Good Evening, hope you are all doing well and thanks for reading this note.
I just installed FreeNAS after reading about it and doing some homework before diving in.
I'm trying to install a Jail Transmission using VIMAGE for multiple networks. I'm migrating my TransmissionBT from Vmware (OpenSuse, With vSphere switch) to FreeNAS. This setup worked jsut fine on Vmware. (Not comparing, just saying...lol)
PBI version - 2.77_1
FreeNAS version - FreeNAS-9.1.1-RELEASE-x64 (a752d35)
Private network interface - em0
Public network interface - em1
I'm trying to "dual" home this jail on two network, lets say 10.0.0.0/24 is the private interface and 20.0.0.0/24 is the public interface. With a default router as 20.0.0.1/24.
I applied 10.0.0.2/24 on the physical em0 that's the main private interface for the FreeNAS server.
I applied 20.0.0.2/24 on the physical em1 that's the main public interface for the FreeNAS server.
I built the jail successfully and configure it as following...
Jail setup
IPv4 Address - 10.0.0.3/24
IPv4 Aliase - 20.0.0.3/24
IPv4 default - 20.0.0.1
VIMAGE - Enabled
When i apply the virtual machine...
bridge0 is created with no address with interfaces epair0a and em0 added as member. In the jail epair0b is assigned the ip address 10.0.0.3/24 and 20.0.0.3/24 with the correct default gateway (20.0.0.1).
I'm not able to ping the 20.0.0.0/24 network from jail until i add em1 to bridge0. I think this were my problem starts.
Let me continue. Once i add the em1 to the bridge0 i can ping the physical interface 20.0.0.2/24 however not able to ping the gateway 20.0.0.1/24... However if i ping from the gateway to 20.0.0.3 i get a response as long as i'm pinging from the gateway?? Weird.
Other observation... i have full access to the 10.0.0.0/24 private address with you problems. Also, they are both connected to the same cisco router (gateway)...
So my problem in a nut is, i'm not able to keep the pass traffic to the public network... The traffic just fails... The private network seems to work just fine.
Please let me know if got any suggestions... i'm new to FreeNAS but have played with FreeBSD years ago. I took a chance to read the documentation so i'm not sure if this is a bug or i'm not doing something correct.
Thanks in advance.
I just installed FreeNAS after reading about it and doing some homework before diving in.
I'm trying to install a Jail Transmission using VIMAGE for multiple networks. I'm migrating my TransmissionBT from Vmware (OpenSuse, With vSphere switch) to FreeNAS. This setup worked jsut fine on Vmware. (Not comparing, just saying...lol)
PBI version - 2.77_1
FreeNAS version - FreeNAS-9.1.1-RELEASE-x64 (a752d35)
Private network interface - em0
Public network interface - em1
I'm trying to "dual" home this jail on two network, lets say 10.0.0.0/24 is the private interface and 20.0.0.0/24 is the public interface. With a default router as 20.0.0.1/24.
I applied 10.0.0.2/24 on the physical em0 that's the main private interface for the FreeNAS server.
I applied 20.0.0.2/24 on the physical em1 that's the main public interface for the FreeNAS server.
I built the jail successfully and configure it as following...
Jail setup
IPv4 Address - 10.0.0.3/24
IPv4 Aliase - 20.0.0.3/24
IPv4 default - 20.0.0.1
VIMAGE - Enabled
When i apply the virtual machine...
bridge0 is created with no address with interfaces epair0a and em0 added as member. In the jail epair0b is assigned the ip address 10.0.0.3/24 and 20.0.0.3/24 with the correct default gateway (20.0.0.1).
I'm not able to ping the 20.0.0.0/24 network from jail until i add em1 to bridge0. I think this were my problem starts.
Let me continue. Once i add the em1 to the bridge0 i can ping the physical interface 20.0.0.2/24 however not able to ping the gateway 20.0.0.1/24... However if i ping from the gateway to 20.0.0.3 i get a response as long as i'm pinging from the gateway?? Weird.
Other observation... i have full access to the 10.0.0.0/24 private address with you problems. Also, they are both connected to the same cisco router (gateway)...
So my problem in a nut is, i'm not able to keep the pass traffic to the public network... The traffic just fails... The private network seems to work just fine.
Please let me know if got any suggestions... i'm new to FreeNAS but have played with FreeBSD years ago. I took a chance to read the documentation so i'm not sure if this is a bug or i'm not doing something correct.
Thanks in advance.