BUILD Building a server for FreeNas primary for Plex

Status
Not open for further replies.
J

jeffreyj900

Dabbler
Joined
Aug 6, 2014
Messages
19
depasseg - Yes, but for some reason his drives are out of order. da9 not only is missing a serial number, but it's coming up last in the order. You said in a previous post that your boot device was last in the list at da12. Ericloewe, stated in a previous post that the last device was likely the boot device. Wonder if the drive is bad or somehow freeNAS thinks it is a boot device and not usable. Just a thought.
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
depasseg said:
Did you only get 1 cable to attach your motherboard to the backplane? It shouldn't really matter, but you probably want to order a second one. Which port on the backplane did you connect it to?

jeffreyj900 - I noticed an earlier screenshot (the first one) showed all drives displaying serial number, but still having an issue. I have the same MB in a different supermicro chassis (ordered as a system) and it works fine.
Click to expand...
Just 1 cable. It's connected to J0. I ordered 1 cable because I didn't know the LSI 3008 was going to work with a Backplace SAS2. Now I know it does, I should buy another one to drive J1 right?
 
depasseg

depasseg

FreeNAS Replicant
Joined
Sep 16, 2014
Messages
2,874
my last da12-ish device was boot, but it was also USB. the dmesg output displays a later da device in AltecBX's as well, so I'm guessing that is his boot device.

I found this in your dmesg:
Code:
ses0: pass1,da0: Element descriptor: 'Slot 02'
ses0: pass1,da0: SAS Device Slot Element: 1 Phys at Slot 1
ses0:  phy 0: SATA device
ses0:  phy 0: parent 50030480013c1c7f addr 50030480013c1c6d
ses0: pass2,da1: Element descriptor: 'Slot 03'
ses0: pass2,da1: SAS Device Slot Element: 1 Phys at Slot 2
ses0:  phy 0: SATA device
ses0:  phy 0: parent 50030480013c1c7f addr 50030480013c1c6e


This is your enclosure reporting it is starting to count the descriptors at "slot 02" (for phys slot 1). FN might be interpreting the enclosure itself as a device instead of the 1st drive. try popping out all the drives except the 1st one (lower left) and check to see if you have a drive in freenas. (and post dmesg)
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
depasseg said:
Can you do the same from Ubuntu?
You will need to install ssh server:
from the ubuntu cli, type 'apt-get install ssh'
then you can use putty to get there

or instead of dealing with ssh on ubuntu, from a terminal, type 'dmesg > troubleshooting.txt' and then copy the troubleshooting.txt file somewhere more accessible.
Click to expand...
This is from Ubontu (Part 1 of 5):

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079230fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079231000-0x0000000079846fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079847000-0x0000000079920fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079921000-0x0000000079e07fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079e08000-0x000000007bcf2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bcf3000-0x000000007bd51fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007bd52000-0x000000007bd52fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bd53000-0x000000007bdd8fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bdd9000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x7996d000  ACPI 2.0=0x7996d000  SMBIOS=0xf0560  MPS=0xfd600
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000002f000) (0MB)
[    0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000040000) (0MB)
[    0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001501000) (20MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001501000-0x0000000002000000) (10MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003401000) (20MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000003401000-0x000000003585c000) (804MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x000000003585c000-0x0000000036c26000) (19MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000036c26000-0x0000000048d6c000) (289MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000048d6c000-0x00000000662df000) (469MB)
[    0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000662df000-0x000000006635f000) (0MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000006635f000-0x00000000753b8000) (240MB)
[    0.000000] efi: mem13: type=2, attr=0xf, range=[0x00000000753b8000-0x00000000755a0000) (1MB)
[    0.000000] efi: mem14: type=1, attr=0xf, range=[0x00000000755a0000-0x00000000756d4000) (1MB)
[    0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000756d4000-0x0000000078c31000) (53MB)
[    0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000078c31000-0x0000000078ef3000) (2MB)
[    0.000000] efi: mem17: type=3, attr=0xf, range=[0x0000000078ef3000-0x0000000079231000) (3MB)
[    0.000000] efi: mem18: type=0, attr=0xf, range=[0x0000000079231000-0x0000000079847000) (6MB)
[    0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000079847000-0x0000000079917000) (0MB)
[    0.000000] efi: mem20: type=2, attr=0xf, range=[0x0000000079917000-0x0000000079921000) (0MB)
[    0.000000] efi: mem21: type=10, attr=0xf, range=[0x0000000079921000-0x0000000079e08000) (4MB)
[    0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x0000000079e08000-0x000000007bcf3000) (30MB)
[    0.000000] efi: mem23: type=5, attr=0x800000000000000f, range=[0x000000007bcf3000-0x000000007bd52000) (0MB)
[    0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000007bd52000-0x000000007bd53000) (0MB)
[    0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x000000007bd53000-0x000000007bdd9000) (0MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000007bdd9000-0x000000007c000000) (2MB)
[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x0000000100000000-0x0000001080000000) (63488MB)
[    0.000000] efi: mem28: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
[    0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Supermicro X10SRH/X10SRH-CLN4F, BIOS 1.0a 09/19/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000080000000 mask 3FFF80000000 uncachable
[    0.000000]   1 base 380000000000 mask 3FC000000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff8800000fd900]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02fdf000, 0x02fdffff] PGTABLE
[    0.000000] BRK [0x02fe0000, 0x02fe0fff] PGTABLE
[    0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x107fe00000-0x107fffffff]
[    0.000000]  [mem 0x107fe00000-0x107fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x107c000000-0x107fdfffff]
[    0.000000]  [mem 0x107c000000-0x107fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x1000000000-0x107bffffff]
[    0.000000]  [mem 0x1000000000-0x107bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0x79230fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x791fffff] page 2M
[    0.000000]  [mem 0x79200000-0x79230fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79847000-0x79920fff]
[    0.000000]  [mem 0x79847000-0x79920fff] page 4k
[    0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7bd52000-0x7bd52fff]
[    0.000000]  [mem 0x7bd52000-0x7bd52fff] page 4k
[    0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7bdd9000-0x7bffffff]
[    0.000000]  [mem 0x7bdd9000-0x7bdfffff] page 4k
[    0.000000]  [mem 0x7be00000-0x7bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff]
[    0.000000]  [mem 0x100000000-0xfffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x3585c000-0x36c25fff]
[    0.000000] ACPI: RSDP 000000007996d000 000024 (v02 SUPERM)
[    0.000000] ACPI: XSDT 000000007996d0a8 0000CC (v01                 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000007999a2f0 00010C (v05                 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 000000007996d208 02D0E7 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
[    0.000000] ACPI: FACS 0000000079e05f80 000040
[    0.000000] ACPI: APIC 000000007999a400 000100 (v03                 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 000000007999a500 000044 (v01                 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 000000007999a548 00009C (v01                 01072009 AMI  00010013)
[    0.000000] ACPI: SPMI 000000007999a5e8 000040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
[    0.000000] ACPI: MCFG 000000007999a628 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
[    0.000000] ACPI: UEFI 000000007999a668 000042 (v01 SUPERM SMCI--MB 01072009      00000000)
[    0.000000] ACPI: BDAT 000000007999a6b0 000030 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
[    0.000000] ACPI: HPET 000000007999a6e0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
[    0.000000] ACPI: PMCT 000000007999a718 000064 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
[    0.000000] ACPI: WDDT 000000007999a780 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
[    0.000000] ACPI: SSDT 000000007999a7c0 00EDE7 (v01 SUPERM    PmMgt 00000001 INTL 20120913)
[    0.000000] ACPI: BGRT 00000000799a95a8 000038 (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000799a95e0 002117 (v02 SUPERM SpsNm    00000002 INTL 20120913)
[    0.000000] ACPI: SSDT 00000000799ab6f8 000064 (v02 SUPERM SpsNvs   00000002 INTL 20120913)
[    0.000000] ACPI: PRAD 00000000799ab760 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
[    0.000000] ACPI: DMAR 00000000799ab868 0000D4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
[    0.000000] ACPI: HEST 00000000799ab940 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
[    0.000000] ACPI: BERT 00000000799ab9e8 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
[    0.000000] ACPI: ERST 00000000799aba18 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 00000000799abc48 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000107fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x107fffffff]
[    0.000000]   NODE_DATA [mem 0x107fff9000-0x107fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0041ffffff] PMD -> [ffff88103f600000-ffff88107f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x107fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x79230fff]
[    0.000000]   node   0: [mem 0x79847000-0x79920fff]
[    0.000000]   node   0: [mem 0x7bd52000-0x7bd52fff]
[    0.000000]   node   0: [mem 0x7bdd9000-0x7bffffff]
[    0.000000]   node   0: [mem 0x100000000-0x107fffffff]
[    0.000000] On node 0 totalpages: 16749778
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 45 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7701 pages used for memmap
[    0.000000]   DMA32 zone: 492851 pages, LIFO batch:31
[    0.000000]   Normal zone: 253952 pages used for memmap
[    0.000000]   Normal zone: 16252928 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79231000-0x79846fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79921000-0x79e07fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79e08000-0x7bcf2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bcf3000-0x7bd51fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bd53000-0x7bdd8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88107fc00000 s86336 r8192 d24256 u131072
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16488016
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 65785372K/66999112K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 1213740K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[    0.000000]     Offload RCU callbacks from all CPUs
[    0.000000]     Offload RCU callbacks from CPUs: 0-11.
[    0.000000] NR_IRQS:16640 nr_irqs:1184 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 268435456 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3499.872 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.74 BogoMIPS (lpj=13999488)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000315] Security Framework initialized
[    0.000329] AppArmor: AppArmor initialized
[    0.000330] Yama: becoming mindful.
[    0.003111] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[    0.011453] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.014992] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015039] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015390] Initializing cgroup subsys memory
[    0.015395] Initializing cgroup subsys devices
[    0.015396] Initializing cgroup subsys freezer
[    0.015397] Initializing cgroup subsys blkio
[    0.015398] Initializing cgroup subsys perf_event
[    0.015399] Initializing cgroup subsys hugetlb
[    0.015416] CPU: Physical Processor ID: 0
[    0.015417] CPU: Processor Core ID: 0
[    0.016242] mce: CPU supports 22 MCE banks
[    0.016274] CPU0: Thermal monitoring enabled (TM1)
[    0.016299] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016299] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.016299] tlb_flushall_shift: 6
[    0.016381] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[    0.017116] ACPI: Core revision 20131115
[    0.029920] ACPI: All ACPI Tables successfully acquired
[    0.031481] ftrace: allocating 28495 entries in 112 pages
[    0.040304] dmar: Host address width 46
[    0.040305] dmar: DRHD base: 0x000000fbffc000 flags: 0x1
[    0.040310] dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
[    0.040311] dmar: RMRR base: 0x0000007bacc000 end: 0x0000007badafff
[    0.040312] dmar: ATSR flags: 0x0
[    0.040313] dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
[    0.040402] IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 0
[    0.040403] IOAPIC id 9 under DRHD base  0xfbffc000 IOMMU 0
[    0.040404] HPET id 0 under DRHD base 0xfbffc000
[    0.040404] Your BIOS is broken and requested that x2apic be disabled.
[    0.040404] This will slightly decrease performance.
[    0.040404] Use 'intremap=no_x2apic_optout' to override BIOS request.
[    0.040494] Enabled IRQ remapping in xapic mode
[    0.040495] x2apic not enabled, IRQ remapping is in xapic mode
[    0.040498] Switched APIC routing to physical flat.
[    0.040998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080813] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1650 v3 @ 3.50GHz (fam: 06, model: 3f, stepping: 02)
[    0.080818] TSC deadline timer enabled
[    0.080824] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.080828] ... version:                3
[    0.080829] ... bit width:              48
[    0.080829] ... generic registers:      4
[    0.080830] ... value mask:             0000ffffffffffff
[    0.080831] ... max period:             0000ffffffffffff
[    0.080831] ... fixed-purpose events:   3
[    0.080832] ... event mask:             000000070000000f
[    0.081995] x86: Booting SMP configuration:
[    0.135889] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.081997] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.319884] x86: Booted up 1 node, 12 CPUs
[    0.319887] smpboot: Total of 12 processors activated (83996.92 BogoMIPS)
[    0.334382] devtmpfs: initialized
[    0.337834] EVM: security.selinux
[    0.337835] EVM: security.SMACK64
[    0.337836] EVM: security.ima
[    0.337836] EVM: security.capability
[    0.337865] PM: Registering ACPI NVS region [mem 0x79921000-0x79e07fff] (5140480 bytes)
[    0.338388] pinctrl core: initialized pinctrl subsystem
[    0.338428] regulator-dummy: no parameters
[    0.338454] RTC time:  3:25:17, date: 12/08/14
[    0.338478] NET: Registered protocol family 16
[    0.338539] cpuidle: using governor ladder
[    0.338540] cpuidle: using governor menu
[    0.338563] ACPI: bus type PCI registered
[    0.338565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.338598] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[    0.338600] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[    0.351571] PCI: Using configuration type 1 for base access
[    0.352499] bio: create slab <bio-0> at 0
[    0.352624] ACPI: Added _OSI(Module Device)
[    0.352625] ACPI: Added _OSI(Processor Device)
[    0.352626] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.352626] ACPI: Added _OSI(Processor Aggregator Device)
[    0.365220] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.412180] ACPI: Dynamic OEM Table Load:
[    0.412182] ACPI: PRAD           (null) 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
[    0.416686] ACPI: Interpreter enabled
[    0.416690] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.416693] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.416695] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[    0.416700] ACPI: (supports S0 S4 S5)
[    0.416701] ACPI: Using IOAPIC for interrupt routing
[    0.416734] HEST: Table parsing has been initialized.
[    0.416736] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.417134] ACPI: No dock devices found.
[    0.425699] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[    0.425702] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.426933] acpi PNP0A03:00: _OSC: platform does not support [AER]
[    0.427404] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[    0.427425] PCI host bridge to bus 0000:ff
[    0.427427] pci_bus 0000:ff: root bus resource [bus ff]
[    0.427434] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
[    0.427464] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
[    0.427487] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
[    0.427512] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
[    0.427534] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
[    0.427556] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
[    0.427578] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
[    0.427601] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
[    0.427624] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
[    0.427646] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
[    0.427668] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
[    0.427690] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
[    0.427712] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
[    0.427734] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
[    0.427756] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
[    0.427778] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
[    0.427802] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
[    0.427823] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
[    0.427844] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
[    0.427866] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
[    0.427890] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
[    0.427916] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
[    0.427942] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
[    0.427968] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
[    0.427994] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
[    0.428020] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
[    0.428047] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
[    0.428073] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
[    0.428097] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
[    0.428121] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
[    0.428147] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
[    0.428173] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
[    0.428200] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
[    0.428226] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
[    0.428250] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
[    0.428274] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
[    0.428302] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
[    0.428328] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
[    0.428355] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
[    0.428383] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
[    0.428409] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
[    0.428435] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
[    0.428459] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
[    0.428484] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
[    0.428509] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
[    0.428532] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
[    0.428557] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
[    0.428584] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
[    0.428608] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
[    0.428631] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
[    0.428654] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
[    0.428658] pci 0000:ff:1e.3: reg 0x10: [io  0x0020-0x003f]
[    0.428679] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
[    0.428704] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
[    0.428727] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
[    0.429840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.429843] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.430137] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.430617] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[    0.431121] PCI host bridge to bus 0000:00
 
