8.3.0 Release GUI log in error: " "The page you are looking for is temporarily..."

[nons]

I just got this error when trying to log into 8.3.0 http:

"The page you are looking for is temporarily unavailable. Please try again later."

This was presented in the middle of my browser with an all white background. NAS services and shares were all running fine. ssh in and restarted django.

//


/usr/local/etc/rc.d/django restart

//

I never had this happen before 8.3.0 and had just been using the web GUI 15 minutes earlier without issue. I did a clean install when I upgraded from 8.2 to 8.3 so everything was fresh and only a few days up.

nons

 

[nons]

Interesting...

http://forums.freenas.org/showthread.php?6621-Login-eror-(8-2-Beta)

nons

 

[Yell]

this sound like the login mask is cached in the browser, but your freenas box has a new ip.
(do you use DNS-name or the IP address?)

Try the IP as you use with ssh. (and clear the browser cache)

 

[nons]

This just happened again and I had to restart django again through ssh to get back in through the web GUI.

I got three emails from cron:

Cron <root@freenas> /usr/local/bin/python /usr/local/bin/graph.py
find: -delete: unlink(/var/db/graphs/weekly/if-usbus6-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/cpu-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/memory-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/load-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/processes-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/swap-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/df-RAIDZ1-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/df-RAIDZ1-Storage-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/weekly/df-SSD-1w.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/if-usbus6-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/cpu-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/memory-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/load-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/processes-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/swap-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/df-RAIDZ1-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/df-RAIDZ1-Storage-1y.png): No such file or directory
find: -delete: unlink(/var/db/graphs/yearly/df-SSD-1y.png): No such file or directory

Cron <root@freenas> /usr/local/bin/python /usr/local/bin/graph.py
Traceback (most recent call last):
File "/usr/local/bin/graph.py", line 486, in <module>
GenerateDiskspaceGraph()
File "/usr/local/bin/graph.py", line 477, in GenerateDiskspaceGraph
'GPRINT:used_avg:LAST:%5.1lf%sB Last\l'
rrdtool.error: opening '/var/db/collectd/rrd/localhost/df/df-mnt-RAIDZ1-Storage.rrd': No such file or directory

Cron <root@freenas> /usr/local/bin/python /usr/local/bin/graph.py
find: -delete: unlink(/var/db/graphs/monthly/load-1m.png): No such file or directory
find: -delete: unlink(/var/db/graphs/monthly/processes-1m.png): No such file or directory
find: -delete: unlink(/var/db/graphs/monthly/swap-1m.png): No such file or directory
find: -delete: unlink(/var/db/graphs/monthly/df-RAIDZ1-1m.png): No such file or directory
find: -delete: unlink(/var/db/graphs/monthly/df-RAIDZ1-Storage-1m.png): No such file or directory
find: -delete: unlink(/var/db/graphs/monthly/df-SSD-1m.png): No such file or directory

Does this have anything to do with the web GUI stopping?

Thanks,
nons

 

[mbf210]

I have the same problem. Installed 8.3.0 on a new machine with RAID1. Django fails often and i have to restart it. Only for it to stop a few minutes later. The graph.py errors come via email several times a day.

 

[William Grzybowski]

I have the same problem. Installed 8.3.0 on a new machine with RAID1. Django fails often and i have to restart it. Only for it to stop a few minutes later. The graph.py errors come via email several times a day.

Sounds a lot like you need more RAM, why else would django be dying?

 

[TwistedNL]

same issue here on 8.2 with 8 GB of memory so that can't be the problem if you ask me

 

[Ismael Duarte]

Re: 8.3.0 Release GUI log in error: " "The page you are looking for is temporarily...

