eirik.lars1
Explorer
- Joined
- Jul 16, 2016
- Messages
- 55
Hi,
Five year old system (disks replaced three years ago) Specs:
MB: Supermicro X11SSM-F
CPU: Intel Xeon E3-1220 V5 Skylake
RAM: 32 Gb ECC: 2x Samsung DDR4-2133 CL15 ECC SC - 16GB
Boot: Supermicro SATA DOM
Disks: 6x WDC WD60EFRX-68L0BN1 i raidz2
OS: TrueNAS-12.0-RELEASE (f862218137)
Received this error today after scrub:
Smartctl shows:
Could the ada5 disk be failing? What should be my next move? Do a smartctl long test on all the disks?
Five year old system (disks replaced three years ago) Specs:
MB: Supermicro X11SSM-F
CPU: Intel Xeon E3-1220 V5 Skylake
RAM: 32 Gb ECC: 2x Samsung DDR4-2133 CL15 ECC SC - 16GB
Boot: Supermicro SATA DOM
Disks: 6x WDC WD60EFRX-68L0BN1 i raidz2
OS: TrueNAS-12.0-RELEASE (f862218137)
Received this error today after scrub:
Code:
root@freenas:~ # zpool status pool: freenas-boot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub repaired 0B in 00:01:23 with 0 errors on Fri Jun 11 03:46:23 2021 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 errors: No known data errors pool: tank state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub repaired 8K in 10:37:45 with 0 errors on Tue Jun 15 12:37:48 2021 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/788fc1ad-5f48-11e8-bd8c-0cc47ab4d97a ONLINE 0 0 0 gptid/13a2c7ac-5f91-11e8-be7a-0cc47ab4d97a ONLINE 0 0 0 gptid/28cd3c61-5fd8-11e8-b6db-0cc47ab4d97a ONLINE 0 0 0 gptid/e0c32132-601c-11e8-8ec6-0cc47ab4d97a ONLINE 0 0 0 gptid/9a4156da-605d-11e8-b0f3-0cc47ab4d97a ONLINE 3 0 0 gptid/60556717-60a4-11e8-bb0f-0cc47ab4d97a ONLINE 0 0 0 errors: No known data errors root@freenas:~ #
Smartctl shows:
Code:
root@freenas:~ # smartctl -x /dev/ada5 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RC3 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD60EFRX-68L0BN1 Serial Number: WD-WX31D87DYY38 LU WWN Device Id: 5 0014ee 20f4b16d2 Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 15 14:29:34 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6344) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 717) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 197 197 021 - 9133 4 Start_Stop_Count -O--CK 100 100 000 - 32 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 064 064 000 - 26369 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 31 192 Power-Off_Retract_Count -O--CK 200 200 000 - 6 193 Load_Cycle_Count -O--CK 200 200 000 - 565 194 Temperature_Celsius -O---K 117 106 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 54 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 26360 hours (1098 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 dd 8c 4f 70 40 00 Error: UNC at LBA = 0x1dd8c4f70 = 8011927408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 a0 00 02 8e d0 96 20 40 08 26d+00:18:12.496 READ FPDMA QUEUED 60 00 08 00 98 00 02 4c 9d c3 c8 40 08 26d+00:18:12.496 READ FPDMA QUEUED 60 00 50 00 90 00 01 dd 8c 4f 28 40 08 26d+00:18:12.496 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 26d+00:18:12.495 READ LOG EXT 60 00 40 00 80 00 02 8e d0 96 20 40 08 26d+00:18:08.000 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 26360 hours (1098 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 dd 8c 4f 70 40 00 Error: UNC at LBA = 0x1dd8c4f70 = 8011927408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 80 00 02 8e d0 96 20 40 08 26d+00:18:08.000 READ FPDMA QUEUED 60 00 08 00 78 00 02 4c 9d c3 c8 40 08 26d+00:18:08.000 READ FPDMA QUEUED 60 00 50 00 70 00 01 dd 8c 4f 28 40 08 26d+00:18:08.000 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 26d+00:18:07.999 READ LOG EXT 60 00 40 00 60 00 02 8e d0 96 20 40 08 26d+00:18:03.505 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 26360 hours (1098 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 dd 8c 4f 70 40 00 Error: UNC at LBA = 0x1dd8c4f70 = 8011927408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 60 00 02 8e d0 96 20 40 08 26d+00:18:03.505 READ FPDMA QUEUED 60 00 08 00 58 00 02 4c 9d c3 c8 40 08 26d+00:18:03.505 READ FPDMA QUEUED 60 00 50 00 50 00 01 dd 8c 4f 28 40 08 26d+00:18:03.505 