Last edited:
M

mjws00

Guru
Joined
Jul 25, 2014
Messages
798
Another way I'd break this down when you're done testing other os' s. Fire it up with no drives and hot swap them in one at a time. They'll show up in the console in real time as detected. You might isolate a drive or a slot... or see a behavior for a clue. The count where failure to detect a new drive occurs may also be consistent. Just things I'd play with if it were on my bench.
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
This is from Ubontu (Part 2 of 5):

Code:
[    0.431123] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.431124] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.431125] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.431126] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.431127] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    0.431128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.431129] pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f]
[    0.431129] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f]
[    0.431130] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
[    0.431136] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
[    0.431214] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
[    0.431244] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.431289] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.431308] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
[    0.431337] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.431378] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.431394] pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
[    0.431423] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.431464] pci 0000:00:02.2: System wakeup disabled by ACPI
[    0.431480] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
[    0.431510] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.431550] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.431566] pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
[    0.431595] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.431636] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.431650] pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
[    0.431680] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.431720] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.431736] pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
[    0.431743] pci 0000:00:04.0: reg 0x10: [mem 0xfb42c000-0xfb42ffff 64bit]
[    0.431821] pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
[    0.431827] pci 0000:00:04.1: reg 0x10: [mem 0xfb428000-0xfb42bfff 64bit]
[    0.431902] pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
[    0.431908] pci 0000:00:04.2: reg 0x10: [mem 0xfb424000-0xfb427fff 64bit]
[    0.431984] pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
[    0.431990] pci 0000:00:04.3: reg 0x10: [mem 0xfb420000-0xfb423fff 64bit]
[    0.432065] pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
[    0.432071] pci 0000:00:04.4: reg 0x10: [mem 0xfb41c000-0xfb41ffff 64bit]
[    0.432145] pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
[    0.432151] pci 0000:00:04.5: reg 0x10: [mem 0xfb418000-0xfb41bfff 64bit]
[    0.432226] pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
[    0.432232] pci 0000:00:04.6: reg 0x10: [mem 0xfb414000-0xfb417fff 64bit]
[    0.432307] pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
[    0.432313] pci 0000:00:04.7: reg 0x10: [mem 0xfb410000-0xfb413fff 64bit]
[    0.432387] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
[    0.432454] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
[    0.432527] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
[    0.432596] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
[    0.432600] pci 0000:00:05.4: reg 0x10: [mem 0xfb439000-0xfb439fff]
[    0.432684] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[    0.432810] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[    0.432825] pci 0000:00:11.4: reg 0x10: [io  0xf110-0xf117]
[    0.432832] pci 0000:00:11.4: reg 0x14: [io  0xf100-0xf103]
[    0.432839] pci 0000:00:11.4: reg 0x18: [io  0xf0f0-0xf0f7]
[    0.432846] pci 0000:00:11.4: reg 0x1c: [io  0xf0e0-0xf0e3]
[    0.432852] pci 0000:00:11.4: reg 0x20: [io  0xf020-0xf03f]
[    0.432859] pci 0000:00:11.4: reg 0x24: [mem 0xfb438000-0xfb4387ff]
[    0.432898] pci 0000:00:11.4: PME# supported from D3hot
[    0.432958] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[    0.432972] pci 0000:00:14.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit]
[    0.433017] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.433064] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.433084] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[    0.433100] pci 0000:00:16.0: reg 0x10: [mem 0xfb437000-0xfb43700f 64bit]
[    0.433153] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.433209] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
[    0.433224] pci 0000:00:16.1: reg 0x10: [mem 0xfb436000-0xfb43600f 64bit]
[    0.433277] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[    0.433344] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[    0.433361] pci 0000:00:1a.0: reg 0x10: [mem 0xfb434000-0xfb4343ff]
[    0.433573] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.433623] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.433642] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[    0.433699] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.433742] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.433764] pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
[    0.433820] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.433865] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.433887] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[    0.433904] pci 0000:00:1d.0: reg 0x10: [mem 0xfb433000-0xfb4333ff]
[    0.433983] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.434032] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.434052] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[    0.434197] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
[    0.434210] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.434216] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.434221] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.434227] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.434233] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf01f]
[    0.434238] pci 0000:00:1f.2: reg 0x24: [mem 0xfb432000-0xfb4327ff]
[    0.434270] pci 0000:00:1f.2: PME# supported from D3hot
[    0.434323] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[    0.434333] pci 0000:00:1f.3: reg 0x10: [mem 0xfb431000-0xfb4310ff 64bit]
[    0.434345] pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
[    0.434681] pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000
[    0.434697] pci 0000:00:1f.6: reg 0x10: [mem 0xfb430000-0xfb430fff 64bit]
[    0.434903] pci 0000:01:00.0: [1000:0097] type 00 class 0x010700
[    0.434909] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.434915] pci 0000:01:00.0: reg 0x14: [mem 0xfb200000-0xfb20ffff 64bit]
[    0.434928] pci 0000:01:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]
[    0.434964] pci 0000:01:00.0: supports D1 D2
[    0.439304] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.439306] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.439307] pci 0000:00:01.0:   bridge window [mem 0xfb100000-0xfb2fffff]
[    0.439400] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.439495] pci 0000:00:02.2: PCI bridge to [bus 03]
[    0.439588] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.439678] pci 0000:00:03.2: PCI bridge to [bus 05]
[    0.440322] pci 0000:06:00.0: [8086:1521] type 00 class 0x020000
[    0.440532] pci 0000:06:00.0: reg 0x10: [mem 0xfb360000-0xfb37ffff]
[    0.440825] pci 0000:06:00.0: reg 0x18: [io  0xd060-0xd07f]
[    0.440972] pci 0000:06:00.0: reg 0x1c: [mem 0xfb38c000-0xfb38ffff]
[    0.442272] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.442682] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.442815] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.443239] pci 0000:06:00.1: [8086:1521] type 00 class 0x020000
[    0.443450] pci 0000:06:00.1: reg 0x10: [mem 0xfb340000-0xfb35ffff]
[    0.443743] pci 0000:06:00.1: reg 0x18: [io  0xd040-0xd05f]
[    0.443890] pci 0000:06:00.1: reg 0x1c: [mem 0xfb388000-0xfb38bfff]
[    0.445191] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[    0.445537] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.445670] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.446092] pci 0000:06:00.2: [8086:1521] type 00 class 0x020000
[    0.446302] pci 0000:06:00.2: reg 0x10: [mem 0xfb320000-0xfb33ffff]
[    0.446597] pci 0000:06:00.2: reg 0x18: [io  0xd020-0xd03f]
[    0.446744] pci 0000:06:00.2: reg 0x1c: [mem 0xfb384000-0xfb387fff]
[    0.448045] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
[    0.448391] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.448524] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.448946] pci 0000:06:00.3: [8086:1521] type 00 class 0x020000
[    0.449156] pci 0000:06:00.3: reg 0x10: [mem 0xfb300000-0xfb31ffff]
[    0.449449] pci 0000:06:00.3: reg 0x18: [io  0xd000-0xd01f]
[    0.449596] pci 0000:06:00.3: reg 0x1c: [mem 0xfb380000-0xfb383fff]
[    0.450896] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.451242] pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.451416] pci 0000:06:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.459532] pci 0000:00:03.3: PCI bridge to [bus 06]
[    0.459534] pci 0000:00:03.3:   bridge window [io  0xd000-0xdfff]
[    0.459535] pci 0000:00:03.3:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.459576] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.459641] pci 0000:08:00.0: [1a03:1150] type 01 class 0x060400
[    0.459750] pci 0000:08:00.0: supports D1 D2
[    0.459751] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.459786] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.459794] pci 0000:00:1c.6: PCI bridge to [bus 08-09]
[    0.459796] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.459798] pci 0000:00:1c.6:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.459881] pci 0000:09:00.0: [1a03:2000] type 00 class 0x030000
[    0.459907] pci 0000:09:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.459919] pci 0000:09:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
[    0.459932] pci 0000:09:00.0: reg 0x18: [io  0xc000-0xc07f]
[    0.460031] pci 0000:09:00.0: supports D1 D2
[    0.460031] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.460111] pci 0000:08:00.0: PCI bridge to [bus 09]
[    0.460118] pci 0000:08:00.0:   bridge window [io  0xc000-0xcfff]
[    0.460121] pci 0000:08:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.460239] pci_bus 0000:00: on NUMA node 0 (pxm 0)
[    0.460896] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.460930] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.460959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.460987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.461015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.461044] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.461072] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.461101] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.461204] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.461208] ACPI: \_SB_.UNC0: notify handler is installed
[    0.461221] ACPI: \_SB_.PCI0: notify handler is installed
[    0.461354] Found 2 acpi root devices
[    0.461432] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.461433] vgaarb: loaded
[    0.461433] vgaarb: bridge control possible 0000:09:00.0
[    0.461519] SCSI subsystem initialized
[    0.461552] libata version 3.00 loaded.
[    0.461563] ACPI: bus type USB registered
[    0.461572] usbcore: registered new interface driver usbfs
[    0.461576] usbcore: registered new interface driver hub
[    0.461589] usbcore: registered new device driver usb
[    0.461668] PCI: Using ACPI for IRQ routing
[    0.466862] PCI: pci_cache_line_size set to 64 bytes
[    0.467003] pci 0000:ff:1e.3: no compatible bridge window for [io  0x0020-0x003f]
[    0.467112] e820: reserve RAM buffer [mem 0x79231000-0x7bffffff]
[    0.467114] e820: reserve RAM buffer [mem 0x79921000-0x7bffffff]
[    0.467115] e820: reserve RAM buffer [mem 0x7bd53000-0x7bffffff]
[    0.467164] NetLabel: Initializing
[    0.467164] NetLabel:  domain hash size = 128
[    0.467165] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.467172] NetLabel:  unlabeled traffic allowed by default
[    0.467204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.467207] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.469245] Switched to clocksource hpet
[    0.472040] AppArmor: AppArmor Filesystem Enabled
[    0.472053] pnp: PnP ACPI init
[    0.472059] ACPI: bus type PNP registered
[    0.472158] pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.472167] pnp 00:01: [dma 4]
[    0.472179] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.472200] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.472227] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.472246] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.472276] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.472289] pnp 00:06: disabling [io  0x0010-0x001f] because it overlaps 0000:ff:1e.3 BAR 0 [io  0x0000-0x001f]
[    0.472321] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.472322] system 00:06: [io  0x0400-0x047f] could not be reserved
[    0.472323] system 00:06: [io  0x0580-0x059f] has been reserved
[    0.472324] system 00:06: [io  0x0600-0x061f] has been reserved
[    0.472325] system 00:06: [io  0x0880-0x0883] has been reserved
[    0.472326] system 00:06: [io  0x0800-0x081f] has been reserved
[    0.472328] system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
[    0.472329] system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
[    0.472330] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.472331] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.472332] system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
[    0.472333] system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
[    0.472334] system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.472335] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472450] system 00:07: [io  0x0a00-0x0a0f] has been reserved
[    0.472451] system 00:07: [io  0x0a10-0x0a1f] has been reserved
[    0.472452] system 00:07: [io  0x0a20-0x0a2f] has been reserved
[    0.472453] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    0.472454] system 00:07: [io  0x0a40-0x0a4f] has been reserved
[    0.472456] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472579] pnp 00:08: [dma 0 disabled]
[    0.472610] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.472740] pnp 00:09: [dma 0 disabled]
[    0.472765] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.472830] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001 (active)
[    0.473109] pnp: PnP ACPI: found 11 devices
[    0.473110] ACPI: bus type PNP unregistered
[    0.478736] pci 0000:ff:1e.3: BAR 0: can't assign io (size 0x20)
[    0.478738] pci 0000:ff:1e.3: BAR 0: trying firmware assignment [io  0x0020-0x003f]
[    0.478739] pci 0000:ff:1e.3: BAR 0: [io  0x0020-0x003f] conflicts with PCI Bus 0000:00 [io  0x0000-0x03af]
[    0.478741] pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.478743] pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
[    0.478867] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.478934] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479002] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479070] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479137] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479205] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479272] pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479340] pci 0000:06:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479364] pci 0000:00:03.3: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
[    0.479365] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
[    0.479367] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
[    0.479368] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.479369] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.479371] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.479373] pci 0000:00:01.0:   bridge window [mem 0xfb100000-0xfb2fffff]
[    0.479376] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.479381] pci 0000:00:02.2: PCI bridge to [bus 03]
[    0.479385] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.479389] pci 0000:00:03.2: PCI bridge to [bus 05]
[    0.479460] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479527] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479595] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479663] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479730] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479798] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479865] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.479933] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480001] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480068] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480136] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480203] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480271] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480338] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480406] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480473] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480541] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480608] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480676] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480744] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480811] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480879] pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.480946] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481014] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481081] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481149] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481217] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481307] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481375] pci 0000:06:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481442] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481510] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481577] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481645] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481712] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481780] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481847] pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481915] pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.481916] pci 0000:06:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
[    0.482049] pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.482050] pci 0000:06:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
[    0.482182] pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.482183] pci 0000:06:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
[    0.482315] pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.482316] pci 0000:06:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
[    0.482719] pci 0000:06:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.482720] pci 0000:06:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref]
[    0.482872] pci 0000:06:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.482873] pci 0000:06:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref]
[    0.483006] pci 0000:06:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
[    0.483007] pci 0000:06:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref]
[    0.483139] pci 0000:06:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
[    0.483140] pci 0000:06:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref]
[    0.483205] pci 0000:00:03.3: PCI bridge to [bus 06]
[    0.483206] pci 0000:00:03.3:   bridge window [io  0xd000-0xdfff]
[    0.483208] pci 0000:00:03.3:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.483210] pci 0000:00:03.3:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
[    0.483213] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.483214] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.483217] pci 0000:00:1c.0:   bridge window [mem 0x90100000-0x902fffff]
[    0.483220] pci 0000:00:1c.0:   bridge window [mem 0x90300000-0x904fffff 64bit pref]
[    0.483224] pci 0000:08:00.0: PCI bridge to [bus 09]
[    0.483226] pci 0000:08:00.0:   bridge window [io  0xc000-0xcfff]
[    0.483231] pci 0000:08:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.483241] pci 0000:00:1c.6: PCI bridge to [bus 08-09]
[    0.483243] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.483246] pci 0000:00:1c.6:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.483251] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.483252] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.483253] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.483254] pci_bus 0000:00: resource 7 [io  0x1000-0xffff]
[    0.483255] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.483256] pci_bus 0000:00: resource 9 [mem 0xfedb0000-0xfedb000f]
[    0.483257] pci_bus 0000:00: resource 10 [mem 0xfedc0000-0xfedc000f]
[    0.483258] pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff]
[    0.483259] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.483260] pci_bus 0000:01: resource 1 [mem 0xfb100000-0xfb2fffff]
[    0.483261] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.483262] pci_bus 0000:06: resource 1 [mem 0xfb300000-0xfb3fffff]
[    0.483262] pci_bus 0000:06: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[    0.483263] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.483264] pci_bus 0000:07: resource 1 [mem 0x90100000-0x902fffff]
[    0.483265] pci_bus 0000:07: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
[    0.483266] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.483267] pci_bus 0000:08: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.483268] pci_bus 0000:09: resource 0 [io  0xc000-0xcfff]
[    0.483269] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.483287] NET: Registered protocol family 2
[    0.483530] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.483992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.484101] TCP: Hash tables configured (established 524288 bind 65536)
[    0.484116] TCP: reno registered
[    0.484157] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.484303] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.484446] NET: Registered protocol family 1
[    0.521541] pci 0000:09:00.0: Boot video device
[    0.521547] PCI: CLS 64 bytes, default 64
[    0.521622] Trying to unpack rootfs image as initramfs...
[    3.127619] Freeing initrd memory: 20264K (ffff88003585c000 - ffff880036c26000)
[    3.127630] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.127632] software IO TLB [mem 0x716d4000-0x756d4000] (64MB) mapped at [ffff8800716d4000-ffff8800756d3fff]
[    3.127862] microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x29
[    3.127865] microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x29
[    3.127869] microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x29
[    3.127874] microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x29
[    3.127879] microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x29
[    3.127884] microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x29
[    3.127890] microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x29
[    3.127894] microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x29
[    3.127899] microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x29
[    3.127903] microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x29
[    3.127907] microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x29
[    3.127911] microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x29
[    3.127956] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
This is from Ubontu (Part 3 of 5)

