So,
I've got FreeNAS 8.04 running on the following :
AMD A8 3870K BE
Asus F1A75-Pro w/6 SATA 3 connection (using the A75 built-in controller)
1 x Bytecc 2xSata 3 controller (with 1 IDE port)
8GB DDR3 1600
ZFS RaidZ2
6 x 1TB 7200rpm Sata3 HDD
1 x 30GB AData SSD as cache
This is a brand new FreeNAS setup, although the drives are all previously used (albeit less than 1 year old, and a mix of 2 brands and different batches).
I've run checks on the SSD in a seperate system (two systems actually), and SMART reports no errors, however when I create the RaidZ2 group, it ALWAYS reads the SSD with the following error :
Device: /dev/ada6, 44424 Offline uncorrectable sectors
Is there something here I should be worried about, or is there something I can do to validate the SSD as a cache drive? (make sure it's not going to cause corruption on a new ZFS volume).
Thanks in advance,
Spyrule
I've got FreeNAS 8.04 running on the following :
AMD A8 3870K BE
Asus F1A75-Pro w/6 SATA 3 connection (using the A75 built-in controller)
1 x Bytecc 2xSata 3 controller (with 1 IDE port)
8GB DDR3 1600
ZFS RaidZ2
6 x 1TB 7200rpm Sata3 HDD
1 x 30GB AData SSD as cache
This is a brand new FreeNAS setup, although the drives are all previously used (albeit less than 1 year old, and a mix of 2 brands and different batches).
I've run checks on the SSD in a seperate system (two systems actually), and SMART reports no errors, however when I create the RaidZ2 group, it ALWAYS reads the SSD with the following error :
Device: /dev/ada6, 44424 Offline uncorrectable sectors
Is there something here I should be worried about, or is there something I can do to validate the SSD as a cache drive? (make sure it's not going to cause corruption on a new ZFS volume).
Thanks in advance,
Spyrule