Various Errors During Install Process - CAM Status, CDDONE, etc

[theprez]

Hello,

Long time lurker, first time user and poster - I'm attempting to install FreeNAS on a new computer, specs are below:

• Intel Core I5 CPU 3.2 GHZ
• 16 GB Ram
• 4 SATA 3TB Hard Drives
• Intel Z87 Chipset

Attached is a screen capture of the various errors that appear during the CD booting process. The CD eventually does load and I can proceed with the installation onto a USB thumbdrive but the errors were a bit alarming so I thought I check with the community for input.

What I've done so far:

• Read the manual - no mention of these errors
• Redowloaded and burned image again to a fresh disc
• Ran "memtest" to ensure the memory on the computer was ok - passed (ran 5 cycles)
• Swapped out SATA CD-Rom for another CD ROM and same issue, also tried via a cheap USB cdrom and same errors
• Verified the BIOS has AHCI mode selected

Can all these errors safely be disregarded? If not, any ideas on what is occurring here?

Thanks!