Code:
[    3.127957] Scanning for low memory corruption every 60 seconds
[    3.128153] Initialise system trusted keyring
[    3.128180] audit: initializing netlink socket (disabled)
[    3.128187] type=2000 audit(1418009118.988:1): initialized
[    3.146568] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.148774] zbud: loaded
[    3.148866] VFS: Disk quotas dquot_6.5.2
[    3.148891] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.149131] fuse init (API version 7.22)
[    3.149179] msgmni has been set to 32768
[    3.149211] Key type big_key registered
[    3.149568] Key type asymmetric registered
[    3.149570] Asymmetric key parser 'x509' registered
[    3.149587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.149636] io scheduler noop registered
[    3.149637] io scheduler deadline registered (default)
[    3.149651] io scheduler cfq registered
[    3.149841] pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
[    3.149921] pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
[    3.149989] pcieport 0000:00:02.2: irq 67 for MSI/MSI-X
[    3.150061] pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
[    3.150128] pcieport 0000:00:03.2: irq 69 for MSI/MSI-X
[    3.150196] pcieport 0000:00:03.3: irq 70 for MSI/MSI-X
[    3.150272] pcieport 0000:00:1c.0: irq 71 for MSI/MSI-X
[    3.150364] pcieport 0000:00:1c.6: irq 72 for MSI/MSI-X
[    3.150419] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    3.150420] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.150422] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    3.150429] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    3.150431] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[    3.150438] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[    3.150440] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
[    3.150447] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[    3.150449] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[    3.150456] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
[    3.150457] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
[    3.150464] pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt
[    3.150465] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    3.150466] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    3.150467] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    3.150468] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    3.150469] pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded
[    3.150477] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    3.150480] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    3.150488] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    3.150489] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    3.150490] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    3.150492] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    3.150503] ioapic: probe of 0000:00:05.4 failed with error -22
[    3.150507] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.150525] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8d10 ss_vid 15d9 ss_did 838
[    3.150559] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    3.150561] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.150597] efifb: probing for efifb
[    3.150727] efifb: framebuffer at 0xfa000000, mapped to 0xffffc90016a80000, using 1920k, total 1920k
[    3.150728] efifb: mode is 800x600x32, linelength=3200, pages=1
[    3.150729] efifb: scrolling: redraw
[    3.150730] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.161092] Console: switching to colour frame buffer device 100x37
[    3.171286] fb0: EFI VGA frame buffer device
[    3.171293] intel_idle: MWAIT substates: 0x2120
[    3.171293] intel_idle: v0.4 model 0x3F
[    3.171294] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.171419] ipmi message handler version 39.2
[    3.171497] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    3.171500] ACPI: Power Button [PWRB]
[    3.171517] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.171518] ACPI: Power Button [PWRF]
[    3.190244] ERST: Error Record Serialization Table (ERST) support is initialized.
[    3.190248] pstore: Registered erst as persistent store backend
[    3.190379] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[    3.190439] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.210919] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.231409] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.232173] Linux agpgart interface v0.103
[    3.232897] brd: module loaded
[    3.233265] loop: module loaded
[    3.233493] libphy: Fixed MDIO Bus: probed
[    3.233534] tun: Universal TUN/TAP device driver, 1.6
[    3.233535] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.233560] PPP generic driver version 2.4.2
[    3.233586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.233589] ehci-pci: EHCI PCI platform driver
[    3.233668] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.233672] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.233682] ehci-pci 0000:00:1a.0: debug port 2
[    3.237593] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.237601] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000
[    3.249317] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.249342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.249343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.249344] usb usb1: Product: EHCI Host Controller
[    3.249345] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    3.249346] usb usb1: SerialNumber: 0000:00:1a.0
[    3.249405] hub 1-0:1.0: USB hub found
[    3.249409] hub 1-0:1.0: 2 ports detected
[    3.249543] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.249546] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.249555] ehci-pci 0000:00:1d.0: debug port 2
[    3.253453] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.253455] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000
[    3.265340] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.265364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.265365] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.265366] usb usb2: Product: EHCI Host Controller
[    3.265367] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    3.265367] usb usb2: SerialNumber: 0000:00:1d.0
[    3.265421] hub 2-0:1.0: USB hub found
[    3.265424] hub 2-0:1.0: 2 ports detected
[    3.265487] ehci-platform: EHCI generic platform driver
[    3.265492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.265493] ohci-pci: OHCI PCI platform driver
[    3.265501] ohci-platform: OHCI generic platform driver
[    3.265504] uhci_hcd: USB Universal Host Controller Interface driver
[    3.265576] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.265579] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    3.265655] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.265693] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.265694] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.265695] usb usb3: Product: xHCI Host Controller
[    3.265696] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    3.265697] usb usb3: SerialNumber: 0000:00:14.0
[    3.265767] hub 3-0:1.0: USB hub found
[    3.265783] hub 3-0:1.0: 15 ports detected
[    3.274745] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.274747] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    3.274775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.274776] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.274777] usb usb4: Product: xHCI Host Controller
[    3.274778] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    3.274778] usb usb4: SerialNumber: 0000:00:14.0
[    3.274851] hub 4-0:1.0: USB hub found
[    3.274861] hub 4-0:1.0: 6 ports detected
[    3.281393] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    4.126614] tsc: Refined TSC clocksource calibration: 3499.997 MHz
[    4.308602] i8042: No controller found
[    4.308790] mousedev: PS/2 mouse device common for all mice
[    4.308857] rtc_cmos 00:02: RTC can wake from S4
[    4.308954] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.308978] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.309011] device-mapper: uevent: version 1.0.3
[    4.309042] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    4.309047] ledtrig-cpu: registered to indicate activity on CPUs
[    4.309048] EFI Variables Facility v0.08 2004-May-17
[    4.310669] TCP: cubic registered
[    4.310714] NET: Registered protocol family 10
[    4.310814] NET: Registered protocol family 17
[    4.310818] Key type dns_resolver registered
[    4.311040] Loading compiled-in X.509 certificates
[    4.311545] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[    4.311551] registered taskstats version 1
[    4.314790] Key type trusted registered
[    4.316021] Key type encrypted registered
[    4.317257] AppArmor: AppArmor sha1 policy hashing enabled
[    4.317258] IMA: No TPM chip found, activating TPM-bypass!
[    4.317721] regulator-dummy: disabling
[    4.317777]   Magic number: 10:327:411
[    4.317967] rtc_cmos 00:02: setting system clock to 2014-12-08 03:25:21 UTC (1418009121)
[    4.318867] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.318868] EDD information not available.
[    4.318897] PM: Hibernation image not present or could not be loaded.
[    4.319472] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    4.319473] Write protecting the kernel read-only data: 12288k
[    4.320818] Freeing unused kernel memory: 816K (ffff880002734000 - ffff880002800000)
[    4.321856] Freeing unused kernel memory: 696K (ffff880002b52000 - ffff880002c00000)
[    4.330981] systemd-udevd[179]: starting version 204
[    4.356815] wmi: Mapper loaded
[    4.357722] pps_core: LinuxPPS API ver. 1 registered
[    4.357724] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.358654] ahci 0000:00:11.4: version 3.0
[    4.358766] ahci 0000:00:11.4: irq 73 for MSI/MSI-X
[    4.358821] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.358824] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
[    4.358884] PTP clock support registered
[    4.359807] dca service started, version 1.12.1
[    4.360485] [drm] Initialized drm 1.1.0 20060810
[    4.360833] mpt3sas version 02.100.00.00 loaded
[    4.361053] scsi0 : Fusion MPT SAS Host
[    4.361252] mpt3sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65869268 kB)
[    4.361275] mpt3sas0: MSI-X vectors supported: 8, no of cores: 12, max_msix_vectors: 8
[    4.361300] mpt3sas 0000:01:00.0: irq 74 for MSI/MSI-X
[    4.361307] mpt3sas 0000:01:00.0: irq 75 for MSI/MSI-X
[    4.361313] mpt3sas 0000:01:00.0: irq 76 for MSI/MSI-X
[    4.361319] mpt3sas 0000:01:00.0: irq 77 for MSI/MSI-X
[    4.361325] mpt3sas 0000:01:00.0: irq 78 for MSI/MSI-X
[    4.361331] mpt3sas 0000:01:00.0: irq 79 for MSI/MSI-X
[    4.361337] mpt3sas 0000:01:00.0: irq 80 for MSI/MSI-X
[    4.361343] mpt3sas 0000:01:00.0: irq 81 for MSI/MSI-X
[    4.361418] mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 74
[    4.361419] mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 75
[    4.361420] mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 76
[    4.361421] mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 77
[    4.361422] mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 78
[    4.361423] mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 79
[    4.361424] mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 80
[    4.361425] mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 81
[    4.361426] mpt3sas0: iomem(0x00000000fb200000), mapped(0xffffc90016a20000), size(65536)
[    4.361427] mpt3sas0: ioport(0x000000000000e000), size(256)
[    4.361827] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[    4.361828] igb: Copyright (c) 2007-2013 Intel Corporation.
[    4.362995] igb 0000:06:00.0: irq 82 for MSI/MSI-X
[    4.363000] igb 0000:06:00.0: irq 83 for MSI/MSI-X
[    4.363013] igb 0000:06:00.0: irq 84 for MSI/MSI-X
[    4.363017] igb 0000:06:00.0: irq 85 for MSI/MSI-X
[    4.363021] igb 0000:06:00.0: irq 86 for MSI/MSI-X
[    4.363036] igb 0000:06:00.0: irq 87 for MSI/MSI-X
[    4.363042] igb 0000:06:00.0: irq 88 for MSI/MSI-X
[    4.363048] igb 0000:06:00.0: irq 89 for MSI/MSI-X
[    4.363060] igb 0000:06:00.0: irq 90 for MSI/MSI-X
[    4.363525] igb 0000:06:00.0: irq 82 for MSI/MSI-X
[    4.363531] igb 0000:06:00.0: irq 83 for MSI/MSI-X
[    4.363543] igb 0000:06:00.0: irq 84 for MSI/MSI-X
[    4.363549] igb 0000:06:00.0: irq 85 for MSI/MSI-X
[    4.363554] igb 0000:06:00.0: irq 86 for MSI/MSI-X
[    4.363709] igb 0000:06:00.0: irq 87 for MSI/MSI-X
[    4.363716] igb 0000:06:00.0: irq 88 for MSI/MSI-X
[    4.363722] igb 0000:06:00.0: irq 89 for MSI/MSI-X
[    4.363735] igb 0000:06:00.0: irq 90 for MSI/MSI-X
[    4.366632] [drm] AST 2300 detected
[    4.366648] [drm] dram 1632000000 1 16 01000000
[    4.366689] [TTM] Zone  kernel: Available graphics memory: 32934634 kiB
[    4.366690] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.366690] [TTM] Initializing pool allocator
[    4.366693] [TTM] Initializing DMA pool allocator
[    4.383206] scsi1 : ahci
[    4.383266] scsi2 : ahci
[    4.383318] scsi3 : ahci
[    4.383377] scsi4 : ahci
[    4.383399] ata1: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438100 irq 73
[    4.383402] ata2: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438180 irq 73
[    4.383404] ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 73
[    4.383406] ata4: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438280 irq 73
[    4.383539] ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
[    4.383627] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    4.383628] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    4.416690] mpt3sas0: sending message unit reset !!
[    4.418202] mpt3sas0: message unit reset: SUCCESS
[    4.423267] scsi5 : ahci
[    4.423324] scsi6 : ahci
[    4.423378] scsi7 : ahci
[    4.423419] scsi8 : ahci
[    4.423466] scsi9 : ahci
[    4.423511] scsi10 : ahci
[    4.423529] ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 91
[    4.423532] ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 91
[    4.423534] ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 91
[    4.423536] ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 91
[    4.423537] ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 91
[    4.423539] ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 91
[    4.445239] checking generic (fa000000 1e0000) vs hw (fa000000 1000000)
[    4.445241] fb: conflicting fb hw usage astdrmfb vs EFI VGA - removing generic driver
[    4.445250] Console: switching to colour dummy device 80x25
[    4.445322] fbcon: astdrmfb (fb0) is primary device
[    4.447760] igb 0000:06:00.0: added PHC on eth0
[    4.447767] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[    4.447768] igb 0000:06:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:31:ad:94
[    4.448060] igb 0000:06:00.0: eth0: PBA No: 050B00-000
[    4.448061] igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    4.450347] igb 0000:06:00.1: irq 92 for MSI/MSI-X
[    4.450429] igb 0000:06:00.1: irq 93 for MSI/MSI-X
[    4.450469] igb 0000:06:00.1: irq 94 for MSI/MSI-X
[    4.450552] igb 0000:06:00.1: irq 95 for MSI/MSI-X
[    4.450633] igb 0000:06:00.1: irq 96 for MSI/MSI-X
[    4.450713] igb 0000:06:00.1: irq 97 for MSI/MSI-X
[    4.450794] igb 0000:06:00.1: irq 98 for MSI/MSI-X
[    4.450844] igb 0000:06:00.1: irq 99 for MSI/MSI-X
[    4.450926] igb 0000:06:00.1: irq 100 for MSI/MSI-X
[    4.451752] igb 0000:06:00.1: irq 92 for MSI/MSI-X
[    4.451856] igb 0000:06:00.1: irq 93 for MSI/MSI-X
[    4.451955] igb 0000:06:00.1: irq 94 for MSI/MSI-X
[    4.452121] igb 0000:06:00.1: irq 95 for MSI/MSI-X
[    4.452222] igb 0000:06:00.1: irq 96 for MSI/MSI-X
[    4.452369] igb 0000:06:00.1: irq 97 for MSI/MSI-X
[    4.452615] igb 0000:06:00.1: irq 98 for MSI/MSI-X
[    4.452756] igb 0000:06:00.1: irq 99 for MSI/MSI-X
[    4.452908] igb 0000:06:00.1: irq 100 for MSI/MSI-X
[    4.486059] mpt3sas0: Allocated physical memory: size(8117 kB)
[    4.486059] mpt3sas0: Current Controller Queue Depth(2811),Max Controller Queue Depth(3072)
[    4.486059] mpt3sas0: Scatter Gather Elements per IO(128)
[    4.490652] Console: switching to colour frame buffer device 240x67
[    4.513988] mpt3sas0: LSISAS3008: FWVersion(05.00.00.00), ChipRevision(0x02), BiosVersion(08.11.00.00)
[    4.513989] mpt3sas0: Protocol=(
[    4.513989] Initiator
[    4.513989] ,Target
[    4.513990] ),
[    4.513990] Capabilities=(
[    4.513990] TLR
[    4.513991] ,EEDP
[    4.513991] ,Snapshot Buffer
[    4.513992] ,Diag Trace Buffer
[    4.513992] ,Task Set Full
[    4.513992] ,NCQ
[    4.513992] )
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
This is from Ubontu (Part 4 of 5)

