hello
I have problem with Chelsio T580-LP-CR and freenas 11.2 BETA3
here is the output cat /var/run/dmesg.boot
I have a limited knowledge of FreeBSD
I have installed on an other system DELL R320 with Chelsio T580-SO-CR and I had to downgrade the LifeCycle Controller ot a v1.1.1.18 and upgrade the BIOS to v2.5.1, but with this adapter this is not working I tried with different versions of Lifecycle controller seems I am getting the same dmesg output
here is the whole dmesg.boot
Thank you
I have problem with Chelsio T580-LP-CR and freenas 11.2 BETA3
here is the output cat /var/run/dmesg.boot
Code:
t5nex0: <Chelsio T580-LP-CR> mem 0xd9d00000-0xd9d7ffff,0xd8000000-0xd8ffffff,0xd9ffa000-0xd9ffbfff irq 48 at device 0.4 numa-domain 0 on pci2 t5nex0: failed to process config file: 5. t5nex0: error during attach, adapter is now in recovery mode.
I have a limited knowledge of FreeBSD
I have installed on an other system DELL R320 with Chelsio T580-SO-CR and I had to downgrade the LifeCycle Controller ot a v1.1.1.18 and upgrade the BIOS to v2.5.1, but with this adapter this is not working I tried with different versions of Lifecycle controller seems I am getting the same dmesg output
here is the whole dmesg.boot
Code:
root@freenas[~]# cat /var/run/dmesg.boot Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-STABLE #0 r325575+dac72894653(freenas/11-stable): Sun Sep 9 19:34:18 EDT 2018 root@nemesis.tn.ixsystems.com:/freenas-11.2-releng/freenas/_BE/objs/freenas-11.2-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz (1800.04-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0xc000000<IBPB,STIBP> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 25769803776 (24576 MB) avail memory = 18626764800 (17763 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic1: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #13 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #14 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #15 Launched! SMP: AP CPU #12 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #5 Launched! Timecounter "TSC" frequency 1800042894 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard padlock0: No ACE support. acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0 ipmi0: KCS mode found at io 0xca8 on acpi cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 cpu12: <ACPI CPU> on acpi0 cpu13: <ACPI CPU> on acpi0 cpu14: <ACPI CPU> on acpi0 cpu15: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 mfi0: <Drake Skinny> port 0xfc00-0xfcff mem 0xdaffc000-0xdaffffff,0xdaf80000-0xdafbffff irq 34 at device 0.0 numa-domain 0 on pci1 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: mfip0: 1069 (592620305s/0x0020/info) - Shutdown command received from host <SCSI Passthrough Bus>mfi0: 1070 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028) mfi0: 1071 (boot + 3s/0x0020/info) - Firmware version 2.121.14-3811 mfi0: 1072 (boot + 5s/0x0020/info) - Package version 20.13.1-0002 mfi0: 1073 (boot + 5s/0x0020/info) - Board Revision A08 mfi0: numa-domain 0 on mfi0 1074 (boot + 31s/0x0002/info) - Unexpected sense: Encl PD 20 Path 554a802048d5a500, CDB: 1c 01 00 00 20 00, Sense: 6/29/00 mfi0: 1075 (boot + 33s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored mfi0: 1076 (boot + 33s/0x0002/info) - Inserted: Encl PD 20 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 t5nex0: <Chelsio T580-LP-CR> mem 0xd9d00000-0xd9d7ffff,0xd8000000-0xd8ffffff,0xd9ffa000-0xd9ffbfff irq 48 at device 0.4 numa-domain 0 on pci2 t5nex0: failed to process config file: 5. t5nex0: error during attach, adapter is now in recovery mode. pci2: <mass storage, SCSI> at device 0.5 (no driver attached) pci2: <serial bus, Fibre Channel> at device 0.6 (no driver attached) pcib3: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 pci3: <PCI bus> numa-domain 0 on pcib3 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdd0fd000-0xdd0fd3ff irq 23 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50a0000-0xd50affff,0xd50b0000-0xd50bffff,0xd50c0000-0xd50cffff irq 16 at device 0.0 numa-domain 0 on pci5 bge0: APE FW version: NCSI v1.2.33.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: f0:1f:af:e0:cf:96 bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd50d0000-0xd50dffff,0xd50e0000-0xd50effff,0xd50f0000-0xd50fffff irq 17 at device 0.1 numa-domain 0 on pci5 bge1: APE FW version: NCSI v1.2.33.