jal
Dabbler
- Joined
- Jan 12, 2015
- Messages
- 14
Hello all,
I received my first error on my build.
Since it is one checksum error, I'm tempted to clear and scrub again and see what happens. I have cold spares. I'm just unsure if I'm not taking this seriously enough or not.
Anyone have an opinion on how to proceed?
Thanks,
-j
I received my first error on my build.
Code:
# zpool status pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h0m with 0 errors on Tue Nov 17 03:45:41 2015 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 gptid/c2c02af1-e4db-11e4-803d-d05099642174 ONLINE 0 0 0 errors: No known data errors pool: void state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 0 in 16h15m with 0 errors on Tue Nov 17 16:15:40 2015 config: NAME STATE READ WRITE CKSUM void ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/82201973-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 0 gptid/82978f16-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 0 gptid/830be023-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 1 gptid/83812136-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 0 gptid/83f5a381-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 0 gptid/846a7b3a-e78c-11e4-8165-d05099642174.eli ONLINE 0 0 0 errors: No known data errors
Since it is one checksum error, I'm tempted to clear and scrub again and see what happens. I have cold spares. I'm just unsure if I'm not taking this seriously enough or not.
Anyone have an opinion on how to proceed?
Thanks,
-j