Hi All, I have what is hopefully a straight forward issue. I have a degrading HDD in a z2 configured array and need to replace it. This system has been running with no issues since 2015 so the drives are likely close to EOL. Access has been via windows shares for media and music storage and the GUI shows the shares [Volumes>'volume name'>'share name'. However, the View Volumes> on the GUI returns no volumes and the View Disks returns no discs - so although it has worked well with no issues, it is likely that I didn't set this up correctly initially. I need to identify the bad drive, replace it and initiate a resilvering process. Ideally, I'd like to get the GUI to show the volumes/disks as well.
Alert on Dashboard identifies ada1 as having 8 bad sectors
<Zpool status> returns the 8 zpool drives
<camcontrol identify ada1> returns the drive serial number
So since I can's see it in the GUI, I cannot take it offline and resilver with the GUI. Can I shut the NASbox down, replace the drive (via serial number) and expect it to resilver?
Appreciate help with both of these issues.
FreeNAS Build: FreeNAS-9.3-STABLE-201509022158
Platform: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz
Motherboard: ASRock E3C224D21
Memory: 16319MB, Crucial CT102472BD160B.118FED ECC
Drives: 8x 4TB HGST DeskStar 0S03664
Alert on Dashboard identifies ada1 as having 8 bad sectors
<Zpool status> returns the 8 zpool drives
<camcontrol identify ada1> returns the drive serial number
So since I can's see it in the GUI, I cannot take it offline and resilver with the GUI. Can I shut the NASbox down, replace the drive (via serial number) and expect it to resilver?
Appreciate help with both of these issues.
FreeNAS Build: FreeNAS-9.3-STABLE-201509022158
Platform: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz
Motherboard: ASRock E3C224D21
Memory: 16319MB, Crucial CT102472BD160B.118FED ECC
Drives: 8x 4TB HGST DeskStar 0S03664