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: f0:1f:af:e0:cf:97 pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 pci7: <PCI bus> numa-domain 0 on pcib7 pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7 pci8: <PCI bus> numa-domain 0 on pcib8 pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 pci9: <PCI bus> numa-domain 0 on pcib9 vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdc7fc000-0xdc7fffff,0xdb800000-0xdbffffff irq 19 at device 0.0 numa-domain 0 on pci9 vgapci0: Boot video device pcib10: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci7 pci10: <PCI bus> numa-domain 0 on pcib10 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdd0fe000-0xdd0fe3ff irq 22 at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib11: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci11: <PCI bus> numa-domain 0 on pcib11 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xece8-0xecef,0xecf8-0xecfb,0xecf0-0xecf7,0xecfc-0xecff,0xecc0-0xecdf mem 0xdd0ff000-0xdd0ff7ff irq 20 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci12: <ACPI PCI bus> numa-domain 0 on pcib12 pci12: <dasp, performance counters> at device 14.1 (no driver attached) pci12: <dasp, performance counters> at device 19.1 (no driver attached) pci12: <dasp, performance counters> at device 19.4 (no driver attached) pci12: <dasp, performance counters> at device 19.5 (no driver attached) pcib13: <ACPI Host-PCI bridge> on acpi0 pci13: <ACPI PCI bus> on pcib13 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ichwd0: <Intel Patsburg watchdog timer> on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xd3000-0xd3fff,0xd4000-0xd4fff,0xec000-0xeffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est0 attach returned 6 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est1 attach returned 6 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est2 attach returned 6 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est3 attach returned 6 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est4 attach returned 6 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est5 attach returned 6 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est6 attach returned 6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est7 attach returned 6 coretemp8: <CPU On-Die Thermal Sensors> on cpu8 est8: <Enhanced SpeedStep Frequency Control> on cpu8 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est8 attach returned 6 coretemp9: <CPU On-Die Thermal Sensors> on cpu9 est9: <Enhanced SpeedStep Frequency Control> on cpu9 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est9 attach returned 6 coretemp10: <CPU On-Die Thermal Sensors> on cpu10 est10: <Enhanced SpeedStep Frequency Control> on cpu10 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est10 attach returned 6 coretemp11: <CPU On-Die Thermal Sensors> on cpu11 est11: <Enhanced SpeedStep Frequency Control> on cpu11 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est11 attach returned 6 coretemp12: <CPU On-Die Thermal Sensors> on cpu12 est12: <Enhanced SpeedStep Frequency Control> on cpu12 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est12 attach returned 6 coretemp13: <CPU On-Die Thermal Sensors> on cpu13 est13: <Enhanced SpeedStep Frequency Control> on cpu13 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est13 attach returned 6 coretemp14: <CPU On-Die Thermal Sensors> on cpu14 est14: <Enhanced SpeedStep Frequency Control> on cpu14 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est14 attach returned 6 coretemp15: <CPU On-Die Thermal Sensors> on cpu15 est15: <Enhanced SpeedStep Frequency Control> on cpu15 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1fdd00001400 device_attach: est15 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec freenas_sysctl: adding account. freenas_sysctl: adding directoryservice. freenas_sysctl: adding middlewared. freenas_sysctl: adding network. freenas_sysctl: adding services. ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled ipmi0: IPMI device rev. 1, firmware rev. 1.66, version 2.0 ipmi0: Number of channels 6 ipmi0: Attached watchdog mfisyspd0 numa-domain 0 on mfi0 mfisyspd0: 244198MB (500118192 sectors) SYSPD volume (deviceid: 0) mfisyspd0: SYSPD volume attached ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 mfisyspd1 numa-domain 0 on mfi0 mfisyspd1: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 1) mfisyspd1: SYSPD volume attached uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mfisyspd2 numa-domain 0 on mfi0 mfisyspd2: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 2) mfisyspd2: SYSPD volume attached uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 mfisyspd3 numa-domain 0 on mfi0 mfisyspd3: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 