_Will_
Explorer
- Joined
- Jun 11, 2014
- Messages
- 56
I built the following system last week.
Case: Fractal Design Node 304
Mobo: ASRock E3C226D2I
CPU: Xeon E3 1231 V3
RAM: 2 x Crucial 8GB ECC
Issues:
Case: Fractal Design Node 304
Mobo: ASRock E3C226D2I
CPU: Xeon E3 1231 V3
RAM: 2 x Crucial 8GB ECC
Issues:
- Sometimes the front case LED works, sometimes it doesn't.
- The CPU runs at around 50 deg C in the BIOS alone. It should be between 27 and 43 deg C according to Intel. In Memtest86+ (which uses only one core) temperatures reach 59 deg C. I don't know if this is normal or not.
- Setting the fan speeds to "FULL ON" in the BIOS increases fan speed, however it does not maximize them. The fan speed for this processor has a maximum RPM of 3150. I never saw mine go above 2200 RPM. ASRock says that this has been reported before and they believe it is a BIOS issue.
- I got major event log errors, and ASRock doesn't know what they are. Error Code: EFI 03058003. After doing more of my own research I found out that the desciption of this error code is "DXE BS driver unrecognized". I haven't looked into this further beacause I am considering returning everything (except the processor which I can only have replaced).