Code:
[    4.514164] mpt3sas0: sending port enable !!
[    4.519351] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.520723] mpt3sas0: host_add: handle(0x0001), sas_addr(0x5003048011dabc00), phys(8)
[    4.526530] mpt3sas0: expander_add: handle(0x0009), parent(0x0001), sas_addr(0x50030480013c1c7f), phys(30)
[    4.544452] ast 0000:09:00.0: fb0: astdrmfb frame buffer device
[    4.544453] ast 0000:09:00.0: registered panic notifier
[    4.544455] [drm] Initialized ast 0.1.0 20120228 for 0000:09:00.0 on minor 0
[    4.559246] mpt3sas0: port enable: SUCCESS
[    4.559674] igb 0000:06:00.1: added PHC on eth1
[    4.559675] igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
[    4.559677] igb 0000:06:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:31:ad:95
[    4.559793] igb 0000:06:00.1: eth1: PBA No: 050B00-000
[    4.559794] igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    4.560426] scsi 0:0:0:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.560429] scsi 0:0:0:0: SATA: handle(0x000a), sas_addr(0x50030480013c1c6c), phy(12), device_name(0x50014ee20a8e5f9e)
[    4.560430] scsi 0:0:0:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(0)
[    4.560473] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.560474] scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.561034] igb 0000:06:00.2: irq 101 for MSI/MSI-X
[    4.561038] igb 0000:06:00.2: irq 102 for MSI/MSI-X
[    4.561052] igb 0000:06:00.2: irq 103 for MSI/MSI-X
[    4.561056] igb 0000:06:00.2: irq 104 for MSI/MSI-X
[    4.561060] igb 0000:06:00.2: irq 105 for MSI/MSI-X
[    4.561074] igb 0000:06:00.2: irq 106 for MSI/MSI-X
[    4.561078] igb 0000:06:00.2: irq 107 for MSI/MSI-X
[    4.561082] igb 0000:06:00.2: irq 108 for MSI/MSI-X
[    4.561097] igb 0000:06:00.2: irq 109 for MSI/MSI-X
[    4.561419] igb 0000:06:00.2: irq 101 for MSI/MSI-X
[    4.561423] igb 0000:06:00.2: irq 102 for MSI/MSI-X
[    4.561437] igb 0000:06:00.2: irq 103 for MSI/MSI-X
[    4.561441] igb 0000:06:00.2: irq 104 for MSI/MSI-X
[    4.561445] igb 0000:06:00.2: irq 105 for MSI/MSI-X
[    4.561460] igb 0000:06:00.2: irq 106 for MSI/MSI-X
[    4.561464] igb 0000:06:00.2: irq 107 for MSI/MSI-X
[    4.561467] igb 0000:06:00.2: irq 108 for MSI/MSI-X
[    4.561482] igb 0000:06:00.2: irq 109 for MSI/MSI-X
[    4.561660] scsi 0:0:1:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.561661] scsi 0:0:1:0: SATA: handle(0x000b), sas_addr(0x50030480013c1c6d), phy(13), device_name(0x50014ee2b5397b7c)
[    4.561662] scsi 0:0:1:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(1)
[    4.561704] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.561705] scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.562860] scsi 0:0:2:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.562861] scsi 0:0:2:0: SATA: handle(0x000c), sas_addr(0x50030480013c1c6e), phy(14), device_name(0x50014ee2b5396b8e)
[    4.562862] scsi 0:0:2:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(2)
[    4.562905] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.562906] scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.564053] scsi 0:0:3:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.564054] scsi 0:0:3:0: SATA: handle(0x000d), sas_addr(0x50030480013c1c6f), phy(15), device_name(0x50014ee25fe34697)
[    4.564055] scsi 0:0:3:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(3)
[    4.564097] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.564098] scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.565235] scsi 0:0:4:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.565237] scsi 0:0:4:0: SATA: handle(0x000e), sas_addr(0x50030480013c1c70), phy(16), device_name(0x50014ee25fe34c86)
[    4.565238] scsi 0:0:4:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(4)
[    4.565280] scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.565281] scsi 0:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.566414] scsi 0:0:5:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.566416] scsi 0:0:5:0: SATA: handle(0x000f), sas_addr(0x50030480013c1c71), phy(17), device_name(0x50014ee20a8df1f9)
[    4.566416] scsi 0:0:5:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(5)
[    4.566458] scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.566459] scsi 0:0:5:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.567591] scsi 0:0:6:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.567593] scsi 0:0:6:0: SATA: handle(0x0010), sas_addr(0x50030480013c1c72), phy(18), device_name(0x50014ee25fe369ba)
[    4.567593] scsi 0:0:6:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(6)
[    4.567636] scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.567637] scsi 0:0:6:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.568805] scsi 0:0:7:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.568807] scsi 0:0:7:0: SATA: handle(0x0011), sas_addr(0x50030480013c1c73), phy(19), device_name(0x50014ee25fe346a6)
[    4.568808] scsi 0:0:7:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(7)
[    4.568850] scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.568851] scsi 0:0:7:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.569987] scsi 0:0:8:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.569989] scsi 0:0:8:0: SATA: handle(0x0012), sas_addr(0x50030480013c1c74), phy(20), device_name(0x50014ee20a8e4929)
[    4.569990] scsi 0:0:8:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(8)
[    4.570031] scsi 0:0:8:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.570032] scsi 0:0:8:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.571178] scsi 0:0:9:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.571179] scsi 0:0:9:0: SATA: handle(0x0013), sas_addr(0x50030480013c1c75), phy(21), device_name(0x50014ee2b5391474)
[    4.571180] scsi 0:0:9:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(9)
[    4.571222] scsi 0:0:9:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.571223] scsi 0:0:9:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.572374] scsi 0:0:10:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.572375] scsi 0:0:10:0: SATA: handle(0x0014), sas_addr(0x50030480013c1c76), phy(22), device_name(0x50014ee25fe3a5a6)
[    4.572376] scsi 0:0:10:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(10)
[    4.572418] scsi 0:0:10:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.572419] scsi 0:0:10:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.573579] scsi 0:0:11:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 6
[    4.573581] scsi 0:0:11:0: SATA: handle(0x0015), sas_addr(0x50030480013c1c77), phy(23), device_name(0x50014ee2b53df72c)
[    4.573582] scsi 0:0:11:0: SATA: enclosure_logical_id(0x50030480013c1c7f), slot(11)
[    4.573624] scsi 0:0:11:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[    4.573625] scsi 0:0:11:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[    4.574041] scsi 0:0:12:0: Enclosure         LSI CORP SAS2X28          0717 PQ: 0 ANSI: 5
[    4.574043] scsi 0:0:12:0: SSP: handle(0x0016), sas_addr(0x50030480013c1c7d), phy(28), device_name(0x50030480013c1c7d)
[    4.574044] scsi 0:0:12:0: SSP: enclosure_logical_id(0x50030480013c1c7f), slot(0)
[    4.574045] scsi 0:0:12:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
[    4.575329] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.575435] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    4.575549] sd 0:0:2:0: Attached scsi generic sg2 type 0
[    4.575653] sd 0:0:3:0: Attached scsi generic sg3 type 0
[    4.575746] sd 0:0:4:0: Attached scsi generic sg4 type 0
[    4.575837] sd 0:0:5:0: Attached scsi generic sg5 type 0
[    4.575935] sd 0:0:6:0: Attached scsi generic sg6 type 0
[    4.576027] sd 0:0:7:0: Attached scsi generic sg7 type 0
[    4.576044] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.576045] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.576121] sd 0:0:8:0: Attached scsi generic sg8 type 0
[    4.576213] sd 0:0:9:0: Attached scsi generic sg9 type 0
[    4.576309] sd 0:0:10:0: Attached scsi generic sg10 type 0
[    4.576323] sd 0:0:1:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.576324] sd 0:0:1:0: [sdb] 4096-byte physical blocks
[    4.576402] sd 0:0:11:0: Attached scsi generic sg11 type 0
[    4.576476] scsi 0:0:12:0: Attached scsi generic sg12 type 13
[    4.576597] sd 0:0:2:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.576598] sd 0:0:2:0: [sdc] 4096-byte physical blocks
