- Joined
- Dec 31, 2021
- Messages
- 973
TL:DR = It wasn’t in IT mode.
I have a (above mentioned) LSI megaRAID card that has been flashed to IT mode, and works fine with unRAID, but not TrueNAS. It sees the disks and everything, but not the serial numbers. It also names the disks (mfisyspd0, mfisyspd1, mfisyspd2, mfisyspd3, mfisyspd4, mfisyspd5) which accorign to @jgreco means it is not properly flashed to IT mode.
Dell PowerEdge R510
64GB ECC RAM
2x Xeon CPU
It comes off ebay and was flashed to IT mode. (before purchase)
sas2flash and sas3flash commands don't show anything...
I have a (above mentioned) LSI megaRAID card that has been flashed to IT mode, and works fine with unRAID, but not TrueNAS. It sees the disks and everything, but not the serial numbers. It also names the disks (mfisyspd0, mfisyspd1, mfisyspd2, mfisyspd3, mfisyspd4, mfisyspd5) which accorign to @jgreco means it is not properly flashed to IT mode.
Dell PowerEdge R510
64GB ECC RAM
2x Xeon CPU
It comes off ebay and was flashed to IT mode. (before purchase)
sas2flash and sas3flash commands don't show anything...
Last edited: