Hi all,
I've just downloaded and installed freeNAS 11.2-U3 using a usb stick onto my 240GB Samsung SSD HDD Sata3, Installation was ok, however once the OS loaded i got the error (freenas the web interface could not be accessed please check network configuration). The issue i have is that i cannot make any selections in the console menu. I've attached a screenshot example. When ever i make any selection between 1 to 11 nothing happens, the "select an interface (q to quit):" keeps appearing.
My current hardware is below.
Looking forward to hearing from all you experts.
Kind Regards
I've just downloaded and installed freeNAS 11.2-U3 using a usb stick onto my 240GB Samsung SSD HDD Sata3, Installation was ok, however once the OS loaded i got the error (freenas the web interface could not be accessed please check network configuration). The issue i have is that i cannot make any selections in the console menu. I've attached a screenshot example. When ever i make any selection between 1 to 11 nothing happens, the "select an interface (q to quit):" keeps appearing.
My current hardware is below.
- motherboard make and model - Gigabyte Assassin 2 rev1.0
- CPU make and model - Intel i7 3930K
- RAM quantity - 16GB Corsair Vengeance DDR3 1644Mhz
- hard drives, quantity, model numbers, and RAID configuration, including boot drives - Samsung SSD 240GB Sata 3
- hard disk controllers - on-board iTE IT8728 chip
- network cards - on-board Bigfoot Killer E2100 chip (10/100/1000 Mbit)
Looking forward to hearing from all you experts.
Kind Regards