michaelkoehler
Dabbler
- Joined
- Jul 8, 2014
- Messages
- 17
So,
I decided to do a fresh install of FreeNAS. I had mirrored boot USB drives (I'll call them A & B). I did the fresh install to A while putting aside B. When I booted up on A, the wizard failed, and my imported volume has degraded status. I shut down and switched to drive B. It booted up fine (aside from an error that one of the boot drive mirrors was gone). I switched back to USB B and my volume is still degraded. I re-installed to B and got the same results.
Below is what I'm getting. I figured I'd seek help here before I screw anything up. Thank you very much for any help you can provide this noob!
I decided to do a fresh install of FreeNAS. I had mirrored boot USB drives (I'll call them A & B). I did the fresh install to A while putting aside B. When I booted up on A, the wizard failed, and my imported volume has degraded status. I shut down and switched to drive B. It booted up fine (aside from an error that one of the boot drive mirrors was gone). I switched back to USB B and my volume is still degraded. I re-installed to B and got the same results.
Below is what I'm getting. I figured I'd seek help here before I screw anything up. Thank you very much for any help you can provide this noob!
Code:
The volume Volume1 (ZFS) state is DEGRADED: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state.
Code:
[root@freenas ~]# zpool status -v pool: Volume1 state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://illumos.org/msg/ZFS-8000-2Q scan: resilvered 1.45M in 0h0m with 0 errors on Tue Nov 22 16:16:19 2016 config: NAME STATE READ WRITE CKSUM Volume1 DEGRADED 0 0 0 raidz2-0 DEGRADED 0 0 0 14832705343754642082 UNAVAIL 0 0 0 was /dev/gptid/b50fa5a7-7a0f-11e6-97b0-d05099c12 04b.eli gptid/d2da50f5-24b6-11e4-9659-d050991a7906 ONLINE 0 0 0 gptid/d3a6aa8f-24b6-11e4-9659-d050991a7906 ONLINE 0 0 0 gptid/d451290a-24b6-11e4-9659-d050991a7906 ONLINE 0 0 0 13344486131372377655 UNAVAIL 0 0 0 was /dev/gptid/a9196e3b-daab-11e5-8881-d050991a7 906.eli gptid/d6052625-24b6-11e4-9659-d050991a7906 ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0
Code:
[root@freenas ~]# camcontrol devlist <WDC WD30EFRX-68EUZN0 80.00A80> at scbus0 target 0 lun 0 (ada0,pass0) <ST3000DM001-1CH166 CC29> at scbus1 target 0 lun 0 (ada1,pass1) <WDC WD30EFRX-68EUZN0 82.00A82> at scbus2 target 0 lun 0 (ada2,pass2) <WDC WD30EFRX-68EUZN0 80.00A80> at scbus3 target 0 lun 0 (ada3,pass3) <Marvell Console 1.01> at scbus9 target 0 lun 0 (pass4) <WDC WD30EFRX-68EUZN0 82.00A82> at scbus14 target 0 lun 0 (ada4,pass5) <WDC WD30EFRX-68EUZN0 80.00A80> at scbus15 target 0 lun 0 (ada5,pass6) <Kingston DataTraveler 2.0 1.00> at scbus17 target 0 lun 0 (pass7,da0)