H0mersimps0n
Dabbler
- Joined
- Nov 19, 2013
- Messages
- 11
Trying to repurpose a GA-73PVM-S2H Mobo/setup.
Got an avango/LSI 9211-8i
SAS to 4 SATA drives cable X 2
6 Hitachi 3tb drives
Computer boots, 9211 boots when nothing plugged in.
If I plug in either one or the other or both SAS to SATA cables (one cable has 4 drives the other has 2 drives on it) then the computer posts, 9211 card loads, bios lists all drives but hangs the PC after saying "loaded successfully"
Updated firmware to IT version
Disabled all features possible in BIOS, boot order correct
SAS cables unplugged all works
Any SAS cable/drive plugged in won't finish bios post
Thoughts?
Got an avango/LSI 9211-8i
SAS to 4 SATA drives cable X 2
6 Hitachi 3tb drives
Computer boots, 9211 boots when nothing plugged in.
If I plug in either one or the other or both SAS to SATA cables (one cable has 4 drives the other has 2 drives on it) then the computer posts, 9211 card loads, bios lists all drives but hangs the PC after saying "loaded successfully"
Updated firmware to IT version
Disabled all features possible in BIOS, boot order correct
SAS cables unplugged all works
Any SAS cable/drive plugged in won't finish bios post
Thoughts?