Stason
Cadet
- Joined
- Nov 3, 2016
- Messages
- 6
Hello everyone.
Just installed FreeNas a couple of days ago and I am experiencing an issue that I can't resolve.
I did search the forums, but was unable to find an answer to the problem.
First off, the system is:
I installed FreeNas from a USB stick to another USB stick, booted and formatted the drives.
I then setup a user, setup a Windows share and copied some data to FreeNas. Everything worked so far.
I also assigned a static IP to FreeNas, disabled DHCP and setup SMTP.
I have some experience with Linux, but would really appreciate if someone can chime in.
When the box boots, I see no errors, the IP is assigned and FreeNas console menu becomes visible.
As soon as the menu is on the screen, these messages start popping up:
Now, until I see third "Error 5, Retries exhausted" message, the WebGIU and shared storage are both unavailable (can still connect to the box through SSH though).
When third "Error 5, Retries exhausted" message pops out, everything starts working like a charm.
After some time (about 30 minutes), same thing again:
Now during this, the WebGIU is fully functional, but I can't access my shared storage.
As you can tell, this has something to do with the hard drives (cables? SATA controllers?), but not sure what exactly. The drives are all brand new. Maybe I forgot to set something up during install? Although I am sure I followed instructions well. Anything specific in BIOS should be adjusted with regards to hard drives?
I also think it might have something to do with smartd. The disks are checked during the bootup and then every 30 minutes, correct? Don't want to disable S.M.A.R.T. for sure though.
Also, there was one time when I booted the machine and these messages never poped up. Everything worked with no hikkups for about 50 hrs. Until the reboot.
Any info would be really appreciated, guys. Thank you in advance!
Just installed FreeNas a couple of days ago and I am experiencing an issue that I can't resolve.
I did search the forums, but was unable to find an answer to the problem.
First off, the system is:
Code:
FreeNAS-9.10.1-U2 Motherboard EVGA nVidia nForce 680i SLI Intel Core2 Duo E6750 @ 2.66GHz 8GB RAM 8GB USB Stick 3 x WD Red 3TB drives (connected to SATA0, SATA1, SATA2) Network Card - integrated NVIDIA nForce MCP55 EVGA 650W PSU
I installed FreeNas from a USB stick to another USB stick, booted and formatted the drives.
I then setup a user, setup a Windows share and copied some data to FreeNas. Everything worked so far.
I also assigned a static IP to FreeNas, disabled DHCP and setup SMTP.
I have some experience with Linux, but would really appreciate if someone can chime in.
When the box boots, I see no errors, the IP is assigned and FreeNas console menu becomes visible.
As soon as the menu is on the screen, these messages start popping up:
Nov 10 01:51:20 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:20 nas (ada0:ata2:0:0:0): CAM status: Command timeout
Nov 10 01:51:20 nas (ada0:ata2:0:0:0): Retrying command
Nov 10 01:51:20 nas (ada1:ata3:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:20 nas (ada1:ata3:0:0:0): CAM status: Command timeout
Nov 10 01:51:20 nas (ada1:ata3:0:0:0): Retrying command
Nov 10 01:51:20 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:20 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:51:20 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:51:50 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:50 nas (ada0:ata2:0:0:0): CAM status: Command timeout
Nov 10 01:51:50 nas (ada0:ata2:0:0:0): Retrying command
Nov 10 01:51:50 nas (ada1:ata3:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:50 nas (ada1:ata3:0:0:0): CAM status: Command timeout
Nov 10 01:51:50 nas (ada1:ata3:0:0:0): Retrying command
Nov 10 01:51:50 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:51:50 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:51:50 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:52:20 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:20 nas (ada0:ata2:0:0:0): CAM status: Command timeout
Nov 10 01:52:20 nas (ada0:ata2:0:0:0): Retrying command
Nov 10 01:52:20 nas (ada1:ata3:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:20 nas (ada1:ata3:0:0:0): CAM status: Command timeout
Nov 10 01:52:20 nas (ada1:ata3:0:0:0): Retrying command
Nov 10 01:52:20 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:20 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:52:20 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:52:50 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:50 nas (ada0:ata2:0:0:0): CAM status: Command timeout
Nov 10 01:52:50 nas (ada0:ata2:0:0:0): Retrying command
Nov 10 01:52:50 nas (ada1:ata3:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:50 nas (ada1:ata3:0:0:0): CAM status: Command timeout
Nov 10 01:52:50 nas (ada1:ata3:0:0:0): Retrying command
Nov 10 01:52:50 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:52:50 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:52:50 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:53:20 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:53:20 nas (ada0:ata2:0:0:0): CAM status: Command timeout
Nov 10 01:53:20 nas (ada0:ata2:0:0:0): Error 5, Retries exhausted
Nov 10 01:53:21 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e0 20 40 40 58 00 00 00 08 00
Nov 10 01:53:21 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:53:21 nas (ada2:ata4:0:0:0): Error 5, Retries exhausted
Nov 10 01:53:51 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e8 20 40 40 58 00 00 00 10 00
Nov 10 01:53:51 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:53:51 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:54:21 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e8 20 40 40 58 00 00 00 10 00
Nov 10 01:54:21 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:54:21 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:54:51 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e8 20 40 40 58 00 00 00 10 00
Nov 10 01:54:51 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:54:51 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:55:22 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e8 20 40 40 58 00 00 00 10 00
Nov 10 01:55:22 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:55:22 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 01:55:52 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 e8 20 40 40 58 00 00 00 10 00
Nov 10 01:55:52 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 01:55:52 nas (ada2:ata4:0:0:0): Error 5, Retries exhausted
Now, until I see third "Error 5, Retries exhausted" message, the WebGIU and shared storage are both unavailable (can still connect to the box through SSH though).
When third "Error 5, Retries exhausted" message pops out, everything starts working like a charm.
After some time (about 30 minutes), same thing again:
Nov 10 02:21:17 nas (ada1:ata3:0:0:0): WRITE_DMA48. ACB: 35 00 28 52 40 40 58 00 00 00 10 00
Nov 10 02:21:17 nas (ada1:ata3:0:0:0): CAM status: Command timeout
Nov 10 02:21:17 nas (ada1:ata3:0:0:0): Retrying command
Nov 10 02:21:17 nas (ada2:ata4:0:0:0): WRITE_DMA48. ACB: 35 00 28 52 40 40 58 00 00 00 10 00
Nov 10 02:21:17 nas (ada2:ata4:0:0:0): CAM status: Command timeout
Nov 10 02:21:17 nas (ada2:ata4:0:0:0): Retrying command
Nov 10 02:21:17 nas (ada0:ata2:0:0:0): WRITE_DMA48. ACB: 35 00 20 52 40 40 58 00 00 00 10 00
Nov 10 02:21:17 nas (ada0:ata2:0:0:0): CAM status: Command timeout
etc..
Now during this, the WebGIU is fully functional, but I can't access my shared storage.
As you can tell, this has something to do with the hard drives (cables? SATA controllers?), but not sure what exactly. The drives are all brand new. Maybe I forgot to set something up during install? Although I am sure I followed instructions well. Anything specific in BIOS should be adjusted with regards to hard drives?
I also think it might have something to do with smartd. The disks are checked during the bootup and then every 30 minutes, correct? Don't want to disable S.M.A.R.T. for sure though.
Also, there was one time when I booted the machine and these messages never poped up. Everything worked with no hikkups for about 50 hrs. Until the reboot.
Any info would be really appreciated, guys. Thank you in advance!