Hi,
I just do a fresh new install of 9.10.2-U3. And I find
1. There is no vesa. There is no any output of
# dmesg -a |grep -i vesa or
# kldload vesa
2. I have a pool with 3x RAID-Z, When there is a disk fail in a RAID-Z, the hotspare disk wont take over and do resilver.
Is anyone have the same situation?
I just do a fresh new install of 9.10.2-U3. And I find
1. There is no vesa. There is no any output of
# dmesg -a |grep -i vesa or
# kldload vesa
2. I have a pool with 3x RAID-Z, When there is a disk fail in a RAID-Z, the hotspare disk wont take over and do resilver.
Is anyone have the same situation?
Code:
[root@trzenas] ~# zpool status -v vol pool: vol state: DEGRADED status: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scan: none requested config: NAME STATE READ WRITE CKSUM vol DEGRADED 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/fcf164a7-3aa8-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 gptid/fd826d90-3aa8-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 gptid/fe15a84b-3aa8-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 raidz1-1 DEGRADED 0 0 0 gptid/fea7bb19-3aa8-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 11960994160194346699 REMOVED 0 0 0 was /dev/gptid/ff3cca73-3aa8-11e7-86b6-a0369f7d4048 gptid/ffe5daef-3aa8-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 raidz1-2 ONLINE 0 0 0 gptid/0079f29e-3aa9-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 gptid/0112da94-3aa9-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 gptid/01a6cebd-3aa9-11e7-86b6-a0369f7d4048 ONLINE 0 0 0 spares gptid/023cfd2c-3aa9-11e7-86b6-a0369f7d4048 AVAIL errors: No known data errors [root@trzenas] ~# kldload vesa kldload: can't load vesa: No such file or directory [root@trzenas] ~# dmesg -a |grep -i vesa