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 26d+00:18:03.503 READ LOG EXT 61 00 10 00 40 00 01 f3 8a ae 48 40 08 26d+00:17:59.020 WRITE FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 26360 hours (1098 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 dd 8c 4f 70 40 00 Error: WP at LBA = 0x1dd8c4f70 = 8011927408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 40 00 01 f3 8a ae 48 40 08 26d+00:17:59.020 WRITE FPDMA QUEUED 61 00 40 00 38 00 01 f3 8a 1b 18 40 08 26d+00:17:59.020 WRITE FPDMA QUEUED 61 00 40 00 30 00 01 f3 8a 1a c0 40 08 26d+00:17:59.020 WRITE FPDMA QUEUED 60 00 40 00 28 00 02 8e d0 96 20 40 08 26d+00:17:59.020 READ FPDMA QUEUED 60 00 08 00 20 00 02 4c 9d c3 c8 40 08 26d+00:17:59.019 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 26360 hours (1098 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 dd 8c 4f 70 40 00 Error: UNC at LBA = 0x1dd8c4f70 = 8011927408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 d8 00 01 dd 8c 60 f0 40 08 26d+00:17:54.568 READ FPDMA QUEUED 60 00 50 00 d0 00 01 dd 8c 4f 28 40 08 26d+00:17:54.562 READ FPDMA QUEUED 60 00 38 00 c8 00 01 dd 8c 4d 20 40 08 26d+00:17:54.558 READ FPDMA QUEUED 60 00 08 00 c0 00 01 dd 8b ff 20 40 08 26d+00:17:54.552 READ FPDMA QUEUED 60 00 08 00 b8 00 01 dd 8b fb 38 40 08 26d+00:17:54.546 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 127 - # 2 Extended offline Completed without error 00% 13 - # 3 Extended offline Aborted by host 90% 0 - # 4 Conveyance offline Completed without error 00% 0 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 20/38 Celsius Lifetime Min/Max Temperature: 20/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (280) Index Estimated Time Temperature Celsius 281 2021-06-15 06:32 37 ****************** ... ..(136 skipped). .. ****************** 418 2021-06-15 08:49 37 ****************** 419 2021-06-15 08:50 36 ***************** ... ..( 22 skipped). .. ***************** 442 2021-06-15 09:13 36 ***************** 443 2021-06-15 09:14 35 **************** ... ..( 80 skipped). .. **************** 46 2021-06-15 10:35 35 **************** 47 2021-06-15 10:36 38 ******************* ... ..(106 skipped). .. ******************* 154 2021-06-15 12:23 38 ******************* 155 2021-06-15 12:24 37 ****************** ... ..(124 skipped). .. ****************** 280 2021-06-15 14:29 37 ****************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 31 --- Lifetime Power-On Resets 0x01 0x010 4 26369 --- Power-on Hours 0x01 0x018 6 71888865320 --- Logical Sectors Written 0x01 0x020 6 1818551784 --- Number of Write Commands 0x01 0x028 6 535154745801 --- Logical Sectors Read 0x01 0x030 6 2580298900 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 26188 --- Spindle Motor Power-on Hours 0x03 0x010 4 26175 --- Head Flying Hours 0x03 0x018 4 572 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 476 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 5 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 36 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 46 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 43 --- Highest Average Short Term Temperature 0x05 0x038 1 21 --- Lowest Average Short Term Temperature 0x05 0x040 1 40 --- Highest Average Long Term Temperature 0x05 0x048 1 26 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 168 --- Number of Hardware Resets 0x06 0x010 4 62 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) Index LBA Hours 0 4303484304 - 1 4303484305 - 2 4303484306 - 3 4303484307 - 4 4303484308 - 5 4303484309 - 6 4303484310 - 7 4303484311 - 8 4303484312 - 9 4303484313 - 10 4303484314 - 11 4303484315 - 12 4303484316 - 13 4303484317 - 14 4303484318 - 15 4303484319 - 16 4321384408 - 17 4321384409 - 18 4321384410 - 19 4321384411 - 20 4321384412 - 21 4321384413 - 22 4321384414 - 23 4321384415 - 24 4321384424 - 25 4321384425 - 26 4321384426 - 27 4321384427 - 28 4321384428 - 29 4321384429 - 30 4321384430 - ... (937 entries not shown) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 15166624 Vendor specific
Could the ada5 disk be failing? What should be my next move? Do a smartctl long test on all the disks?