited: