Hello,
I'm not 100% if this is a bug, or just an oddity, so posting here. My apologies if this is the wrong area.
After a fresh install from 8.0.1 and importing the backup config, all systems are GO. Except under the View Disks tab where the disks are displayed as such:
ID 1 = ad0 = Serial Unknown, Identification Unknown
ID 2 = ada0 = Serial (shows correctly), Identification (shows correctly)
ID 3 = ada1 = Serial (shows correctly), Identification (shows correctly)
ID 4 = ada2 = Serial (shows correctly), Identification (shows correctly)
ID 5 = ada3 = Serial (shows correctly), Identification (shows correctly)
This is displaying incorrectly as under 'zpool status' tab, or by running zpool status pool0 command at shell it shows all the disks correctly.
I did upgrade zpool from v13 to v15. Beyond that I am unsure how to resolve this View Disks display error.
Any assistance would be appreciated.
Thank you.
I'm not 100% if this is a bug, or just an oddity, so posting here. My apologies if this is the wrong area.
After a fresh install from 8.0.1 and importing the backup config, all systems are GO. Except under the View Disks tab where the disks are displayed as such:
ID 1 = ad0 = Serial Unknown, Identification Unknown
ID 2 = ada0 = Serial (shows correctly), Identification (shows correctly)
ID 3 = ada1 = Serial (shows correctly), Identification (shows correctly)
ID 4 = ada2 = Serial (shows correctly), Identification (shows correctly)
ID 5 = ada3 = Serial (shows correctly), Identification (shows correctly)
This is displaying incorrectly as under 'zpool status' tab, or by running zpool status pool0 command at shell it shows all the disks correctly.
Code:
[root@freenas] ~# zpool status pool0 pool: pool0 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM pool0 ONLINE 0 0 0 raidz2 ONLINE 0 0 0 ada4 ONLINE 0 0 0 ada0 ONLINE 0 0 0 ada1 ONLINE 0 0 0 ada2 ONLINE 0 0 0 ada3 ONLINE 0 0 0 errors: No known data errors
I did upgrade zpool from v13 to v15. Beyond that I am unsure how to resolve this View Disks display error.
Any assistance would be appreciated.
Thank you.