[    4.577176] sd 0:0:3:0: [sdd] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577177] sd 0:0:3:0: [sdd] 4096-byte physical blocks
[    4.577198] sd 0:0:6:0: [sdg] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577199] sd 0:0:6:0: [sdg] 4096-byte physical blocks
[    4.577434] sd 0:0:4:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577435] sd 0:0:4:0: [sde] 4096-byte physical blocks
[    4.577529] sd 0:0:7:0: [sdh] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577530] sd 0:0:7:0: [sdh] 4096-byte physical blocks
[    4.577700] sd 0:0:5:0: [sdf] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577701] sd 0:0:5:0: [sdf] 4096-byte physical blocks
[    4.577757] sd 0:0:9:0: [sdj] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577758] sd 0:0:9:0: [sdj] 4096-byte physical blocks
[    4.577943] sd 0:0:8:0: [sdi] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.577943] sd 0:0:8:0: [sdi] 4096-byte physical blocks
[    4.578000] sd 0:0:10:0: [sdk] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.578000] sd 0:0:10:0: [sdk] 4096-byte physical blocks
[    4.578193] sd 0:0:11:0: [sdl] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
[    4.578194] sd 0:0:11:0: [sdl] 4096-byte physical blocks
[    4.584054] sd 0:0:2:0: [sdc] Write Protect is off
[    4.584055] sd 0:0:2:0: [sdc] Mode Sense: 9b 00 10 08
[    4.584222] sd 0:0:0:0: [sda] Write Protect is off
[    4.584223] sd 0:0:0:0: [sda] Mode Sense: 9b 00 10 08
[    4.584532] sd 0:0:3:0: [sdd] Write Protect is off
[    4.584533] sd 0:0:3:0: [sdd] Mode Sense: 9b 00 10 08
[    4.584560] sd 0:0:6:0: [sdg] Write Protect is off
[    4.584561] sd 0:0:6:0: [sdg] Mode Sense: 9b 00 10 08
[    4.584721] sd 0:0:1:0: [sdb] Write Protect is off
[    4.584722] sd 0:0:1:0: [sdb] Mode Sense: 9b 00 10 08
[    4.584886] sd 0:0:4:0: [sde] Write Protect is off
[    4.584887] sd 0:0:4:0: [sde] Mode Sense: 9b 00 10 08
[    4.585026] sd 0:0:7:0: [sdh] Write Protect is off
[    4.585027] sd 0:0:7:0: [sdh] Mode Sense: 9b 00 10 08
[    4.585057] sd 0:0:5:0: [sdf] Write Protect is off
[    4.585058] sd 0:0:5:0: [sdf] Mode Sense: 9b 00 10 08
[    4.585079] sd 0:0:8:0: [sdi] Write Protect is off
[    4.585080] sd 0:0:8:0: [sdi] Mode Sense: 9b 00 10 08
[    4.585263] sd 0:0:9:0: [sdj] Write Protect is off
[    4.585264] sd 0:0:9:0: [sdj] Mode Sense: 9b 00 10 08
[    4.585517] sd 0:0:11:0: [sdl] Write Protect is off
[    4.585518] sd 0:0:11:0: [sdl] Mode Sense: 9b 00 10 08
[    4.585544] sd 0:0:10:0: [sdk] Write Protect is off
[    4.585545] sd 0:0:10:0: [sdk] Mode Sense: 9b 00 10 08
[    4.585683] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.585933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.586367] sd 0:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.586394] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.586783] sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.586805] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.587202] sd 0:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.587493] sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.587516] sd 0:0:8:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.587538] sd 0:0:9:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.587982] sd 0:0:10:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.588292] sd 0:0:11:0: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.602496]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    4.602832] random: nonblocking pool is initialized
[    4.610841] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.636724]  sdk: sdk1 sdk2 sdk3 sdk4 sdk5 sdk6 sdk7 sdk8
[    4.636727]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8
[    4.636745]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8
[    4.636775]  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8
[    4.636789]  sdj: sdj1 sdj2 sdj3 sdj4 sdj5 sdj6 sdj7 sdj8
[    4.636989]  sdg: sdg1 sdg2 sdg3 sdg4 sdg5 sdg6 sdg7 sdg8
[    4.638965]  sdl: sdl1 sdl2 sdl3 sdl4 sdl5 sdl6 sdl7 sdl8
[    4.638968]  sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8
[    4.640171]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[    4.641406]  sdi: sdi1 sdi2 sdi3 sdi4 sdi5 sdi6 sdi7 sdi8
[    4.642216]  sdh: sdh1 sdh2 sdh3 sdh4 sdh5 sdh6 sdh7 sdh8
[    4.647941] sd 0:0:5:0: [sdf] Attached SCSI disk
[    4.648558] sd 0:0:4:0: [sde] Attached SCSI disk
[    4.648958] sd 0:0:3:0: [sdd] Attached SCSI disk
[    4.649048] sd 0:0:6:0: [sdg] Attached SCSI disk
[    4.649253] sd 0:0:10:0: [sdk] Attached SCSI disk
[    4.649540] sd 0:0:9:0: [sdj] Attached SCSI disk
[    4.649626] sd 0:0:2:0: [sdc] Attached SCSI disk
[    4.649890] sd 0:0:11:0: [sdl] Attached SCSI disk
[    4.650409] sd 0:0:1:0: [sdb] Attached SCSI disk
[    4.651017] sd 0:0:8:0: [sdi] Attached SCSI disk
[    4.651185] sd 0:0:7:0: [sdh] Attached SCSI disk
[    4.655730] usb 1-1: New USB device found, idVendor=8087, idProduct=800a
[    4.655732] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.655771] igb 0000:06:00.2: added PHC on eth2
[    4.655772] igb 0000:06:00.2: Intel(R) Gigabit Ethernet Network Connection
[    4.655773] igb 0000:06:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:31:ad:96
[    4.655867] hub 1-1:1.0: USB hub found
[    4.655915] igb 0000:06:00.2: eth2: PBA No: 050B00-000
[    4.655917] igb 0000:06:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    4.655968] hub 1-1:1.0: 6 ports detected
[    4.657215] igb 0000:06:00.3: irq 110 for MSI/MSI-X
[    4.657221] igb 0000:06:00.3: irq 111 for MSI/MSI-X
[    4.657233] igb 0000:06:00.3: irq 112 for MSI/MSI-X
[    4.657238] igb 0000:06:00.3: irq 113 for MSI/MSI-X
[    4.657243] igb 0000:06:00.3: irq 114 for MSI/MSI-X
[    4.657257] igb 0000:06:00.3: irq 115 for MSI/MSI-X
[    4.657262] igb 0000:06:00.3: irq 116 for MSI/MSI-X
[    4.657267] igb 0000:06:00.3: irq 117 for MSI/MSI-X
[    4.657281] igb 0000:06:00.3: irq 118 for MSI/MSI-X
[    4.657796] igb 0000:06:00.3: irq 110 for MSI/MSI-X
[    4.657801] igb 0000:06:00.3: irq 111 for MSI/MSI-X
[    4.657814] igb 0000:06:00.3: irq 112 for MSI/MSI-X
[    4.657819] igb 0000:06:00.3: irq 113 for MSI/MSI-X
[    4.657824] igb 0000:06:00.3: irq 114 for MSI/MSI-X
[    4.657837] igb 0000:06:00.3: irq 115 for MSI/MSI-X
[    4.657842] igb 0000:06:00.3: irq 116 for MSI/MSI-X
[    4.657846] igb 0000:06:00.3: irq 117 for MSI/MSI-X
[    4.657861] igb 0000:06:00.3: irq 118 for MSI/MSI-X
[    4.703463] ata3: SATA link down (SStatus 0 SControl 300)
[    4.703485] ata2: SATA link down (SStatus 0 SControl 300)
[    4.703502] ata1: SATA link down (SStatus 0 SControl 300)
[    4.703519] ata4: SATA link down (SStatus 0 SControl 300)
[    4.743524] ata6: SATA link down (SStatus 0 SControl 300)
[    4.743544] ata8: SATA link down (SStatus 0 SControl 300)
[    4.743563] ata10: SATA link down (SStatus 0 SControl 300)
[    4.743579] ata7: SATA link down (SStatus 0 SControl 300)
[    4.743595] ata5: SATA link down (SStatus 0 SControl 300)
[    4.743612] ata9: SATA link down (SStatus 0 SControl 300)
[    4.748205] igb 0000:06:00.3: added PHC on eth3
[    4.748207] igb 0000:06:00.3: Intel(R) Gigabit Ethernet Network Connection
[    4.748209] igb 0000:06:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:31:ad:97
[    4.748347] igb 0000:06:00.3: eth3: PBA No: 050B00-000
[    4.748349] igb 0000:06:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    4.771551] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.912090] usb 2-1: New USB device found, idVendor=8087, idProduct=8002
[    4.912092] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.912232] hub 2-1:1.0: USB hub found
[    4.912338] hub 2-1:1.0: 8 ports detected
[    5.027926] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    5.054282] usb 3-1: New USB device found, idVendor=1241, idProduct=1166
[    5.054283] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.054338] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    5.128123] Switched to clocksource tsc
[    5.168128] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[    5.190979] usb 3-2: New USB device found, idVendor=045e, idProduct=00f9
[    5.190980] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.190981] usb 3-2: Product: Microsoft Wireless Desktop Receiver 3.1
[    5.190982] usb 3-2: Manufacturer: Microsft
[    5.191027] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    5.191029] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
This is from Ubontu (Part 5 of 5)