I've a lot of that also, with 8.3.1

Code:

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p6 #0 r248141M: Sun Mar 10 23:42:41 PDT 2013
    root@build.ixsystems.com:/home/jpaetzel/8.3.1-RELEASE/os-base/i386/i386/tank/home/jpaetzel/8.3.1-RELEASE/FreeBSD/src/sys/FREENAS.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3198.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Family = f  Model = 3  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
  TSC: P-state invariant
real memory  = 3221225472 (3072 MB)
avail memory = 3139133440 (2993 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
hpt27xx: RocketRAID 27xx controller driver v1.0 (Mar 10 2013 23:42:32)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Promise PDC20378 SATA150 controller> port 0xdf00-0xdf3f,0xdfa0-0xdfaf,0xdc00-0xdc7f mem 0xfeafe000-0xfeafefff,0xfeac0000-0xfeadffff irq 23 at device 4.0 on pci2
atapci0: [ITHREAD]
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
ata4: <ATA channel> at channel 2 on atapci0
ata4: [ITHREAD]
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaf8000-0xfeafbfff irq 22 at device 5.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:d4:19:0f:38
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f irq 18 at device 31.1 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel> at channel 0 on atapci1
ata5: [ITHREAD]
ata6: <ATA channel> at channel 1 on atapci1
ata6: [ITHREAD]
atapci2: <Intel ICH5 SATA150 controller> port 0xef88-0xef8f,0xef84-0xef87,0xef68-0xef6f,0xef80-0xef83,0xeeb0-0xeebf irq 18 at device 31.2 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel> at channel 0 on atapci2
ata7: [ITHREAD]
ata8: <ATA channel> at channel 1 on atapci2
ata8: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hpt27xx: no controller detected.
GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4)usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered

uhub4: 8 ports with 8 removable, self powered
ugen4.2: <JetFlash> at usbus4
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus4
ada0 at ata7 bus 0 scbus5 target 0 lun 0
ada0: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: <JetFlash Transcend 2GB 1100> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 1920MB (3932160 512 byte sectors: 255H 63S/T 244C)
SMP: AP CPU #1 Launched!
GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s).
Trying to mount root from ufs:/dev/ufs/FreeNASs1a
ZFS filesystem version 5
ZFS storage pool version 28
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software

 

[KevinM]

Re: 8.3.0 Release GUI log in error: " "The page you are looking for is temporarily...

I've a lot of that also, with 8.3.1

I'm seeing it as well, and my box has 128 GB memory.

 

[OctaneZ]

I am seeing this error as well:

Code:

uname -a
FreeBSD fourslot 8.3-RELEASE-p4 amd64

When I try to fire up django I get:

Code:

[benc@fourslot] /usr/local/www/freenasUI# python manage.py runserver 0.0.0.0:8080
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
Traceback (most recent call last):
  File "manage.py", line 40, in <module>
    from django.core.management import execute_from_command_line
ImportError: No module named django.core.management

Code:

[benc@fourslot] /usr/local/www/freenasUI# /usr/local/etc/rc.d/django restartcat: /var/run/django.pid: No such file or directory
usage: kill [-s signal_name] pid ...
      kill -l [exit_status]
      kill -signal_name pid ...
      kill -signal_number pid ...
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
Traceback (most recent call last):
  File "/usr/local/www/freenasUI/manage.py", line 40, in <module>
    from django.core.management import execute_from_command_line
ImportError: No module named django.core.management
Starting django.

Any advice other than a ISO upgrade? Or is my USB stick on the fritz (it's 8GB)?

 

[cyberjock]

What's your FreeNAS version? There have been a couple of FreeNAS releases that have the same FreeBSD base version. If you aren't using 8.3.1-p2 I'd recommend you upgrade to that.

 

[OctaneZ]

What's your FreeNAS version? There have been a couple of FreeNAS releases that have the same FreeBSD base version. If you aren't using 8.3.1-p2 I'd recommend you upgrade to that.

I'm on 8.3-RELEASE-p4 amd64, but can't get to to the GUI, so would be looking to do an ISO upgrade to any new version if I can't get the GUI back. Would prefer a GUI upgrade as an ISO install means manhandling the server to somewhere with a VGA input.

 

[cyberjock]

There was no 8.3 release P4. I'd recommend you just do an ISO upgrade to 8.3.1-p2-x64.