kleinejan
Dabbler
- Joined
- Jun 15, 2011
- Messages
- 12
Hi, after upgrading to 9.2.1 every thing worked like a charm. Yesterday my nas suddenly crashed.
The console displayed:
Rebooting did not help, so I made a new USB stick.
Now, when I try to import the ZFS volume (GUI of CLI), my console gets tons of errors and reboots. Errors are to fast to read. ;)
Really no clue where to start, look next. The forum did not give me the answer yet, have sifted a lot of pages. :-|
System:
Non ECC Ram 16Gb (working on it)
ZFS pool:
Gpart status
The console displayed:
Code:
KDB: enter: panic
Rebooting did not help, so I made a new USB stick.
Now, when I try to import the ZFS volume (GUI of CLI), my console gets tons of errors and reboots. Errors are to fast to read. ;)
Really no clue where to start, look next. The forum did not give me the answer yet, have sifted a lot of pages. :-|
System:
Non ECC Ram 16Gb (working on it)
ZFS pool:
Code:
[root@freenas] ~# zpool import pool: grinder id: 13947999836474807747 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: grinder ONLINE raidz2-0 ONLINE gptid/f28d9c40-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/f30ff67e-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/f379853f-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/e523a987-8153-11e3-8c42-60a44cb1b1b3 ONLINE raidz2-1 ONLINE gptid/f44f00eb-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/f4a243ce-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/f4fe1a7f-7309-11e3-bac0-60a44cb1b1b3 ONLINE gptid/f56d471b-7309-11e3-bac0-60a44cb1b1b3 ONLINE
Gpart status
Code:
[root@freenas] ~# gpart status Name Status Components ada0p1 OK ada0 ada0p2 OK ada0 ada1p1 OK ada1 ada1p2 OK ada1 ada2p1 OK ada2 ada2p2 OK ada2 ada3p1 OK ada3 ada3p2 OK ada3 ada4p1 OK ada4 ada4p2 OK ada4 ada5p1 OK ada5 ada5p2 OK ada5 ada6p1 OK ada6 ada6p2 OK ada6 ada7p1 OK ada7 ada7p2 OK ada7 da0s1 OK da0 da0s2 OK da0 da0s3 OK da0 da0s4 OK da0 da0s1a OK da0s1 da0s2a OK da0s2