Code:
[    5.236162] hidraw: raw HID events driver (C) Jiri Kosina
[    5.259649] usbcore: registered new interface driver usbhid
[    5.259650] usbhid: USB HID core driver
[    5.260498] input: HID 1241:1166 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input2
[    5.260513] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input3
[    5.260566] hid-generic 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:14.0-1/input0
[    5.260589] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:14.0-2/input0
[    5.260595] microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[    5.265944] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input4
[    5.265993] microsoft 0003:045E:00F9.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:14.0-2/input1
[    5.277231] ses 0:0:12:0: Attached Enclosure device
[    5.360407] usb 3-6: new high-speed USB device number 4 using xhci_hcd
[    5.377019] usb 3-6: New USB device found, idVendor=0781, idProduct=5406
[    5.377021] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.377022] usb 3-6: Product: U3 Cruzer Micro
[    5.377023] usb 3-6: Manufacturer: SanDisk
[    5.377023] usb 3-6: SerialNumber: 0266201B84433CB7
[    5.378673] usb-storage 3-6:1.0: USB Mass Storage device detected
[    5.378705] scsi11 : usb-storage 3-6:1.0
[    5.378737] usbcore: registered new interface driver usb-storage
[    5.492657] usb 3-12: new high-speed USB device number 5 using xhci_hcd
[    5.508929] usb 3-12: New USB device found, idVendor=0557, idProduct=7000
[    5.508930] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.509106] hub 3-12:1.0: USB hub found
[    5.509192] hub 3-12:1.0: 4 ports detected
[    5.801259] usb 3-12.1: new low-speed USB device number 6 using xhci_hcd
[    5.829690] usb 3-12.1: New USB device found, idVendor=0557, idProduct=2419
[    5.829691] usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.829800] usb 3-12.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    5.829803] usb 3-12.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
[    5.830568] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/input/input5
[    5.830612] hid-generic 0003:0557:2419.0004: input,hidraw3: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0
[    5.833136] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/input/input6
[    5.833186] hid-generic 0003:0557:2419.0005: input,hidraw4: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1
[    5.841408] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[    5.860500] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.378438] scsi 11:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
[    6.378628] sd 11:0:0:0: Attached scsi generic sg13 type 0
[    6.379150] sd 11:0:0:0: [sdm] 31355391 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    6.379475] sd 11:0:0:0: [sdm] Write Protect is off
[    6.379477] sd 11:0:0:0: [sdm] Mode Sense: 45 00 00 08
[    6.379848] sd 11:0:0:0: [sdm] No Caching mode page found
[    6.379849] sd 11:0:0:0: [sdm] Assuming drive cache: write through
[    6.379956] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[    6.382061] sd 11:0:0:0: [sdm] No Caching mode page found
[    6.382063] sd 11:0:0:0: [sdm] Assuming drive cache: write through
[    6.385968]  sdm: sdm1
[    6.388795] sd 11:0:0:0: [sdm] No Caching mode page found
[    6.388797] sd 11:0:0:0: [sdm] Assuming drive cache: write through
[    6.388798] sd 11:0:0:0: [sdm] Attached SCSI removable disk
[    6.402107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.556662] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    6.643165] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[    6.687069] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.719017] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[    6.761228] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    6.876059] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[    6.953316] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
[    6.984972] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    7.011129] EXT4-fs (sdc2): mounting ext3 file system using the ext4 subsystem
[    7.050755] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[    7.189845] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
[    7.262275] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[    7.305172] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    7.396930] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[    7.436117] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[    7.528207] EXT4-fs (sdf1): mounting ext3 file system using the ext4 subsystem
[    7.583033] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[    7.677406] EXT4-fs (sdg1): mounting ext3 file system using the ext4 subsystem
[    7.696238] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
[    7.793357] EXT4-fs (sdh1): mounting ext3 file system using the ext4 subsystem
[    7.844215] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
[    7.872291] EXT4-fs (sdh2): mounting ext3 file system using the ext4 subsystem
[    7.912946] EXT4-fs (sdh2): mounted filesystem with ordered data mode. Opts: (null)
[    8.052120] EXT4-fs (sdh4): mounted filesystem with ordered data mode. Opts: (null)
[    8.126476] EXT4-fs (sdi1): mounting ext3 file system using the ext4 subsystem
[    8.172874] EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
[    8.269843] EXT4-fs (sdj1): mounting ext3 file system using the ext4 subsystem
[    8.292033] EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
[    8.393627] EXT4-fs (sdk1): mounting ext3 file system using the ext4 subsystem
[    8.413490] EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null)
[    8.509344] EXT4-fs (sdl1): mounting ext3 file system using the ext4 subsystem
[    8.557498] EXT4-fs (sdl1): mounted filesystem with ordered data mode. Opts: (null)
[   10.874948] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   15.818196] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.818202] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   15.818205] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   15.818209] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   15.922916] systemd-udevd[3593]: starting version 204
[   16.074931] lp: driver loaded but no devices found
[   16.095436] ppdev: user-space parallel port driver
[   16.140842] IPMI System Interface driver.
[   16.140910] ipmi_si: probing via ACPI
[   16.140933] ipmi_si 00:0a: [io  0x0ca2] regsize 1 spacing 1 irq 0
[   16.140935] ipmi_si: Adding ACPI-specified kcs state machine
[   16.140945] ipmi_si: probing via SMBIOS
[   16.140946] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[   16.140946] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[   16.140948] ipmi_si: Bad SPMI legacy 0
[   16.140949] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[   16.169741] init: cups main process (3635) killed by HUP signal
[   16.169747] init: cups main process ended, respawning
[   16.221080] ioatdma: Intel(R) QuickData Technology Driver 4.00
[   16.221222] ioatdma 0000:00:04.0: irq 119 for MSI/MSI-X
[   16.221313] ------------[ cut here ]------------
[   16.221317] WARNING: CPU: 1 PID: 3680 at /build/buildd/linux-3.13.0/drivers/dma/ioat/dca.c:697 ioat3_dca_init+0x19c/0x1b0 [ioatdma]()
[   16.221318] ioatdma 0000:00:04.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA
[   16.221319] Modules linked in: ioatdma(+) ghash_clmulni_intel(+) cryptd acpi_power_meter(+) acpi_pad mac_hid ipmi_si(+) parport_pc ppdev lp parport squashfs overlayfs nls_iso8859_1 dm_mirror dm_region_hash dm_log usb_storage hid_microsoft hid_generic usbhid hid ses enclosure ast syscopyarea sysfillrect sysimgblt ttm igb drm_kms_helper mpt3sas drm dca ptp ahci raid_class pps_core libahci scsi_transport_sas i2c_algo_bit wmi
[   16.221332] CPU: 1 PID: 3680 Comm: systemd-udevd Not tainted 3.13.0-32-generic #57-Ubuntu
[   16.221332] Hardware name: Supermicro X10SRH/X10SRH-CLN4F, BIOS 1.0a 09/19/2014
[   16.221333]  000000000000000b ffff88101ec5ba50 ffffffff8171bcb4 ffff88101ec5ba98
[   16.221335]  ffff88101ec5ba88 ffffffff810676cd ffff881027d3f420 ffff881027da5000
[   16.221337]  ffff88101f04c800 ffffc900062f8100 0000000000000100 ffff88101ec5bae8
[   16.221338] Call Trace:
[   16.221343]  [<ffffffff8171bcb4>] dump_stack+0x45/0x56
[   16.221346]  [<ffffffff810676cd>] warn_slowpath_common+0x7d/0xa0
[   16.221347]  [<ffffffff81067784>] warn_slowpath_fmt_taint+0x44/0x50
[   16.221350]  [<ffffffffa02359bc>] ioat3_dca_init+0x19c/0x1b0 [ioatdma]
[   16.221353]  [<ffffffffa0234dd6>] ioat3_dma_probe+0x3a6/0x400 [ioatdma]
[   16.221356]  [<ffffffff813a176d>] ? __pci_set_master+0x2d/0xd0
[   16.221358]  [<ffffffffa022d192>] ioat_pci_probe+0x122/0x1b0 [ioatdma]
[   16.221360]  [<ffffffff813a61e5>] local_pci_probe+0x45/0xa0
[   16.221362]  [<ffffffff813a7485>] ? pci_match_device+0xc5/0xd0
[   16.221364]  [<ffffffff813a75a9>] pci_device_probe+0xd9/0x130
[   16.221366]  [<ffffffff8149355d>] driver_probe_device+0x12d/0x3e0
[   16.221367]  [<ffffffff814938e3>] __driver_attach+0x93/0xa0
[   16.221369]  [<ffffffff81493850>] ? __device_attach+0x40/0x40
[   16.221372]  [<ffffffff814914c3>] bus_for_each_dev+0x63/0xa0
[   16.221373]  [<ffffffff81492f0e>] driver_attach+0x1e/0x20
[   16.221374]  [<ffffffff81492af0>] bus_add_driver+0x180/0x250
[   16.221376]  [<ffffffffa0243000>] ? 0xffffffffa0242fff
[   16.221377]  [<ffffffff81493f64>] driver_register+0x64/0xf0
[   16.221378]  [<ffffffffa0243000>] ? 0xffffffffa0242fff
[   16.221380]  [<ffffffff813a5b7c>] __pci_register_driver+0x4c/0x50
[   16.221382]  [<ffffffffa0243089>] ioat_init_module+0x89/0x1000 [ioatdma]
[   16.221385]  [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0
[   16.221388]  [<ffffffff810598d3>] ? set_memory_nx+0x43/0x50
[   16.221390]  [<ffffffff810e1f8d>] load_module+0x12dd/0x1b40
[   16.221393]  [<ffffffff810dda30>] ? store_uevent+0x40/0x40
[   16.221394]  [<ffffffff810e2966>] SyS_finit_module+0x86/0xb0
[   16.221397]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[   16.221398] ---[ end trace 5d981cd08902bcec ]---
[   16.221478] ioatdma 0000:00:04.1: irq 120 for MSI/MSI-X
[   16.221635] ioatdma 0000:00:04.2: irq 121 for MSI/MSI-X
[   16.221775] ioatdma 0000:00:04.3: irq 122 for MSI/MSI-X
[   16.221912] ioatdma 0000:00:04.4: irq 123 for MSI/MSI-X
[   16.222049] ioatdma 0000:00:04.5: irq 124 for MSI/MSI-X
[   16.222185] ioatdma 0000:00:04.6: irq 125 for MSI/MSI-X
[   16.222335] ioatdma 0000:00:04.7: irq 126 for MSI/MSI-X
[   16.242364] Bluetooth: Core ver 2.17
[   16.242378] NET: Registered protocol family 31
[   16.242379] Bluetooth: HCI device and connection manager initialized
[   16.242386] Bluetooth: HCI socket layer initialized
[   16.242388] Bluetooth: L2CAP socket layer initialized
[   16.242391] Bluetooth: SCO socket layer initialized
[   16.245638] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.247988] ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c, prod_id: 0x0838, dev_id: 0x20)
[   16.247992] ipmi_si 00:0a: IPMI kcs interface initialized
[   16.269620] Bluetooth: RFCOMM TTY layer initialized
[   16.269627] Bluetooth: RFCOMM socket layer initialized
[   16.269630] Bluetooth: RFCOMM ver 1.11
[   16.288249] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[   16.288251] mei_me 0000:00:16.0: initialization failed.
[   16.299738] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20131115/utaddress-251)
[   16.299744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.299747] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
[   16.299750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.299769] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.300660] power_meter ACPI000D:00: Found ACPI power meter.
[   16.300682] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[   16.325621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.325623] Bluetooth: BNEP filters: protocol multicast
[   16.325630] Bluetooth: BNEP socket layer initialized
[   16.413176] device-mapper: multipath: version 1.6.0 loaded
[   16.716238] init: failsafe main process (4115) killed by TERM signal
[   17.383108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.383361] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.487270] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.487513] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.583441] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   17.583667] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   17.687672] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   17.687881] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   18.682497] init: plymouth-upstart-bridge main process ended, respawning
[   18.689699] init: plymouth-upstart-bridge main process (4870) terminated with status 1
[   18.689706] init: plymouth-upstart-bridge main process ended, respawning
[   21.296283] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   21.296494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
depasseg said:
my last da12-ish device was boot, but it was also USB. the dmesg output displays a later da device in AltecBX's as well, so I'm guessing that is his boot device.

