Vishimtar
Dabbler
- Joined
- Nov 17, 2014
- Messages
- 30
Hello,
First of all, sorry if i made a copy of another thread but could not find solution to my problems.
I have done some research about the data transfer speed for my freenas system because of my problems.
My problem is, the data transfer speed is not getting over 100mb/s while i am having 1Gbits network over iscsi cross cable. Freenas reports about my disks that its only 5mb/s of write speed to my disks.
The system base on,
software : FreeNAS-9.2.1.9-RELEASE-x64 (2bbba09) version,
cpu : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
mainboard : ASUS P5Q Deluxe
ram : 8gb ddr2
HDD(s) : Wersterndigital 3 TB Red NAS SATA3 (6 of them)
mainboard specs : https://www.asus.com/Motherboards/P5Q_Deluxe/specifications/
cpu spces : http://ark.intel.com/tr/products/29...rocessor-Q6600-8M-Cache-2_40-GHz-1066-MHz-FSB
HDD specs : http://www.wdc.com/en/products/products.aspx?id=810#Tab3
the mainboard supports SATA2 only though.
so this data writing and data transfer speed is normal ?
How can i improve the data transfer speed and writing speed ?
Thanks,
Kind Regards
First of all, sorry if i made a copy of another thread but could not find solution to my problems.
I have done some research about the data transfer speed for my freenas system because of my problems.
My problem is, the data transfer speed is not getting over 100mb/s while i am having 1Gbits network over iscsi cross cable. Freenas reports about my disks that its only 5mb/s of write speed to my disks.
The system base on,
software : FreeNAS-9.2.1.9-RELEASE-x64 (2bbba09) version,
cpu : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
mainboard : ASUS P5Q Deluxe
ram : 8gb ddr2
HDD(s) : Wersterndigital 3 TB Red NAS SATA3 (6 of them)
mainboard specs : https://www.asus.com/Motherboards/P5Q_Deluxe/specifications/
cpu spces : http://ark.intel.com/tr/products/29...rocessor-Q6600-8M-Cache-2_40-GHz-1066-MHz-FSB
HDD specs : http://www.wdc.com/en/products/products.aspx?id=810#Tab3
the mainboard supports SATA2 only though.
so this data writing and data transfer speed is normal ?
How can i improve the data transfer speed and writing speed ?
Thanks,
Kind Regards