Hello,
Newbie here. please help.
Alert CRITICAL: Device: /dev/ada3, 1 Currently unreadable (pending) sectors
OS: Current Train: FreeNAS-9.3-STABLE (Installed OS)
Zpool status seems okay, here it is:
smartctl -a /dev/ada3
Newbie here. please help.
Alert CRITICAL: Device: /dev/ada3, 1 Currently unreadable (pending) sectors
OS: Current Train: FreeNAS-9.3-STABLE (Installed OS)
Zpool status seems okay, here it is:
Code:
]0;root@freenas:~[[1mroot@freenas[m] [1m~[m# zpp[Kool status pool: OrgVol state: ONLINE scan: scrub repaired 0 in 6h35m with 0 errors on Fri May 15 08:35:34 2015 config: NAME STATE READ WRITE CKSUM OrgVol ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/2ceb1ef3-85ad-11e4-a805-4439c494b325 ONLINE 0 0 0 gptid/2daf6dc8-85ad-11e4-a805-4439c494b325 ONLINE 0 0 0 gptid/2e70ff38-85ad-11e4-a805-4439c494b325 ONLINE 0 0 0 gptid/2f2d8157-85ad-11e4-a805-4439c494b325 ONLINE 0 0 0 gptid/2ff38ed2-85ad-11e4-a805-4439c494b325 ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors
smartctl -a /dev/ada3
Code:
]0;root@freenas:~[[1mroot@freenas[m] [1m~[m# smartc[K[K[K[K[K[Ksmartcl[Ktl -a /dev/ada3 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4NHZDPCJ4 LU WWN Device Id: 5 0014ee 2602a56fd Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 15 14:23:54 2015 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (39900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 400) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 25 3 Spin_Up_Time 0x0027 190 179 021 Pre-fail Always - 5466 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 72 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 3651 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 72 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 60 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 54 194 Temperature_Celsius 0x0022 116 111 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 15 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3471 - # 2 Short offline Completed: read failure 70% 3339 1564476880 # 3 Short offline Completed without error 00% 3339 - # 4 Short offline Completed without error 00% 3338 - # 5 Short offline Completed without error 00% 3337 - # 6 Short offline Completed without error 00% 3336 - # 7 Short offline Completed without error 00% 3335 - # 8 Short offline Completed without error 00% 3334 - # 9 Short offline Completed without error 00% 3333 - #10 Short offline Completed without error 00% 3332 - #11 Short offline Completed without error 00% 3331 - #12 Short offline Completed without error 00% 3330 - #13 Short offline Completed without error 00% 3329 - #14 Short offline Completed: read failure 70% 3327 1564476536 #15 Short offline Completed: read failure 50% 3327 1564552088 #16 Short offline Completed without error 00% 3326 - #17 Short offline Completed: read failure 40% 3325 1564642664 #18 Short offline Completed: read failure 60% 3323 1564478912 #19 Short offline Completed without error 00% 3323 - #20 Short offline Completed without error 00% 3322 - #21 Short offline Completed without error 00% 3321 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.