I found this in your dmesg:
Code:
ses0: pass1,da0: Element descriptor: 'Slot 02'
ses0: pass1,da0: SAS Device Slot Element: 1 Phys at Slot 1
ses0:  phy 0: SATA device
ses0:  phy 0: parent 50030480013c1c7f addr 50030480013c1c6d
ses0: pass2,da1: Element descriptor: 'Slot 03'
ses0: pass2,da1: SAS Device Slot Element: 1 Phys at Slot 2
ses0:  phy 0: SATA device
ses0:  phy 0: parent 50030480013c1c7f addr 50030480013c1c6e


This is your enclosure reporting it is starting to count the descriptors at "slot 02" (for phys slot 1). FN might be interpreting the enclosure itself as a device instead of the 1st drive. try popping out all the drives except the 1st one (lower left) and check to see if you have a drive in freenas. (and post dmesg)
Click to expand...
I think you might be on to something. I'm trying that now.
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
This is FreeNAS with only drive 0 (lower left on chassis) installed. I saw the drive get detected on boot-up but I don't see it on FreeNAS. Depasseg I think you caught the problem!

Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.12.07 22:54:20 =~=~=~=~=~=~=~=~=~=~=~=
login as: root
root@192.168.1.44's password:
FreeBSD 9.2-RELEASE-p15 (FREENAS.amd64) #0 r262572+5b7d179: Mon Nov 17 16:27:51 PST 2014

    FreeNAS (c) 2009-2014, The FreeNAS Development Team
    All rights reserved.
    FreeNAS is released under the modified BSD license.

