skyline65
Explorer
- Joined
- Jul 18, 2014
- Messages
- 95
I just received an email warning from Freenas during a routine scrub.
The volume Server (ZFS) state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
So I ran zpool status... and all 4 disks seem to have problems!
scan: scrub in progress since Fri Dec 2 04:00:27 2016
4.85T scanned out of 8.78T at 96.8M/s, 11h48m to go
192M repaired, 55.29% done
config:
NAME STATE READ WRITE CKSUM
Server DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 9
gptid/eeb55e39-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 737 too many errors (repairing)
gptid/efaf45f6-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 749 too many errors (repairing)
gptid/f0972a6e-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 735 too many errors (repairing)
gptid/f17e3830-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 851 too many errors (repairing)
errors: No known data errors
Im running a 6 disk RaidZ2 and a 4 disk RaidZ2... WD green disks... which have had WDIDLE used on them.
Supermicro Board X9, 1220, 16GB RAM, Dell Perc H300 flashed.
I’m pretty sure it isnt the card unless 1 of the channels has gone bad, as 2 of the disks from the 6 Disk Raid Z2 are running off it. Im wondering whether the cable has gone bad... or all 4 disks are dying simultaneously.
As the scrub is half way through what should I do? Shutdown and replace cable and start another scrub?
Thanks
I just ran
smartctl -qnoserial -x /dev/
and all the drives passed.
The volume Server (ZFS) state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
So I ran zpool status... and all 4 disks seem to have problems!
scan: scrub in progress since Fri Dec 2 04:00:27 2016
4.85T scanned out of 8.78T at 96.8M/s, 11h48m to go
192M repaired, 55.29% done
config:
NAME STATE READ WRITE CKSUM
Server DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 9
gptid/eeb55e39-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 737 too many errors (repairing)
gptid/efaf45f6-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 749 too many errors (repairing)
gptid/f0972a6e-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 735 too many errors (repairing)
gptid/f17e3830-ad79-11e5-98b5-001b78574ec8 DEGRADED 0 0 851 too many errors (repairing)
errors: No known data errors
Im running a 6 disk RaidZ2 and a 4 disk RaidZ2... WD green disks... which have had WDIDLE used on them.
Supermicro Board X9, 1220, 16GB RAM, Dell Perc H300 flashed.
I’m pretty sure it isnt the card unless 1 of the channels has gone bad, as 2 of the disks from the 6 Disk Raid Z2 are running off it. Im wondering whether the cable has gone bad... or all 4 disks are dying simultaneously.
As the scrub is half way through what should I do? Shutdown and replace cable and start another scrub?
Thanks
I just ran
smartctl -qnoserial -x /dev/
and all the drives passed.
Last edited: