Hello,
I'm trying to get my new 10Gbit Network working, but while copying something from my NAS (FreeNAS 11) -> PC (Windows 10), it starts with ~400MB/s and gets slower down to ~50 - 80 MB/s in seconds. Its slower than my old gbit connection. The other way (PC > NAS) it works great, with about 450MB/s.
I'm using an ConnectX-2 on both sites with a ~30m Fiber Connection. On my Windows System the latest Driver are installed for the Card. Also, tried to exchange the cards between PC and NAS but, it's exactly the same Problem.
Tried it with "gstat -p" and PC -> NAS, Drives are about ~80-100% usage. NAS -> PC, Drives are about 10% usage.
I really don't know anymore what else I could try. Would be so great if someone could help me here.
Patrick
I'm trying to get my new 10Gbit Network working, but while copying something from my NAS (FreeNAS 11) -> PC (Windows 10), it starts with ~400MB/s and gets slower down to ~50 - 80 MB/s in seconds. Its slower than my old gbit connection. The other way (PC > NAS) it works great, with about 450MB/s.
I'm using an ConnectX-2 on both sites with a ~30m Fiber Connection. On my Windows System the latest Driver are installed for the Card. Also, tried to exchange the cards between PC and NAS but, it's exactly the same Problem.
Tried it with "gstat -p" and PC -> NAS, Drives are about ~80-100% usage. NAS -> PC, Drives are about 10% usage.
I really don't know anymore what else I could try. Would be so great if someone could help me here.
Patrick