    For more information, documentation, help or support, go here:
     http://freenas.org
Welcome to FreeNAS
]0;root@freenas:~[[1mroot@freenas[m] [1m~[m# dmesg

Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE-p15 #0 r262572+5b7d179: Mon Nov 17 16:27:51 PST 2014
    root@build3.ixsystems.com:/tank/home/jkh/build/921/FN/os-base/amd64/fusion/jkh/921/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU E5-1650 v3 @ 3.50GHz (3500.08-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306f2  Family = 0x6  Model = 0x3f  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7dfefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Standard Extended Features=0x37ab<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID>
  TSC: P-state invariant, performance statistics
real memory  = 68719476736 (65536 MB)
avail memory = 66297565184 (63226 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  2
cpu3 (AP): APIC ID:  3
cpu4 (AP): APIC ID:  4
cpu5 (AP): APIC ID:  5
cpu6 (AP): APIC ID:  6
cpu7 (AP): APIC ID:  7
cpu8 (AP): APIC ID:  8
cpu9 (AP): APIC ID:  9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Event timer "HPET7" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pci255: <base peripheral> at device 11.0 (no driver attached)
pci255: <dasp> at device 11.1 (no driver attached)
pci255: <dasp> at device 11.2 (no driver attached)
pci255: <base peripheral> at device 12.0 (no driver attached)
pci255: <base peripheral> at device 12.1 (no driver attached)
pci255: <base peripheral> at device 12.2 (no driver attached)
pci255: <base peripheral> at device 12.3 (no driver attached)
pci255: <base peripheral> at device 12.4 (no driver attached)
pci255: <base peripheral> at device 12.5 (no driver attached)
pci255: <base peripheral> at device 15.0 (no driver attached)
pci255: <base peripheral> at device 15.1 (no driver attached)
pci255: <base peripheral> at device 15.4 (no driver attached)
pci255: <base peripheral> at device 15.5 (no driver attached)
pci255: <base peripheral> at device 15.6 (no driver attached)
pci255: <base peripheral> at device 16.0 (no driver attached)
pci255: <dasp> at device 16.1 (no driver attached)
pci255: <base peripheral> at device 16.5 (no driver attached)
pci255: <dasp> at device 16.6 (no driver attached)
pci255: <base peripheral> at device 16.7 (no driver attached)
pci255: <base peripheral> at device 18.0 (no driver attached)
pci255: <dasp> at device 18.1 (no driver attached)
pci255: <base peripheral> at device 19.0 (no driver attached)
pci255: <base peripheral> at device 19.1 (no driver attached)
pci255: <base peripheral> at device 19.2 (no driver attached)
pci255: <base peripheral> at device 19.3 (no driver attached)
pci255: <base peripheral> at device 19.4 (no driver attached)
pci255: <base peripheral> at device 19.5 (no driver attached)
pci255: <base peripheral> at device 19.6 (no driver attached)
pci255: <base peripheral> at device 19.7 (no driver attached)
pci255: <base peripheral> at device 20.0 (no driver attached)
pci255: <base peripheral> at device 20.1 (no driver attached)
pci255: <base peripheral> at device 20.2 (no driver attached)
pci255: <base peripheral> at device 20.3 (no driver attached)
pci255: <base peripheral> at device 20.6 (no driver attached)
pci255: <base peripheral> at device 20.7 (no driver attached)
pci255: <base peripheral> at device 21.0 (no driver attached)
pci255: <base peripheral> at device 21.1 (no driver attached)
pci255: <base peripheral> at device 21.2 (no driver attached)
pci255: <base peripheral> at device 21.3 (no driver attached)
pci255: <base peripheral> at device 22.0 (no driver attached)
pci255: <base peripheral> at device 22.6 (no driver attached)
pci255: <base peripheral> at device 22.7 (no driver attached)
pci255: <base peripheral> at device 23.0 (no driver attached)
pci255: <base peripheral> at device 23.4 (no driver attached)
pci255: <base peripheral> at device 23.5 (no driver attached)
pci255: <base peripheral> at device 23.6 (no driver attached)
pci255: <base peripheral> at device 23.7 (no driver attached)
pci255: <base peripheral> at device 30.0 (no driver attached)
pci255: <base peripheral> at device 30.1 (no driver attached)
pci255: <base peripheral> at device 30.2 (no driver attached)
pci255: <base peripheral> at device 30.3 (no driver attached)
pci255: <base peripheral> at device 30.4 (no driver attached)
pci255: <base peripheral> at device 31.0 (no driver attached)
pci255: <base peripheral> at device 31.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib2
mpr0: <LSI SAS3008> port 0xe000-0xe0ff mem 0xfb200000-0xfb20ffff irq 26 at device 0.0 on pci1
mpr0: IOCFacts    :
    MsgVersion: 0x205
    HeaderVersion: 0x2100
    IOCNumber: 0
    IOCExceptions: 0x0
    MaxChainDepth: 128
    NumberOfPorts: 1
    RequestCredit: 3072
    ProductID: 0x2221
    IOCRequestFrameSize: 32
    MaxInitiators: 1
    MaxTargets: 256
    MaxSasExpanders: 48
    MaxEnclosures: 16
    HighPriorityCredit: 128
    MaxReplyDescriptorPostQueueDepth: 65504
    ReplyFrameSize: 32
    MaxVolumes: 0
    MaxDevHandle: 313
    MaxPersistentEntries: 128
mpr0: Firmware: 05.00.00.00, Driver: 05.255.05.00-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.2 on pci0
pci5: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 40 at device 3.3 on pci0
pci6: <ACPI PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd060-0xd07f mem 0xfb360000-0xfb37ffff,0xfb38c000-0xfb38ffff irq 43 at device 0.0 on pci6
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 0c:c4:7a:31:ad:94
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd040-0xd05f mem 0xfb340000-0xfb35ffff,0xfb388000-0xfb38bfff irq 44 at device 0.1 on pci6
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 0c:c4:7a:31:ad:95
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 0
igb1: Bound queue 5 to cpu 1
igb1: Bound queue 6 to cpu 2
igb1: Bound queue 7 to cpu 3
igb2: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd020-0xd03f mem 0xfb320000-0xfb33ffff,0xfb384000-0xfb387fff irq 46 at device 0.2 on pci6
igb2: Using MSIX interrupts with 9 vectors
igb2: Ethernet address: 0c:c4:7a:31:ad:96
igb2: Bound queue 0 to cpu 4
igb2: Bound queue 1 to cpu 5
igb2: Bound queue 2 to cpu 6
igb2: Bound queue 3 to cpu 7
igb2: Bound queue 4 to cpu 8
igb2: Bound queue 5 to cpu 9
igb2: Bound queue 6 to cpu 10
igb2: Bound queue 7 to cpu 11
igb3: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd000-0xd01f mem 0xfb300000-0xfb31ffff,0xfb380000-0xfb383fff irq 45 at device 0.3 on pci6
igb3: Using MSIX interrupts with 9 vectors
igb3: Ethernet address: 0c:c4:7a:31:ad:97
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: Bound queue 4 to cpu 4
igb3: Bound queue 5 to cpu 5
igb3: Bound queue 6 to cpu 6
igb3: Bound queue 7 to cpu 7
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.1 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
pci0: <base peripheral> at device 4.3 (no driver attached)
pci0: <base peripheral> at device 4.4 (no driver attached)
pci0: <base peripheral> at device 4.5 (no driver attached)
pci0: <base peripheral> at device 4.6 (no driver attached)
pci0: <base peripheral> at device 4.7 (no driver attached)
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.1 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb438000-0xfb4387ff irq 16 at device 17.4 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
pci0: <serial bus, USB> at device 20.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb434000-0xfb4343ff irq 18 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci8: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib10
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci9
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb433000-0xfb4333ff irq 18 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb432000-0xfb4327ff irq 16 at device 31.2 on pci0
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <dasp> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0xfffffe0009c3c040 with IPv6 initialized (100409)
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at mpr0 bus 0 scbus0 target 8 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
ses0: Serial Number
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 ENC Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
Swap zone entries reduced from 8118227 to 5412151.
Timecounter "TSC-low" frequency 1750038794 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x1241> at usbus1
ums0: <vendor 0x1241 product 0x1166, class 0/0, rev 1.10/2.70, addr 3> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
Root mount waiting for: usbus1 usbus0
ugen1.4: <Microsft> at usbus1
ukbd0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 4> on usbus1
kbd0 at ukbd0
ums1: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 4> on usbus1
ums1: 5 buttons and [XYZT] coordinates ID=17
ums1: 0 buttons and [ZT] coordinates ID=0
ugen0.3: <STT> at usbus0
umass0: <STT EXPRESS ST4, class 0/0, rev 2.10/0.00, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:12:0:-1: Attached to scbus12
da0 at umass-sim0 bus 0 scbus12 target 0 lun 0
da0: <STT EXPRESS ST4 0.00> Removable Direct Access SCSI-2 device
da0: Serial Number 231427000000156
da0: 40.000MB/s transfers
da0: 15000MB (30720000 512 byte sectors: 255H 63S/T 1912C)
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <vendor 0x0557> at usbus0
uhub4: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub4: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <vendor 0x0557> at usbus0
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
kbd2 at ukbd1
ums2: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
ums2: 3 buttons and [Z] coordinates ID=0
Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
vboxdrv: fAsync=0 offMin=0x22d offMax=0x11bd
]0;root@freenas:~[[1mroot@freenas[m] [1m~[m#
 
depasseg

depasseg

FreeNAS Replicant
Joined
Sep 16, 2014
Messages
2,874
try populating all slots except the first (lower left) and see if it acknowledges all 12 drives.
-Greg
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
So after having only 1 drive in (lower left) FreeNAS didn't show the drive. I started inserting one drive at a time until all 12 was in and I notice all drives are shown by FreeNAS except the first one.
Depasseg I think you solved the problem. I think that's where the problem lies. In the first slot in the chassis (lower left). FreeNAS doesn't read it but it reads all other drives. Other OS's can see all drives. So how do we get FreeNAS to see all drives?

Here's a pic:
a17mdd.jpg
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
depasseg said:
try populating all slots except the first (lower left) and see if it acknowledges all 12 drives.
-Greg
Click to expand...
Yep. That works. By leaving the lower left slot open(no drive) I can see all 12 drives. I notice that da0 is not showing anymore. Why?


9kz0j4.jpg
 
depasseg

depasseg

FreeNAS Replicant
Joined
Sep 16, 2014
Messages
2,874
It might be a setting in the 3008. there might be a way to detect the enclosure last, or assign a different id to it. Looking at the Ubuntu dmesg output (specifically #4 of 5), it uses a different driver and therefore appears to enumerate differently. So it could be a driver thing. Or an incompatibility between the 3008 and the enclosure. Any chance you have an M1015 SAS2 card you can try?
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
No I don't. This motherboard is the only SAS device I have.
 
depasseg

depasseg

FreeNAS Replicant
Joined
Sep 16, 2014
Messages
2,874
You can try supermicro support again. :smile: afterall, it's their MB and chassis.
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
I rebooted the machine. This is what I see now. da0 came back but the serial number is gone. WTF

2s93ds5.jpg
 
depasseg

depasseg

FreeNAS Replicant
Joined
Sep 16, 2014
Messages
2,874
Is the lower left slot still empty? Or did you put a drive in there?
I'd suggest leaving it empty until it gets resolved.
 
AltecBX

AltecBX

Patron
Joined
Nov 3, 2014
Messages
285
Yep. It's still empty. It looks like FreeNAS starts at da1 when drives are added will its running.
After reboot it started at da0 with serial number not displaying on da0.
With all this troubleshooting, I believe FreeNAS developers can work something out with this controller and it's drivers. NO? All other OS can see all drives in this chassis.
 
Status
Not open for further replies.

Similar threads

T
  • Locked
FreeNas as a storage for ESXi
Replies
4
Views
1K
Tenek
T
DarkMagus
  • Locked
BUILD Building FreeNas for Home with Plex
Replies
4
Views
1K
DarkMagus
DarkMagus
M
  • Locked
Should I get a motherboard with SAS3?
Replies
9
Views
4K
LIGISTX
LIGISTX
C
Building a 60 bay with FreeNAS
2
Replies
34
Views
9K
clueluzz
C
FreeNAS_Lover
  • Locked
Suggestion for ZFS Replication / Building a Backup Server (Automatic Backup Required)
Replies
5
Views
1K
jgreco
jgreco
Top