3) mfisyspd3: SYSPD volume attached mfi0: 1077 (boot + 33s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=554a802048d5a500,0000000000000000 mfi0: 1078 (boot + 33s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 1079 (boot + 33s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221104000000,0000000000000000 mfi0: 1080 (boot + 33s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive mfi0: 1081 (boot + 33s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 1082 (boot + 33s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=4433221105000000,0000000000000000 mfi0: 1083 (boot + 33s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive mfi0: 1084 (boot + 33s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 1085 (boot + 33s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221106000000,0000000000000000 mfi0: 1086 (boot + 33s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive mfi0: 1087 (boot + 33s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 1088 (boot + 33s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=4433221107000000,0000000000000000 mfi0: 1089 (boot + 33s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive mfi0: 1090 (592620831s/0x0020/info) - Time established as 10/12/18 0:53:51; (65 seconds since power on) mfi0: 1091 (592620924s/0x0020/info) - Host driver is loaded and operational uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 uhub4 numa-domain 0 on uhub2 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 ugen1.3: <Avocent Avocent DSRIQ-USB> at usbus1 ukbd0 numa-domain 0 on uhub3 ukbd0: <EP1 Interrupt> on usbus1 kbd2 at ukbd0 uhub4: 6 ports with 6 removable, self powered ugen0.4: <Avocent KeyboardMouse Function> at usbus0 ukbd1 numa-domain 0 on uhub4 ukbd1: <Keyboard> on usbus0 kbd3 at ukbd1 ugen0.5: <Avocent Mass Storage Function> at usbus0 umass0 numa-domain 0 on uhub4 umass0: <SCSI Transparent Interface 0> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:7:0: Attached to scbus7 mfi0: 1092 (592620957s/0x0002/info) - Unexpected sense: Encl PD 20 Path 554a802048d5a500, CDB: 1c 01 b1 04 00 00, Sense: 5/24/00 mfi0: 1093 (592620958s/0x0002/info) - Unexpected sense: Encl PD 20 Path 554a802048d5a500, CDB: 1c 01 b2 04 00 00, Sense: 5/24/00 mfi0: 1094 (592620959s/0x0002/info) - Unexpected sense: Encl PD 20 Path 554a802048d5a500, CDB: 1c 01 b3 04 00 00, Sense: 5/24/00 ses0 at mfi0 bus 0 scbus0 target 32 lun 0 cd0 at ahcich4 bus 0 scbus5 target 0 lun 0 ses0: <DP BP12G+ 1.00> Fixed Enclosure Services SPC-3 SCSI device ses0: 150.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device cd0: <HL-DT-ST DVD-ROM DU70N D300> Removable CD-ROM SCSI device cd0: Serial Number KYGDB7K4104 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed pass0 at mfi0 bus 0 scbus0 target 0 lun 0 cd1 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0 at umass-sim0 bus 0 scbus7 target 0 lun 1 pass0: <ATA INTEL SSDSC2KW25 002C> Fixed Uninstalled SPC-3 SCSI device da0: <iDRAC Virtual Floppy 0329> Removable Direct Access SCSI device da0: 40.000MB/s transfers da0: 620MB (1270298 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> pass0: Serial Number PHLA807607BD256CGN pass0: 150.000MB/s transfers cd1: <iDRAC Virtual CD 0329> Removable CD-ROM SCSI device cd1: 40.000MB/s transfers cd1: 651MB (333672 2048 byte sectors) cd1: quirks=0x10<10_BYTE_ONLY> pass0: Command Queueing enabled pass1 at mfi0 bus 0 scbus0 target 1 lun 0 pass1: <ATA WDC WDS100T2B0A- 90WD> Fixed Uninstalled SPC-3 SCSI device pass1: Serial Number 181579800139 pass1: 150.000MB/s transfers pass1: Command Queueing enabled pass2 at mfi0 bus 0 scbus0 target 2 lun 0 pass2: <ATA WDC WDS100T2B0A- 90WD> Fixed Uninstalled SPC-3 SCSI device pass2: Serial Number 181579800359 pass2: 150.000MB/s transfers pass2: Command Queueing enabled pass3 at mfi0 bus 0 scbus0 target 3 lun 0 pass3: <ATA WDC WDS100T2B0A- 90WD> Fixed Uninstalled SPC-3 SCSI device pass3: Serial Number 181579800362 pass3: 150.000MB/s transfers pass3: Command Queueing enabled random: unblocking device. Trying to mount root from zfs:freenas-boot/ROOT/default []... GEOM_ELI: Device da0p4.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> bge0: link state changed to DOWN bge0: link state changed to UP ums0 numa-domain 0 on uhub4 ums0: <Mouse> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ums1 numa-domain 0 on uhub3 ums2 numa-domain 0 on uhub4 ums2: <Mouse REL> on usbus0 ums2: 3 buttons and [XYZ] coordinates ID=0 ums1: <EP2 Interrupt> on usbus1 ums1: 5 buttons and [XYZ] coordinates ID=1
Thank you
