I maybe jumping the gun here posting to the forum as I can see from other posts there seems to be some issues with the plugin downloads through the gui but the posted workarounds don't seem to be working for me and known good plugins just refuse to work so I'm posting just as a sanity check.
OK so followed a couple of guides 1 2 on getting BTSync up and running have had no success just keep getting the following errors;
May 20 07:53:45 freenas manage.py: [freeadmin.navtree:526] Couldn't retrieve http://10.1.0.11/plugins/transmission/1/_s/treemenu: timed out
May 20 07:53:45 freenas manage.py: [freeadmin.navtree:526] Couldn't retrieve http://10.1.0.11/plugins/btsync/2/_s/treemenu: timed out
May 20 07:55:04 freenas manage.py: [plugins.utils:92] Couldn't retrieve http://10.1.0.11/plugins/transmission/1/_s/status: HTTP Error 504: Gateway Time-out
May 20 07:55:04 freenas manage.py: [plugins.utils:92] Couldn't retrieve http://10.1.0.11/plugins/btsync/2/_s/status: HTTP Error 504: Gateway Time-out
As you can see also getting the same error with transmission.
I have also tried to create a standalone BTSync jail as per this guide, in both cases I get minimal errors at /var/log/messages on freenas just what's above, what I did notice was 'service btsync start' brought back that btsync wasn't defined in /etc/rc.d/ or local user.
And after a flattening the config db and redeploying the plugin via upload plugin I now get,
Will not 'start' btsync because btsync_enable is NO. And nothing auto starts but the jails are up and running.
as FYI btsync is user and group with ID817, the jail was created by installing transmission and letting it create it.
So can anyone kick me in the right direction, it maybe a total noob issue as it got to be 4 years since I last played with freenas and it feels very unfamiliar now :)
Regards
Dave
OK so followed a couple of guides 1 2 on getting BTSync up and running have had no success just keep getting the following errors;
May 20 07:53:45 freenas manage.py: [freeadmin.navtree:526] Couldn't retrieve http://10.1.0.11/plugins/transmission/1/_s/treemenu: timed out
May 20 07:53:45 freenas manage.py: [freeadmin.navtree:526] Couldn't retrieve http://10.1.0.11/plugins/btsync/2/_s/treemenu: timed out
May 20 07:55:04 freenas manage.py: [plugins.utils:92] Couldn't retrieve http://10.1.0.11/plugins/transmission/1/_s/status: HTTP Error 504: Gateway Time-out
May 20 07:55:04 freenas manage.py: [plugins.utils:92] Couldn't retrieve http://10.1.0.11/plugins/btsync/2/_s/status: HTTP Error 504: Gateway Time-out
As you can see also getting the same error with transmission.
I have also tried to create a standalone BTSync jail as per this guide, in both cases I get minimal errors at /var/log/messages on freenas just what's above, what I did notice was 'service btsync start' brought back that btsync wasn't defined in /etc/rc.d/ or local user.
And after a flattening the config db and redeploying the plugin via upload plugin I now get,
Will not 'start' btsync because btsync_enable is NO. And nothing auto starts but the jails are up and running.
as FYI btsync is user and group with ID817, the jail was created by installing transmission and letting it create it.
So can anyone kick me in the right direction, it maybe a total noob issue as it got to be 4 years since I last played with freenas and it feels very unfamiliar now :)
Regards
Dave