espinobj
Cadet
- Joined
- Apr 17, 2019
- Messages
- 8
FreeNAS-11.2-U3
MoBo: Asus MSA97 LE R2.0
CPU: AMD FX(tm)-4170 Quad-Core Processor (4 cores)
Ram: 16GB
Boot: Dual Samsung 3.1 external USB
HDD x6: Seagate Barracuda ST2000DM008
This has been my file & Plex server for the better part of the month. No issues! Lot of tinkering rearranging etc etc. All with no issues at all. FreeNAS is a beast!
Until...
I got in my 10gb network upgrade. (Help me)
2x - Emulex OCE 10102 dual SFP+ 10gb ports
2x - A7EL-SN85-ADMA 850nm transceiver
2x - FTLX8574D3BCL 850nm transceiver
(two different transceivers because that was what I had on hand. Only intent to use one pair for now until my skill level increases and I bump my whole home to 10g)
**Note on the same 10g card I also see a sticker for HP CN1000E through my research it appears to be no difference just a buy out of Emulex I assume
Placing this card into me FreeNAS server causes a Fatal trap 12: page fault while in kernel mode removing the card and system boots normally.
Is this simply an incompatibility between FreeNAS and my network card? Does anyone have experience with these cards or similar? Im extremely green when it comes to this side of enterprise networking and I could use the extra help and knowledge. Id like a direct 10gb link to my FreeNas box via one of my Fiber 10g SFP's. My profession is in structured cabling in data centers and large scale construction projects with expertise in fiber optic cabling.
MoBo: Asus MSA97 LE R2.0
CPU: AMD FX(tm)-4170 Quad-Core Processor (4 cores)
Ram: 16GB
Boot: Dual Samsung 3.1 external USB
HDD x6: Seagate Barracuda ST2000DM008
This has been my file & Plex server for the better part of the month. No issues! Lot of tinkering rearranging etc etc. All with no issues at all. FreeNAS is a beast!
Until...
I got in my 10gb network upgrade. (Help me)
2x - Emulex OCE 10102 dual SFP+ 10gb ports
2x - A7EL-SN85-ADMA 850nm transceiver
2x - FTLX8574D3BCL 850nm transceiver
(two different transceivers because that was what I had on hand. Only intent to use one pair for now until my skill level increases and I bump my whole home to 10g)
**Note on the same 10g card I also see a sticker for HP CN1000E through my research it appears to be no difference just a buy out of Emulex I assume
Placing this card into me FreeNAS server causes a Fatal trap 12: page fault while in kernel mode removing the card and system boots normally.
Is this simply an incompatibility between FreeNAS and my network card? Does anyone have experience with these cards or similar? Im extremely green when it comes to this side of enterprise networking and I could use the extra help and knowledge. Id like a direct 10gb link to my FreeNas box via one of my Fiber 10g SFP's. My profession is in structured cabling in data centers and large scale construction projects with expertise in fiber optic cabling.